[1] A. Kojima, K. Teshima, Y. Shirai, et T. Miyasaka, « Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells », J. Am. Chem. Soc., vol. 131, no 17, p. 6050‑6051, mai 2009, doi: 10.1021/ja809598r.
[2] Y. Raoui, H. Ez-Zahraouy, N. Tahiri, O. El Bounagui, S. Ahmad, et S. Kazim, « Performance analysis of MAPbI3 based perovskite solar cells employing diverse charge selective contacts: Simulation study », Sol. Energy, vol. 193, p. 948‑955, nov. 2019, doi: 10.1016/j.solener.2019.10.009.
[3] H. Shaili, « Synthesis of the Sn-based CaSnS3 chalcogenide perovskite thin film as a highly stable photoabsorber for optoelectronic applications », J. Alloys Compd., p. 9, 2021.
[4] K. Kuhar et al., « Sulfide perovskites for solar energy conversion applications: computational screening and synthesis of the selected compound LaYS 3 », Energy Environ. Sci., vol. 10, no 12, p. 2579‑2593, 2017, doi: 10.1039/C7EE02702H.
[5] M. Buffiere, D. S. Dhawale, et F. El-Mellouhi, « Chalcogenide Materials and Derivatives for Photovoltaic Applications », Energy Technol., vol. 7, no 11, p. 1900819, nov. 2019, doi: 10.1002/ente.201900819.
[6] A. Swarnkar, W. J. Mir, R. Chakraborty, M. Jagadeeswararao, T. Sheikh, et A. Nag, « Are Chalcogenide Perovskites an Emerging Class of Semiconductors for Optoelectronic Properties and Solar Cell? », Chem. Mater., vol. 31, no 3, p. 565‑575, févr. 2019, doi: 10.1021/acs.chemmater.8b04178.
[7] X. Wei et al., « Ti-Alloying of BaZrS 3 Chalcogenide Perovskite for Photovoltaics », ACS Omega, vol. 5, no 30, p. 18579‑18583, août 2020, doi: 10.1021/acsomega.0c00740.
[8] H. Zitouni, N. Tahiri, O. El Bounagui, et H. Ez-Zahraouy, « Electronic, optical and transport properties of perovskite BaZrS3 compound doped with Se for photovoltaic applications », Chem. Phys., vol. 538, p. 110923, oct. 2020, doi: 10.1016/j.chemphys.2020.110923.
[9] M. G. Helander, M. T. Greiner, Z. B. Wang, W. M. Tang, et Z. H. Lu, « Work function of fluorine doped tin oxide », J. Vac. Sci. Technol. Vac. Surf. Films, vol. 29, no 1, p. 011019, janv. 2011, doi: 10.1116/1.3525641.
[10] M. Rouchdi, E. Salmani, B. Fares, N. Hassanain, et A. Mzerd, « Synthesis and characteristics of Mg doped ZnO thin films: Experimental and ab-initio study », Results Phys., vol. 7, p. 620‑627, 2017, doi: 10.1016/j.rinp.2017.01.023.
[11] M. M. Tavakoli, P. Yadav, R. Tavakoli, et J. Kong, « Surface Engineering of TiO 2 ETL for Highly Efficient and Hysteresis-Less Planar Perovskite Solar Cell (21.4%) with Enhanced Open-Circuit Voltage and Stability », Adv. Energy Mater., vol. 8, no 23, p. 1800794, août 2018, doi: 10.1002/aenm.201800794.
[12] B. Parida, A. Singh, M. Oh, M. Jeon, J.-W. Kang, et H. Kim, « Effect of compact TiO2 layer on structural, optical, and performance characteristics of mesoporous perovskite solar cells », Mater. Today Commun., vol. 18, p. 176‑183, mars 2019, doi: 10.1016/j.mtcomm.2018.12.007.
[13] S. Fantacci, F. De Angelis, M. K. Nazeeruddin, et M. Grätzel, « Electronic and Optical Properties of the Spiro-MeOTAD Hole Conductor in Its Neutral and Oxidized Forms: A DFT/TDDFT Investigation », J. Phys. Chem. C, vol. 115, no 46, p. 23126‑23133, nov. 2011, doi: 10.1021/jp207968b.
[14] M. Kumar, A. Singh, D. Gill, et S. Bhattacharya, « Optoelectronic Properties of Chalcogenide Perovskites by Many-Body Perturbation Theory », J. Phys. Chem. Lett., vol. 12, no 22, p. 5301‑5307, juin 2021, doi: 10.1021/acs.jpclett.1c01034.
