Baik, H.-S., Kim, S.-Y., Shin, Y.-S., Hwang, C.-J., Cha, J.-Y., and Jung, H.-D., 2017. Precision and trueness of dental models manufactured with different 3-dimensional printing techniques. American Journal of Orthodontics and Dentofacial Orthopedics, 153 (1), 144–153.
Dawood, A., Marti, B.M., Sauret-Jackson, V., and Darwood, A., 2015. 3D printing in dentistry. British Dental Journal, 219 (11), 521–529.
Hegde, S., Ajila, V., Kamath, J.S., Babu, S., Pillai, D.S., Nair, S.M., and Department, 2018. Importance of cone-beam computed tomography in dentistry: An update. Journal of Research in Dental Sciences, 9 (4), 186–190.
Jasveer, S. and Jianbin, X., 2018. Comparison of Different Types of 3D Printing Technologies. International Journal of Scientific and Research Publications (IJSRP), 8 (4), 1–9.
Jeong, Y.-G., Lee, W.-S., and Lee, K.-B., 2018. Accuracy evaluation of dental models manufactured by CAD/CAM milling method and 3D printing method. The Journal of Advanced Prosthodontics, 10 (3), 245.
Khalil, W., Ezeldeen, M., Casteele, E. Van De, Shaheen, E., Sun, Y., Shahbazian, M., Olszewski, R., Politis, C., and Jacobs, R., 2015. Validation of cone beam computed tomography–based tooth printing using different three-dimensional printing technologies. Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology, 121 (3), 307–315.
Lee, K.Y., Cho, J.W., Chang, N.Y., Chae, J.M., Kang, K.H., Kim, S.C., and Cho, J.H., 2015. Accuracy of three-dimensional printing for manufacturing replica teeth. Korean Journal of Orthodontics, 45 (5), 217–225.
Liu, Q., Leu, M.C., and Schmitt, S.M., 2006. Rapid prototyping in dentistry: Technology and application. International Journal of Advanced Manufacturing Technology, 29 (3–4), 317–335.
Maschio, F., Pandya, M., and Olszewski, R., 2016. Experimental Validation of Plastic Mandible Models Produced by a ‘Low-Cost’ 3-Dimensional Fused Deposition Modeling Printer. Medical Science Monitor, 22, 943–957.
Petropolis, C., Kozan, D., and Sigurdson, L., 2015. Accuracy of medical models made by consumer-grade fused deposition modelling printers. Canadian Journal of Plastic Surgery, 23 (2), 91–94.
Rengier, F., Mehndiratta, A., Von Tengg-Kobligk, H., Zechmann, C.M., Unterhinninghofen, R., Kauczor, H.U., and Giesel, F.L., 2010. 3D printing based on imaging data: Review of medical applications. International Journal of Computer Assisted Radiology and Surgery, 5 (4), 335–341.
Silva, D.N., Gerhardt de Oliveira, M., Meurer, E., Meurer, M.I., Lopes da Silva, J.V., and Santa-Bárbara, A., 2008. Dimensional error in selective laser sintering and 3D-printing of models for craniomaxillary anatomy reconstruction. Journal of Cranio-Maxillofacial Surgery, 36 (8), 443–449.
Suomalainen, A., Stoor, P., Mesimäki, K., and Kontio, R.K., 2015. Rapid prototyping modelling in oral and maxillofacial surgery: A two year retrospective study. Journal of Clinical and Experimental Dentistry, 7 (5), e605–e612.
VIJAYAN, S. and ALLAREDDY, V., 2017. Accuracy of 3D-Printed Mandibles Constructed From Cbct Volumes of Different Voxel Sizes. Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology, 124 (1), e32.
Walaa Abd, El, A., Saleh, H., El, A., and Dakhli, I.I., 2018. Accuracy of three dimensional cone beam computed tomography printed images in assessment of mandibular linear measurements. Bioscience Research, 15 (4), 4196–4202.
Zaharia, C., Gabor, A.-G., Stan, A.T., Idorasi, L., Negruțiu, M.-L., Gavrilovici, A., and Sinescu, C., 2017. Digital Dentistry — 3D Printing Applications. Journal of Interdisciplinary Medicine, 2 (1), 50–53.