Genome editing using a versatile vector-based CRISPR/Cas9 system in Fusarium species

doi:10.21203/rs.3.rs-1593121/v1

Download PDF

Article

Genome editing using a versatile vector-based CRISPR/Cas9 system in Fusarium species

https://doi.org/10.21203/rs.3.rs-1593121/v1

This work is licensed under a CC BY 4.0 License

You are reading this latest preprint version

Fusarium species include important filamentous fungal pathogens that can infect plants, animals, and humans. Meanwhile, some nonpathogenic Fusarium species are promising biocontrol agents against plant pathogens. Here, we developed a genome editing technology using a vector-based CRISPR/Cas9 system for Fusarium oxysporum f. sp. lycopersici (Fol). This optimized CRISPR/Cas9 system, harboring an endogenous U6 small nuclear RNA promoter for the expression of single-guide RNA and an endogenous H2B nuclear localization signal for the localization of Cas9, enabled efficient targeted gene knock-out, including in the accessory chromosomal regions in Fol. We further demonstrated single crossover-mediated targeted base editing and endogenous gene tagging. This system was also applicable for genome editing in F. oxysporum f. sp. spinaciae and F. commune without any modifications, suggesting that this CRISPR/Cas9 vector has a potential application for a broad range of researches on other Fusarium species.

The genus Fusarium belongs to ascomycetes, and the genus includes over 1,500 species¹. Fusarium species are widely distributed in the environment, and its several strains are capable of causing serious diseases in plants, animals, and humans¹. F. oxysporum, a species of the genus Fusarium, is also widely distributed in various environments, including the phytosphere and rhizosphere, and the species again includes strains that are plant, human, and animal pathogens and many nonpathogens. Plant pathogenic F. oxysporum is famous as a soilborne pathogen that infects host plants via the roots. The pathogen eventually colonizes the vascular tissues and causes systemic yellowing, wilting, and death in plants by blocking the vessel translocation of water and nutrients¹. Although F. oxysporum causes diseases in various plants, individual strains show selective pathogenicity and are classified into forms (formae speciales, f. sp.) based on their host species². For example, F. oxysporum isolates responsible for tomato (Solanum lycopersicum) wilt belong to the f. sp. lycopersici; similarly, those causing wilting on spinach (Spinacia oleracea) belong to the f. sp. spinaceae. These pathogenic F. oxysporum strains carry accessory chromosomes (ACs), which are nonessential for their growth in contrast to the core chromosomes³. ACs harbor lineage- or strain-specific genomic and structural compositions, such as unique genes, different codon usage biases, and rich transposable elements (TEs)³. In addition, ACs have many pathogenicity-related factors, and are directly linked to host-specific pathogenicity in some plant pathogenic F. oxysporum^4–7. ACs of pathogenic strains are capable of being horizontally transferred to nonpathogenic strains, which lead the nonpathogenic strains to gain pathogenicity. However, little is known about the molecular mechanisms of host specificity, and functional analysis of these genes in ACs is often hampered by TE-enriched traits.

Nonpathogenic Fusarium strains are often isolated from asymptomatic crop plants and are capable of colonizing plant roots without inducing any disease symptoms. The nonpathogenic F. oxysporum isolate Fo47 showed several modes of action contributing to its direct or indirect biocontrol capacities, such as competition with the pathogens for nutrients and habitations, and induction of plant defenses against pathogens^8–10. Recently, a novel technique to control Bakanae disease, caused by F. fujikuroi, using the nonpathogenic F. commune isolate W5 was reported¹¹. Spray treatment with W5 reduced pathogen invasion of rice flowers, and W5 was transmitted to the next plant generation via seeds. However, the detailed molecular mechanisms of the biocontrol capacity of these nonpathogenic fungi have not been elucidated. Efficient and versatile genome manipulation tools would facilitate the study of the capacity of nonpathogenic biological agents.

