Relationship Between Immobilization of Cells and Characterization of Binding Sites and of Cell-Free Bacteria and Immobilized Metal Biosorbents

Cell immobilization is preferred. Immobilized cells have been traditionally used for the treatment of sewage. The techniques employed for immobilization of cells are almost the same as those used for immobilization of enzymes with appropriate modications. Entrapment and surface attachment techniques are commonly used. Gels, and to some extent membranes, are employed. Certain microorganisms were found to amass metallic components at a high limit Was Known as Bacterial Biosorption, Potent metal biosorbents among microorganisms, at low pH esteems, cell divider ligands are protonated and contend essentially with metals for ocial. With expanding pH, more ligands, such as amino and carboxyl groups, could be exposed, leading to attraction between these negative charges and the metals and consequently incremental biosorption onto the cell surface. Starting with isolation and identication of heavy metal-resistant bacteria from rock ore. Studying Factors Affecting Uranium Biosorption, Optimization of bacterial growth conditions and optimum for metal uptake by free and immobilized bacterial cells. All this evidence suggest that functions groups Represented in our study are responsible for metal uptake in our bacterial biomass beside change in peaks position which assigned for its groups conrm biosorption of metal ions from waste due to ions charge interaction comparing with immobilized we found increase in no of binding sites indicate that immobilized bacterial have high eciency for metal up take which also change in peaks position which assigned for its groups conrm biosorption of metal ions from waste due to ions charge interaction, Where the high biosorption yield obtained by bacteria.

Uranium Biosorption, Optimization of bacterial growth conditions and optimum for metal uptake by free and immobilized bacterial cells. All this evidence suggest that functions groups Represented in our study are responsible for metal uptake in our bacterial biomass beside change in peaks position which assigned for its groups con rm biosorption of metal ions from waste due to ions charge interaction comparing with immobilized we found increase in no of binding sites indicate that immobilized bacterial have high e ciency for metal up take which also change in peaks position which assigned for its groups con rm biosorption of metal ions from waste due to ions charge interaction, Where the high biosorption yield obtained by bacteria.
Research is in progress to establish biosorption as a nancially reasonable strategy to trap and accumulate metals. Biosorption can serve as a tool for the recovery of precious metals (e.g., from processing solutions or seawater) and for the elimination of poisonous metals (particularly from industrial wastewaters).
(SchiewerandVolesky2000). Adsorption and microprecipitation involve the binding of electrically neutral metals without the arrival of a stoichiometric amount of previously bound ions. In precipitation reactions, the main impetus is the interaction between the solute and the solvent, whereas the adsorption a nity among the sorbent and sorbate is the driving force. On account of the physicochemical mechanism by which interactions are based on physical adsorption, ion exchange, and complexion between metal and functional groups of the cell surface, metal binding does not depend on cellular metabolism. Tunali et al. (2006) indicated that the biosorption of lead and copper by Bacillus sp. involve a particle-exchange mechanism. Since the main mechanism involved in biosorption is ion exchange, protons compete with metal captions for the binding sites, and for this reason, pH is the operational condition that most strongly in uences the process.

Immobilization (capsulation) of Bacteria
In addition to the high biosorption yield obtained by bacteria, the heavy metal bioremediation process requires microorganisms to be attached to a solid surface. Surface xation and cell entrapment are the two methods of immobilization. Distinctive lattices were tested for cell immobilization (Beolchini et al., 2003;Xiangliang et al., 2005). Bolster frameworks appropriate for biomass immobilization incorporate alginate, polyacrylamide, polyvinyl liquor, polysulfone, silica gel, cellulose, and glutaraldehyde (Wang 2002; Vijayaraghavan and Yun 2008a, b). The polymeric grid determines the mechanical quality and synthetic protection of the last biosorbent molecule to be used for progressive sorption-desorption cycles, so it is imperative to pick the right immobilization lattice. Akar et al. (2009) measured the biosorption of 100 mgL−1 nickel at pH 6.5 to be 33.83 and 7.50 mgg−1 for silica gel and Proteusvulgaris, respectively, whereas the immobilized biosorbent had a biosorption capacity of 45.48 mgg−1 under the same conditions. Maximum biosorption obtained using immobilized biomass provides promise for immobilized cells in a column reactor for the remediation of heavy metals. At pH 5.0, the Cd 2+ biosorption capacity of E. coli biomass-free PVA beads was 1.30 mgg−1, which was signi cantly lower than the adsorption capacity of PVA-immobilized cells, displaying capacities of 2.18 and 4.41 mg/g for biomass loadings of 8.42 and 19.5 wt %, respectively (Kao et al. 2009). Although cell entrapment imparts mechanical strength and resistance to chemical and microbial degradation upon the biosorbent, the costs of immobilizing agents cannot be ignored. Free cells are not suitable for use in a column due to their low density and size, and they tend to plug the bed, resulting in marked declines in pressure. For industrial applications of biosorption, it is important to utilize an appropriate immobilization technique to prepare commercial biosorbents that retain the ability of microbial biomass to adsorb metal(s) during the continuous treatment process. The immobilization of biomass in solid structures would create a biosorbent material with the right size, mechanical strength, rigidity, and porosity necessary for use in practical processes. Immobilized materials can be used in a manner similar to ion-exchange resins and activated carbon, such as adsorption-desorption cycles (i.e., recovery of the adsorbed metal, reactivation and reuse of the biomass) (Veglio and Beolchini 1997). In different matrices, the tested surface xation was chosen as the immobilization methodology instead of cell entrapment. Cell immobilization has successfully been achieved mostly in calcium alginate beads, but this matrix also has a high a nity for heavy metals. Metal retention kinetics studies with calcium alginate con rmed that almost 100% of the