[15] Y. Raoui, H. Ez-Zahraouy, S. Kazim, et S. Ahmad, « Energy Level Engineering of Charge Selective Contact and Halide Perovskite by Modulating Band Offset: Mechanistic Insights », preprint, mai 2020. doi: 10.26434/chemrxiv.12367505.v1.
[16] None Available, « Materials Data on BaZrS3 by Materials Project ». LBNL Materials Project; Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States), 2020. doi: 10.17188/1264764.
[17] Y. Ahmed, « Fill Factor and Efficiency », 24 Solar Home, oct. 31, 2013. http://24solarhome.com/fill-factor-and-efficiency/ (consulté le oct. 17, 2021).
[18] K. Chakraborty, M. G. Choudhury, et S. Paul, « Numerical study of Cs2TiX6 (X = Br−, I−, F− and Cl−) based perovskite solar cell using SCAPS-1D device simulation », Sol. Energy, vol. 194, p. 886‑892, déc. 2019, doi: 10.1016/j.solener.2019.11.005.
[19] R. N. Chauhan, C. Singh, R. S. Anand, et J. Kumar, « Effect of Sheet Resistance and Morphology of ITO Thin Films on Polymer Solar Cell Characteristics », Int. J. Photoenergy, vol. 2012, p. 1‑6, 2012, doi: 10.1155/2012/879261.
[20] K. Tan, P. Lin, G. Wang, Y. Liu, Z. Xu, et Y. Lin, « Controllable design of solid-state perovskite solar cells by SCAPS device simulation », Solid-State Electron., vol. 126, p. 75‑80, déc. 2016, doi: 10.1016/j.sse.2016.09.012.
[21] Md. S. Rahman, S. Miah, M. S. W. Marma, et T. Sabrina, « Simulation based Investigation of Inverted Planar Perovskite Solar Cell with All Metal Oxide Inorganic Transport Layers », in 2019 International Conference on Electrical, Computer and Communication Engineering (ECCE), Cox’sBazar, Bangladesh, févr. 2019, p. 1‑6. doi: 10.1109/ECACE.2019.8679283.
[22] B. M. Soucase, I. Guaita Pradas, et K. R. Adhikari, « Numerical Simulations on Perovskite Photovoltaic Devices », in Perovskite Materials - Synthesis, Characterisation, Properties, and Applications, L. Pan et G. Zhu, Éd. InTech, 2016. doi: 10.5772/61751.
[23] U. Mandadapu, Department of Physics, Madanapalle Institute of Technology and Science, Madanapalle - 517325, Chittoor, Andhra Pradesh, India, S. V. Vedanayakam, Department of Physics, Madanapalle Institute of Technology and Science, Madanapalle - 517325, Chittoor, Andhra Pradesh, India, K. Thyagarajan, et Department of Physics, JNTU College of Engineering Pulivendula - 516390, Andhra Pradesh, India, « Simulation and Analysis of Lead based Perovskite Solar Cell using SCAPS-1D », Indian J. Sci. Technol., vol. 10, no 11, p. 1‑8, mars 2017, doi: 10.17485/ijst/2017/v10i11/110721.
[24] S. Abdelaziz, A. Zekry, A. Shaker, et M. Abouelatta, « Investigating the performance of formamidinium tin-based perovskite solar cell by SCAPS device simulation », Opt. Mater., vol. 101, p. 109738, mars 2020, doi: 10.1016/j.optmat.2020.109738.
[25] P. Roy, N. Kumar Sinha, et A. Khare, « An investigation on the impact of temperature variation over the performance of tin-based perovskite solar cell: A numerical simulation approach », Mater. Today Proc., vol. 39, p. 2022‑2026, 2021, doi: 10.1016/j.matpr.2020.09.281.
[26] C. Comparotto et al., « Chalcogenide Perovskite BaZrS 3 : Thin Film Growth by Sputtering and Rapid Thermal Processing », ACS Appl. Energy Mater., vol. 3, no 3, p. 2762‑2770, mars 2020, doi: 10.1021/acsaem.9b02428.
[27] « Quantum efficiency », Wikipedia. nov. 01, 2021. Consulté le: janv. 11, 2022. [En ligne]. Disponible sur: https://en.wikipedia.org/w/index.php?title=Quantum_efficiency&oldid=1053106456