Clustered regularly interspaced short palindromic repeats (CRISPR)/ CRISPR-associated protein (Cas) systems have revolutionized RNA-guided genome editing technology¹². The type II CRISPR/Cas9 system from Streptococcus pyogenes (SpCas9) is widely used as a genome editing tool in various organisms^13–15. The single-guide (sg) RNA/Cas9 ribonucleoprotein (RNP) complex can introduce a site-specific DNA double-strand break (DSB) at the hybridizing locus of the sgRNA/target DNA. One limitation of this genome editing tool is the protospacer-adjacent motif (PAM); in the case of SpCas9, the 5′-NGG-3′ motif is required for effective cleavage of the target site. DSBs are repaired by two competing pathways in most filamentous fungal cells: non-homologous end joining (NHEJ) repair and homologous recombination (HR) repair. NHEJ-mediated genome editing can introduce insertions and/or deletions (indels) at the target site without donor DNAs; therefore, this strategy is effective in cells with low HR efficiency, such as animal and plant cells. However, the mutation type cannot be controlled, and large deletions often occur during DNA repair in the absence of donor sequences in the filamentous fungal genome^16,17. In contrast to animals and plants, HR repair can be induced by DNA cleavages in many filamentous fungi, which enables to introduce precise mutations, such as targeted gene knock-out, knock-in, and replacement. In the rice blast fungus Pyricularia oryzae (Magnaporthe oryzae), site-specific DSB could induce single crossover-type HR, which occurs DNA strand exchanges between the cleaved DNA and donor plasmid DNA. Single crossover-mediated genome editing enabled efficient targeted gene disruption, base editing, and endogenous gene tagging¹⁸, but the feasibility of this strategy in other fungi has not been validated.

Genome editing using the CRISPR/Cas9 system has rapidly developed in filamentous fungi, including Fusarium species^17,19. In F. oxysporum f. sp. vasinfectum (Fov), which causes destructive diseases in cotton, an in vitro-assembled Cas9 RNP complex was used as a genome editing tool, and the maximum efficiency of targeted gene disruption and endogenous gene tagging was elevated up to 50%^20,21. However, efficient genome editing targeting the AC regions has not been validated. To the best of our knowledge, CRISPR/Cas9-based genome editing has been applied to F. solani var. petroliphilum²², F. proliferatum²³, F. venenatum²⁴, and F. graminearum²⁵. In F. solani and F. proliferarum, an in vitro-assembled Cas9 RNP complex has also been used for genome editing. In F. graminearum, a vector-based CRISPR/Cas9 system was used for genome editing, but its efficiency was very low without counter selection. In F. venenatum, an AMA1-based self-replication plasmid was used for the transient expression of the CRISPR/Cas9 system, but this system and strategy can be used for limited fungal species. In this study, we developed a vector-based CRISPR/Cas9 system and demonstrated highly efficient targeted gene knock-out, knock-in, and replacement, including in AC regions in F. oxysporum f. sp. lycopersici (Fol). The developed system was also applied to genome editing in F. oxysporum f. sp. spinaciae (Fos) and F. commune without any modifications to the CRISPR/Cas9 vector.

Development of optimized CRISPR/Cas9 vector and HR-mediated targeted gene knock-out

We previously established a vector-based CRISPR/Cas9 system for the rice blast fungus P. oryzae²⁶. To optimize this system for Fol, an endogenous U6 promoter was isolated and exchanged for that of P. oryzae on the vector (Fig. 1A; pCRISPR/Cas9-FoU6). The nuclease activity of the modified CRISPR/Cas9 vector was evaluated by the efficiency of HR-mediated targeted gene knock-out of the Ku80, Ku70, and Lig4 genes (Fig. 1B), which are involved in NHEJ-mediated repair^27,28. CRISPR/Cas9 and donor vectors targeting each gene were simultaneously introduced into the protoplasts. The number of hygromycin B-resistant colonies was increased by co-introduction of CRISPR/Cas9 and donor vectors, compared with that of only donor vectors (Fig. 1C). PCR analysis showed that the use of the CRISPR/Cas9 vector increased the knock-out efficiency of Ku80 (80%) and Ku70 (77%) but that was low in Lig4 (17%) (Fig. 1C). Because a nuclear localization signal derived from Simian virus 40 (Sv40 NLS) was not suitable for translocation of Cas9 into the nucleus in some fungi^20,29, the signal at the N-terminus of Cas9 was replaced by the endogenous histone H2B NLS (H2B NLS) in Fol (Fig. 1A; pCRISPR/Cas9-FoU6-FoNLS). Using the improved CRISPR/Cas9 system, knock-out efficiencies were elevated up to 100% for all the three genes (Fig. 1D). We further evaluated the system by disrupting the bacterial alpha/beta hydrolase-like protein (ABHL) gene and SIX1 gene, which are located in the AC region (contig14) of the Fol isolate 4287 genome. In the case of ABHL, 1000 bp homology arms were used for the disruption, and in SIX1, the homology arms (FL: 706 bp; FR: 896 bp) were used for the deletion of a part of SIX1 (Fig. S1). The knock-out efficiency of ABHL and SIX1 using the CRISPR/Cas9 system was 70% and 86%, respectively (Fig. 1E). These results demonstrated that the optimized CRISPR/Cas9 system enabled the effective introduction of DSBs into the targeted genes and was applicable for efficient genome editing, including in the AC regions in Fol.

