1. He YZ, Li MC, Meng ZQ et al. (2021) An overview of acoustic emission inspection and monitoring technology in the key components of renewable energy systems. Mechanical Systems and Signal Processing 148:107146
2. Al-Obaidi SMA, Leong MS, Hamzah RIR et al. (2012) A Review of Acoustic Emission Technique for Machinery Condition Monitoring: Defects Detection & Diagnostic. Applied Mechanics and Materials 229-231:1476-1480
3. Jayakumar T, Mukhopadhyay CK, Venugopal S et al. (2005) A review of the application of acoustic emission techniques for monitoring forming and grinding processes. Journal of Materials Processing Technology 159:48-61
4. Elasha F, Greaves M, Mba D et al. (2017) A comparative study of the effectiveness of vibration and acoustic emission in diagnosing a defective bearing in a planetry gearbox. Applied Acoustics 115:181-195
5. He KF, Li XJ, Li XC (2010) Research on feature extraction experiment for acoustic emission signal of rotor crack fault. Applied Mechanics & Materials 34-35:1005-1009
6. Zhang X, Feng NZ, Wang Y et al. (2015) Acoustic emission detection of rail defect based on wavelet transform and Shannon entropy. Journal of Sound and Vibration 339:419-432
7. Lei RD, Zhang ZY, Berto F et al. (2020) Cracking process and acoustic emission characteristics of sandstone with two parallel filled-flaws under biaxial compression. Engineering Fracture Mechanics 237:107253
8. Elforjani M, Mba D (2010) Accelerated natural fault diagnosis in slow speed bearings with Acoustic Emission. Engineering Fracture Mechanics 77:112-127
9. Gao ZY, Wang XF, Lin J et al. (2017) Online evaluation of metal burn degrees based on acoustic emission and variational mode decomposition. Measurement 103:302-310
10. Liang XL, Liu ZQ, Yao GH et al. (2019) Investigation of surface topography and its deterioration resulting from tool wear evolution when dry turning of titanium alloy Ti-6Al-4V. Tribology International 135:130-142
11. Siwawut S, Saikaew C, Wisitsoraat A et al. (2018) Cutting performances and wear characteristics of WC inserts coated with TiAlSiN and CrTiAlSiN by filtered cathodic arc in dry face milling of cast iron. International Journal of Advanced Manufacturing Technology 97:3883-3892
12. Imran M, Mativenga PT, Gholinia A et al. (2014) Comparison of tool wear mechanisms and surface integrity for dry and wet micro-drilling of nickel-base superalloys. International Journal of Machine Tools and Manufacture 76:49–60
13. Maia LHA, Abrao AM, Vasconcelos WL et al. (2015) A new approach for detection of wear mechanisms and determination of tool life in turning using acoustic emission. Tribology International 92:519-532
14. Deja M, Zieliński D (2020) Wear of electroplated diamond tools in lap-grinding of Al2O3 ceramic materials. Wear 460-461:203461
15. Zhou J, Zhang J, Zhou H et al. (2021) Wear characteristics of diamond segments on multi-blade combination saw with different diameters in granite sawing. International Journal of Refractory Metals and Hard Materials 97:105517
16. Gowthaman PS, Jeyakumar S, Saravanan BA (2020) Machinability and tool wear mechanism of Duplex stainless steel – A review. Materials Today: Proceedings 26:1423-1429
17. Ai YT, Guan JY, Fei CW et al. (2017) Fusion information entropy method of rolling bearing fault diagnosis based on n-dimensional characteristic parameter distance. Mechanical Systems & Signal Processing 88:123-136
18. Luo SY, Liao YS, Chou CC et al. (1997) Analysis of the wear of a resin-bonded diamond wheel in the grinding of tungsten carbide. Journal of Materials Processing Technology 69:289-296
19. Ma Y, Yang J (2015) Multi-sensor intelligent monitoring of high-speed grinding for brittle and hard materials. Applied Mechanics and Materials 741:309-314
20. Rmili W, Ouahabi A, Serra R et al. (2016) An automatic system based on vibratory analysis for cutting tool wear monitoring. Measurement 77:117-123
21. Li XL (2002) A brief review: acoustic emission method for tool wear monitoring during turning. Int J Mach Tool Manu 42:157-165
22. Kerkwijk B, Mulder E, Verweij H (1999) Zirconia-alumina ceramic composites with extremely high wear resistance. Advanced Engineering Materials 1:69-71
23. Ai YT, Guan JY, Fei CW et al. (2017) Fusion information entropy method of rolling bearing fault diagnosis based on n-dimensional characteristic parameter distance. Mechanical Systems and Signal Processing 88:123-136
24. Cooley JW, Tukey JW (1965) An algorithm for the machine calculation of complex Fourier series. Mathematics of computation 19:297-301
25. Lopes WN, Junior POC, Aguiar PR et al. (2021) An efficient short-time Fourier transform algorithm for grinding wheel condition monitoring through acoustic emission. The International Journal of Advanced Manufacturing Technology 113:585-603
26. Gokhale MY, Khanduja DK (2010) Time domain signal analysis using wavelet packet decomposition approach. International Journal of Communications Network & System Sciences 3:321-329
27. Stancu AG, Zhou L, Soua S (2019) Acoustic emission-based similarity analysis: a baseline convergence algorithm. Procedia Structural Integrity 17:238-245
28. Ning F, Pai PS, Mosquea S (2011) Effect of tool edge wear on the cutting forces and vibrations in high-speed finish machining of Inconel 718: an experimental study and wavelet transform analysis. International Journal of Advanced Manufacturing Technology 52:65-77
29. Yen GG, Lin K (2000) Wavelet packet feature extraction for vibration monitoring. IEEE Transactions on Industrial Electronics 47:650-667