Al-Ekrish, A.A., Alfadda, S.A., Ameen, W., Hörmann, R., Puelacher, W., and Widmann, G., 2018. Accuracy of computer-aided design models of the jaws produced using ultra-low MDCT doses and ASIR and MBIR. International Journal of Computer Assisted Radiology and Surgery, 13 (11), 1853–1860.
Baciu, S., Câmpian, R.S., Gasparik, C., Dudea, D., Burde, A.V., and Manole, M., 2017. Three-Dimensional Accuracy Evaluation of Two Additive Manufacturing Processes in the Production of Dental Models. Key Engineering Materials, 752 (January 2018), 119–125.
Chaudhary, R., Doggalli, N., Chandrakant, H., and Patil, K., 2018. Current and Evolving Applications of Three‑dimensional Printing in Forensic Odontology: A Review. Truth from Untruth: Dental Pulp and Its Role in Forensic Odontology – A Retrospective Review, 3, 59–65.
Dawood, A., Marti, B.M., Darwood, A., and Sauret-Jackson, V., 2015. 3D printing in dentistry. British Dental Journal, 219 (11), 521–529.
Huotilainen, E., Jaanimets, R., Tuomi, J., Mäkitie, A., and Wolff, J., 2013. Inaccuracies in additive manufactured medical skull models caused by the DICOM to STL conversion process. Journal of Cranio-Maxillo-Facial Surgery, 1–7.
Latief, A., Suhardi, P., and Badri, C., 2017. Three-dimensional model printing in oral and maxillofacial reconstructive surgery: Comparison of three-dimensional models and multislice computed tomography scans. International Journal of Applied Pharmaceutics, 9 (2), 74–78.
Maschio, F., Pandya, M., and Olszewski, R., 2016. Experimental Validation of Plastic Mandible Models Produced by a “Low-Cost” 3-Dimensional Fused Deposition Modeling Printer. Medical Science Monitor, 22, 943–957.
Mohammed, M.I., P. Fitzpatrick, A., and Gibson, I., 2017. Customised design of a patient specific 3D printed whole mandible implant. The International Conference on Design and Technology, KEG, 104–111.
Nizam, A., R., G., N.L., N., A.B., H., and A.R., S., 2006. Dimensional Accuracy of the Skull Models Produced by Rapid Prototyping Technology Using Stereolithography Apparatus. Archives of Orofacial Sciences, 1, 60–66.
Ogden, K.M., Aslan, C., Ordway, N., Diallo, D., Tillapaugh-Fay, G., and Soman, P., 2015. Factors Affecting Dimensional Accuracy of 3-D Printed Anatomical Structures Derived from CT Data. Journal of Digital Imaging, 28 (6), 654–663.
Olszewski, R., Szymor, P., and Kozakiewicz, M., 2014. Accuracy of three-dimensional, paper-based models generated using a low-cost, three-dimensional printer. Journal of Cranio-Maxillofacial Surgery, 42 (8), 1847–1852.
Orentlicher, G., Goldsmith, D., and Horowitz, A., 2010. Applications of 3-dimensional virtual computerized tomography technology in oral and maxillofacial surgery: Current therapy. Journal of Oral and Maxillofacial Surgery, 68 (8), 1933–1959.
Petropolis, C., Kozan, D., and Sigurdson, L., 2015. Accuracy of medical models made by consumer-grade fused deposition modelling printers. Canadian Journal of Plastic Surgery, 23 (2), 91–94.
Rengier, F., Mehndiratta, A., Von Tengg-Kobligk, H., Zechmann, C.M., Unterhinninghofen, R., Kauczor, H.U., and Giesel, F.L., 2010. 3D printing based on imaging data: Review of medical applications. International Journal of Computer Assisted Radiology and Surgery, 5 (4), 335–341.
Salmi, M., Tuomi, J., Paloheimo, K.-S., Wolff, J., and Mäkitie, A., 2013. Accuracy of medical models made by additive manufacturing (rapid manufacturing). Journal of Cranio-Maxillofacial Surgery, 41 (7), 603–609.
Wang, C.S., Wang, W.H.A., and Lin, M.C., 2010. STL rapid prototyping bio-CAD model for CT medical image segmentation. Computers in Industry, 61 (3), 187–197.
Widmann, G. and Al-Ekrish, A.A., 2018. Ultralow Dose MSCT Imaging in Dental Implantology. The Open Dentistry Journal, 12 (Suppl-1, M5), 87–93.
Rebong, R.E., Stewart, K.T., Utreja, A., and Ghoneima, A.A., 2018. Accuracy of three-dimensional dental resin models created by fused deposition modeling, stereolithography, and Polyjet prototype technologies: A comparative study. Angle Orthodontist, 88 (3), 363–369.