Although HR-mediated genome editing was effective in Fol, the acquisition of homology arms of sufficient length is often prevented by existing TEs and/or repetitive elements. Thus, we attempted to develop a short homology arm-mediated gene disruption strategy. We truncated the homology arms (1000, 750, 500, 250, 100, or 50 bp) of the donor vector by PCR (Fig. 2A). The amplified fragments and CRISPR/Cas9 vector targeting Ku80, Lig4, or ABHL were co-introduced into the protoplasts. PCR analysis showed that the shortened fragment type donor DNA could be used for targeted gene disruption, although the number of transformants and disruption efficiencies tended to depend on the length of the homology arms and the target gene locus (Fig. 2B).

Single crossover-mediated targeted base editing and endogenous gene tagging

We previously succeeded in single crossover-mediated targeted base editing and endogenous gene tagging in P. oryzae¹⁸. To evaluate this strategy in Fol, the Ku80 region containing point mutations (silent mutations) at the CRISPR/Cas9 target site was obtained as a single homology arm (Fig. 3A). CRISPR/Cas9 and donor vectors were simultaneously introduced into the protoplasts, and 24 independent hygromycin B-resistant colonies were obtained. Ten randomly picked up colonies were sequenced around the CRISPR target site, and the analysis showed that all the colonies (100%) contained the desired mutations at the target site (Fig. 3B). To investigate whether the single crossover-type HR can also be exploited for endogenous gene tagging in Fol, GFP-fused Ku80 with silent mutations was used for the homology arm (Fig. 3C). All 10 of the randomly selected independent hygromycin B-resistant colonies contained the desired mutations at the target site (100%) and showed nuclear-localized GFP fluorescence (Fig. 3D). These results indicated that the CRISPR/Cas9-mediated DSBs enabled efficient single crossover-mediated targeted base editing and endogenous gene tagging in Fol.

Genome editing using the vector-based CRISPR/Cas9 system in other Fusarium species

To investigate whether the developed CRISPR/Cas9 system can be used for other Fusarium species, we conducted genome editing in Fos isolate Spin2SA, the causal agent of Fusarium wilt of spinach, and F. commune isolate W5, a nonpathogenic biological control agent for F. fujikuroi. In these isolates, the transformation efficiency was lower than that of Fol. First, we evaluated the nuclease activity of the CRISPR/Cas9 vector by HR-mediated genome editing in Fos Spin2SA (Fig. 4A). The co-introduction with donor and CRISPR/Cas9 vectors increased the number of transformants, and the knock-out efficiencies of Ku80, Ku70, and Lig4 were 63%, 64%, and 79%, respectively (Fig. 4B). Next, we employed the same strategy for F. commune W5 genome editing. In F. graminearum, the secondary metabolite biosynthesis cluster fg3_54 has been identified as a virulence factor required for cell-to-cell invasion of wheat³⁰. Interestingly, we identified an fg3_53-like gene cluster in the nonpathogenic F. commune W5, and an fgm4-like gene (W5-fgm4), a homolog of a pathway-specific bANK-like regulatory gene in F. graminearum³⁰, was selected as the target gene (Fig. 4C). The introduction with only the donor vector could not produce any hygromycin B-resistant colonies, while 12 resistant colonies were obtained by the co-introduction with CRISPR/Cas9 and donor vectors. In addition, 10 out of 12 transformants (83.3%) were identified as disrupted mutants (Fig. 4D). These results indicated that the developed CRISPR/Cas9 system for Fol efficiently functioned in Fos and F. commune without any modifications.