1-Sampling
U-resistant bacterial strains were separated from the rock ore using nutrient agar (NA) medium and were prepared using peptic digestion of animal tissue (5 g/L), beef extract (3 g/L), NaCl (5 g/L.) and agar 15 g/L.
2-Isolation and identi cation of heavy metal-resistant bacteria from rock ore.
The isolated metal-resistant bacteria were amended with different conc. Of U metal.
A pour plate was placed in NA medium and brooded at 37°C for 24 h.

3-Determination of heavy metal-resistant bacterial isolates by the plate diffusion method
Heavy metal-resistant bacteria were determined by the plate diffusion method (Hassen, et al. 1998). U solutions were prepared in different concentrations, i.e., 10, 20, 50, 100, 250, 500 and 1000 ppm. Each plate was spread with overnight societies of proper living beings. To each of the plates, 100 µl of appropriate U metal salt solutions were added to each well of 10 mm in diameter and 4 mm in depth. NA plates were incubated at 37°C for 24 h. After incubation, the zone of inhibition was measured.
A zone size less than 1 mm was scored as a resistance strain.

Optimization of bacterial growth conditions
Studying factor affecting bacterial growth Like pH., Temperature, the cultures were incubated at 37°C for 24,48 h and By Detecting O.D. The development was checked using a spectrophotometer (at 600 nm) 120 Min.

Preparation of E. coli Beads
We reported alginate-chitosan as an E. coli capsule.
The E. coli capsule/alginate-chitosan microcapsule was composed of E. coli sodium alginate, and calcium chloride. Therefore, under sterile conditions, the bacteria were mixed with sodium alginate solution, and then the mixed solution was dropped into calcium chloride solution for immobilization using microcapsule preparation instrument. E. coli capsule-loaded calcium alginate gel beads were obtained after immobilization, and the loaded calcium alginate gel beads were mixed with chitosan solution to obtain an E. coli capsule/alginate capsule system had good mechanical strength, exibility and biocompatibility between the E. coli capsule and the microcapsule. In addition, the internal three-dimensional network structure of the microcapsule provided su cient space for E. coli capsule growth and good encapsulating stability (Kazy, et 2000) and were maintained in a conical ask containing 50 ml of samples for incubation, after which the specimens were pulled back for substantial metal examination by utilizing the titration method.

Cultivation of E. coli.
Cultivation of E. coli. The cells were placed in 250 mL cone-shaped asks with 100 mL culture medium on a rotary shaker at 200 rpm at a constant temperature of 37°C. The culture medium contained the pH of the medium and was adjusted to (6).

Determination of Uranium:
The uranium content of the sample and prepared standard and treated solution were determined according to the method described by (Davies &gray, 1964). 9. Application of the FTIR spectra of U-loaded and unloaded free and immobilized cells & Scanning electron microscopy (SEM) Preparation of immobilized bacterial biomass beads/alginate-chitosan microcapsules was composed of E. coli sodium alginate, chitosan and calcium chloride. Therefore, under sterile conditions, the bacteria were mixed with sodium alginate solution, and then the mixed solution was dropped into calcium chloride solution for immobilization using a microcapsule preparation instrument. E. coli capsule-loaded calcium alginate gel beads were obtained after immobilization, and the loaded calcium alginate gel beads were mixed with chitosan solution to obtain E. coli capsule/alginate-chitosan microcapsules. The microcapsule system had good mechanical strength, exibility and biocompatibility between the E. coli capsule and the microcapsule. In addition, the internal three-dimensional network structure of the microcapsule provided su cient space for E. coli capsule growth and good encapsulating stability.
Results & Discussion 1. Characterization Uranium-resistant bacterial isolates 1.1. Screening of uranium-resistant bacterial isolate growth in the presence of different Uranium conc. Isolated from Aborshid Uranyle rock sample.
Ten bacterial isolate 6 stable isolates were studied to select the most potent bacterial isolate to be utilized as a bacterial capsule in our study.