In this study, we developed a vector-based CRISPR/Cas9 system optimized for Fol and demonstrated highly efficient targeted gene knock-out, knock-in, and replacement strategies, including a part of AC regions. In addition, we demonstrated a short homology arm-mediated targeted gene disruption, which would allow for the disruption of genes located in TE-enriched AC regions using short homologous sequences. Pathogenicity-related ACs have been analyzed using the chromosome-deficient strains that completely or partially lost ACs^5,31−33. The developed CRISPR system would provide the additional strategy for efficient functional analysis of the individual genes on ACs. We also demonstrated the application of the CRISPR/Cas9 system for genome editing in Fos and F. commune without any modifications to the vector, suggesting that this system functions in a broad range of Fusarium species. We have confirmed the activity of this vector in F. oxysporum ff. spp. conglutinans, pisi, and raphani (data not shown). As the transient expression of CRISPR/Cas9 vector in fungal protoplasts not only improved the genome editing efficiency but also increased the number of transformants^17,18,26, this strategy would be effective in Fusarium species with low protoplast isolation and/or transformation efficiencies.

We succeeded in efficient single-crossover-mediated targeted base editing and gene tagging in Fol. This strategy enables the introduction of perfectly designed mutations and one-step reporter gene knock-in at the desired genomic locus. Recently, a novel base editing technology, called prime editing (PE), was developed by using a nickase type Cas9 (Cas9^H840A)-fused reverse transcriptase and a modified sgRNA (pegRNA)³⁴. PE can introduce desired mutations at the nicked site without DSBs and donor DNAs but the expression of reverse transcriptase, insertion of the donor template at the 3’ end of pegRNA, and adequate PAM sequence are required. The donor vector for single crossover-mediated base editing can be constructed by one-step cloning, and any modifications of CRISPR/Cas9 are not needed. Further, this strategy can avoid the limitation of PAM sequence, though efficient HR induction is required. In Fov, homology-independent targeted integration (HITI) and homology-dependent recombination integration (HDRI) strategies have been established for endogenous gene tagging²¹. HITI enabled a large DNA fragment (~ 8 kb) integration including reporter genes but this strategy depends on a precise NHEJ repair at the cleaved DNA ends. Therefore, this process may cause frame shift mutations by incorrect ligations at the junction points of the products and cannot designate the direction of donor DNA fragments. HDRI depends on the double crossover-type or gene conversion-type HR. This strategy enabled the precise integration of donor DNAs at the target locus but it may be difficult to integrate large DNA fragments. Single crossover-mediated strategy enables an efficient and precise knock-in including large DNA integrations. Because single crossover-type HR was also detected in F. oxysporum ff. spp. spinaceae and rahpani, and F. commune (data not shown), this repair mechanism might be conserved in many filamentous fungi and would be applicable for a wide range of fungal genome editing.

Various CRISPR/Cas homologs and orthologs have been identified from a broad range of bacteria and archaea, and their application in flexible genome editing is now expanding³⁵. In addition to genome editing, novel CRISPR systems and tools have been developed to perform gene regulation, epigenetic editing, and RNA editing³⁶. One of the advantages of the vector-based CRISPR system is that it can be quickly modified and optimized for various types of CRISPR tools and organisms. Furthermore, the vector-based CRISPR system enables us to skip the procedures of in vitro sgRNA synthesis and Cas protein purification. Therefore, this system would be an additional tool for simple and effective genome editing in Fusarium species. Our approach for optimization of the CRISPR/Cas9 system and the development of genome editing strategies would help progress other fungal genome editing studies. We anticipate that the development of genome editing strategies can expand the scope of a variety of basic and applied biological studies on Fusarium species and other filamentous fungi.

Fungal isolates, growth conditions, and DNA analysis

Fol isolate MAFF 103036 (race 1), Fos isolate Spin2SA, and F. commune isolate W5 were used in this study. These isolates were cultured on potato dextrose agar (PDA; 200 g/L potato broth, 0.5% (w/v) glucose, 1.5% (w/v) agar or Nissui Pharmaceutical Co.) or YG agar medium (0.5% (w/v) yeast extract, 2% (w/v) glucose, 1.5% agar) and stored in 25% (v/v) glycerol at -80°C. PCR and sequencing analyses were performed using standard procedures^{11,19,37−39}. The primers and oligonucleotides used in this study are listed in Table S1.

Optimization and construction of CRISPR/Cas9 vectors

The endogenous U6 promoter region of Fol with the Esp3 I site was synthesized and inserted into the Not I and Sph I sites of pCRISPR/Cas U6-1²⁵, resulting in pCRISPR/Cas9-FoU6. The full sequence of the sgRNA expression cassette is shown in Fig. S2. The N-terminal Cas9 region attached to the NLS of histone H2B in Fol was created using fusion PCR. For the first PCR, the N-terminal Cas9 and NLS regions were amplified from pCRISPR/Cas9-FoU6 using an NLSCas9-1/-2 primer set and from the Fol genome using an NLSCas9-3/-4 primer set, respectively. The PCR products obtained from the first PCR were mixed and fused by a second PCR performed using an NLSCas9-1/-4 primer set. The N-terminal Cas9 region with NLS generated by fusion PCR was cloned between the Asc I and Nde I sites of pCRISPR/Cas9-FoU6, resulting in pCRISPR/Cas9-FoU6-FoNLS.

For the construction of CRISPR/Cas9 expression vectors targeting endogenous genes, each oligonucleotide set of Ku80-gRNA-1/-2, Ku70-gRNA-1/-2, Lig4-gRNA-1/-2, ABHL-gRNA-1/-2, SIX1-gRNA-1/-2, or Fgm4-gRNA-1/-2 was annealed according to the procedures of a previous report ^25,29. The annealed oligonucleotides were inserted into pCRISPR/Cas9-FoU6 or pCRISPR/Cas9-FoU6-FoNLS via the Golden Gate cloning method according to a previous report^25,29,39. CRISPR/Cas9 expression vectors for Ku80, Ku70, and Lig4 were also used for Fos genome editing.

Construction of donor vectors and DNA fragments

For the construction of the knock-out vector for Ku80, the flanking regions were amplified using the primer sets of TKu80-1/-2 and TKu80-3/4. The PCR product generated by the TKu80-1/-2 primer set was inserted between the Sph I and Xho I sites of pMK-dGFP³⁷, resulting in pMK-Ku80-FL. The PCR product generated by the TKu80-3/4 primer set was inserted between the Hind III and Spe I sites of pMK-Ku80-FL, which produced the donor vector for the knock-out of Ku80 (pMK-Ku80-FLFR). For the construction of the knock-out vector for Ku70, the flanking regions were amplified using each primer set of TKu70-1/-2 or TKu70-3/-4. The PCR product generated by the TKu70-1/-2 primer set was inserted between the Kpn I and Sph I sites of pMK-dGFP (pMK-Ku70-FL). The PCR product generated by the TKu70-3/-4 primer set was inserted between the Hind III and Not I sites of pMK-Ku70-FL, which produced the donor vector for the knock-out of Ku70 (pMK-Ku70-FLFR). For the construction of the knock-out vector for Lig4, the flanking regions were amplified using each primer set of TLig4-1/-2 or TLig4-3/-4. The PCR product generated by the TLig4-1/-2 primer set was inserted between the Kpn I and Sph I sites of pMK-dGFP (pMK-Lig4-FL). The PCR product generated by the TLig4-3/-4 primer set was inserted between the Sal I and Spe I sites of pMK-Lig4-FL, which produced the donor vector for the knock-out of Lig4 (pMK-Lig4-FLFR). For the construction of the knock-out vector for ABHL, the flanking regions were amplified using each primer set of TABHL1-1/-2 or TABHL-3/-4. The PCR product generated by the TABHL-1/-2 primer set was inserted between the Kpn I and Xho I sites of pMK-dGFP (pMK-ABHL-FL). The PCR product generated by the TABHL-3/-4 primer set was inserted between the Hind III and Sac I sites of pMK-ABHL-FL, which produced in the donor vector for ABHL knock-out (pMK-ABHL-FLFR). For the construction of the knock-out vector for SIX1, the PCR products generated by each primer set of SIX1_P1/P2 or SIX1_P3/P4 were mixed with the hph cassette, amplified from pCSN43⁴² using a SIX1_pCSN_F/R primer set, and fused by PCR using a SIX1_P1/P4 primer set. The PCR product was attached to an adenine at the ends using a 10×A-attachment mix (TOYOBO) according to the manufacturer’s protocol and cloned into pCR-XL-TOPO (Thermo Fisher Scientific), which produced in the donor vector for the knock-out of SIX1 (pCSN43-SIX1-FLFR). For the construction of the knock-out vector for W5-fgm4, the PCR products generated by each primer set of fgm4_P1/P2 or fgm4_P3/P4 were mixed with the hph cassette, amplified from pCSN43 using a fgm4_pCSN43_F/R primer set, and fused by PCR using an Fgm4_P1/P4 primer set. The PCR product was attached to adenine at the ends by the 10×A-attachment mix and cloned into pCR-XL-TOPO, which produced in the donor vector for the knock-out of W5-fgm4 (pCSN43-W5-fgm4-FLFR).