Analyzed the FTIR spectra of U loaded and unloaded
We used FT-IR spectra to con rm the availability of binding sites, as shown in Table 5   All this evidence suggests that functional groups presented in Tables 4, and 5, are responsible for metal uptake in our bacterial biomass. In addition, the change in peak positions assigned to its groups con rms the biosorption of metal ions from waste due to ion charge interactions. Comparing Tables 4, and 5 and 6 we found an increase in the number of binding sites, indicating that immobilized bacteria have high e ciency for metal uptake, which also changes the peak positions assigned to its groups, con rming the biosorption of metal ions from waste due to ion charge interactions. Alginate beads (Fig. 1), predominantly ellipsoidal spheres, with an average diameter of 3-5 mm were used in the packed bed to remediate 10-1000 ppm U(VI) in a synthetic uranium solution. The effectiveness of different dosages of beads was considered, and the optimized ratio of 1:5 (v/v) of beads to water was used in all batch studies of isotherm kinetics. Scanning electron microscopy of these beads, synthetic solution (Fig. 1), and control (Fig. 2), showed that they were hollow from inside (having smooth inner walls). In SEM/EDS analysis of the Ca-alginate beads after the experiment, void spaces of the beads were found to be lled with precipitates of heavy metals, showing that Ca-alginate beads can be successfully used as a biosorbent for the removal of uranium, which agreed with (Sumin Park and Minhee Lee 2017) in substantial metal evacuations, such as Cu and Cd. The picture of the control demonstrates the nonappearance of any metal besides uranium, which is not currently present. In Figs. 1, 2, 3, and 4, and table 6, uranium is indicated, as shown in Figs. 3 and 4. In the spot zone a rmed Uranium biosorption. (Fig. 3). This established the fact that E. coli interacted with the metal present in the medium.  Immobilized individual enzymes can be successfully used for single-step reactions. They are, however, not suitable for multienzyme reactions and for reactions requiring cofactors. Whole cells or cellular organelles can be immobilized to serve as multienzyme systems. In addition, immobilized cells rather than enzymes are sometimes preferred even for single reactions due to the cost factor in isolating enzymes. For enzymes that depend on the special arrangement of the membrane, cell immobilization is preferred. Immobilized cells have been traditionally used for the treatment of sewage. The techniques employed for immobilization of cells are almost the same as those used for immobilization of enzymes with appropriate modi cations. Entrapment and surface attachment techniques are commonly used. Gels, and to some extent membranes, are employed.
Immobilized live Cells: The viability of the cells can be preserved by mild immobilization. Such immobilized cells are particularly useful for fermentations. Sometimes mammalian cell cultures are made to function as immobilized viable cells.
In many instances, immobilized nonviable cells are preferred over enzymes or even viable cells. This is mainly because of the costly isolation and puri cation processes. The best example is the immobilization of cells containing glucose isomerase for the industrial production of high fructose syrup.

Conclusion:
Data showed that bacterial isolate can treat different forms of wastes and show that immobilized bacterial isolate gain high protection enable it to treat waste with high acidity like Phosphoric acid while free cell of the same bacterial isolate can not treat this type of waste so cannot complete biosorption process with the same e ciency so we found that immobilized bacterial isolates with biosorption e ciency reach 100% and 90%, respectively in case of standard Uranium, and Phosphoric acid, where immobilization Provide high number of active sites as mentioned above in Table 4, 5 entrapment imparts mechanical strength and resistance to chemical and microbial degradation upon the biosorbent, the costs of immobilizing agent cannot be ignored. Free cells are not suitable for use in a column; due to their low density and size, they tend to plug the bed, resulting in marked declines in pressure. For industrial applications, as in our study we made alginate beads like (capsule) of biosorption, it is important to utilize an appropriate immobilization technique to prepare commercial biosorbents, which retain the ability of microbial biomass to adsorb metal(s) during the continuous treatment process. The immobilization of biomass in solid structures would create a biosorbent material with the right size, mechanical strength, rigidity, and porosity necessary for use in practical processes. (EDX) to con rm the biosorption of U by capsulated cell-free extract-loaded Ca-alginate beads. (EDX) to con rm Biosorption of U by capsulated Cell-Free Extract Loaded Ca-Alginate Beads Bioremediation of 600 ppm U(VI) from synthetic solution in the bottle