For the construction of the donor DNA fragments with truncated short homology arms, fragments with 1000, 750, 500, 250, 100, and 50 bp homology arms for Ku80 were amplified from pMK-Ku80-FLFR using Ku80-1000-1/-2, Ku80-750-1/-2, Ku80-500-1/-2, Ku80-250-1/-2, Ku80-100-1/-2, and Ku80-50-1/-2, respectively. Similarly, donor fragments with 1000, 750, 500, 250, 100, and 50 bp homology arms for Lig4 were amplified from pMK-Lig4-FLFR using the primer sets Lig4-1000-1/-2, Lig4-750-1/-2, Lig4-500-1/-2, Lig4-250-1/-2, Lig4-100-1/-2, or Lig4-50-1/-2, respectively. Donor fragments with 1000, 750, 500, 250, 100, and 50 bp homology arms for ABHL were amplified from pMK-ABHL-FLFR using the primer sets of ABHL-1000-1/-2, ABHL-750-1/-2, ABHL − 500-1/-2, ABHL-250-1/-2, ABHL-100-1/-2, and ABHL-50-1/-2, respectively.

For the construction of the donor vector of the single crossover-mediated Ku80 base editing, the Ku80 gene region comprising point mutations was generated by fusion PCR. For the first PCR, the Ku80 gene regions were amplified from the genome of Fol using each primer set of SKu80-1/-2 or SKu80-3/-4. The PCR products obtained from the first PCR were mixed and fused by the second PCR using the SKu80-1/-4 primer set. The Ku80 gene region with point mutations obtained by fusion PCR was inserted between the HindIII and SpeI sites of pMK-dGFP, which produced in pMK-SKu80.

For the construction of the donor vector of the single crossover-mediated Ku80 gene tagging, GFP-fused Ku80 gene was generated by fusion PCR. For the first PCR, the Ku80 gene regions with silent mutations, with deleted start and stop codons, were amplified from pMK-SKu80 using SKu80-1/KKu80-2. The amplified Ku80 gene region was inserted between the Hind III and Spe I sites of pMK-dGFP (pMK-KKu80). The GFP gene amplified from pMK412³⁷ using a KK80-3/KK80-4 primer set was cloned between the Spe I and Sac I sites of pMK-KKu80, resulting in pMK-KKu80-GFP.

Protoplasts preparation and transformation of Fusarium species

Protoplasts of F. commune were prepared as previously described⁴⁰. In the case of Fol and Fos, protoplasts were isolated similar to previous reports^37,41 with some modifications. Fol or Fos was cultured in 30 mL of YG liquid medium at 28°C for 1 d at 180 rpm. One milliliter of the culture was transferred into 100 mL fresh YG medium and incubated at 28ºC and 180 rpm overnight. The mycelia were collected by centrifugation at 12,000 rpm for 10 min and washed twice with 1.2 M MgSO₄. In the case of Fol, the mycelia were treated with a mixture of 20 mg/mL Yatalase (Takara bio, Japan), 20 mg/mL lysing enzyme (Sigma, USA), and 20 mg/mL cellulase (Yakult Pharmaceutical Industry, Japan) in 1.2 M MgSO₄ for 3–4 h. In the case of Fos, the mycelia were treated with a mixture of 40 mg/mL Yatalase, 40 mg/mL Driserase (ASKA Animal Health, Japan), 40 mg/mL lysing enzyme (Sigma), and 40 mg/mL cellulase in 1.2 M MgSO₄ for 16 h. The fungal protoplasts were collected and washed twice with STC (1.2 M sorbitol, 50 mM CaCl₂, and 10 mM Tris–HCl pH 7.5). Then, the protoplasts were diluted to a concentration of 5×10⁶/mL with STC buffer.

About 2.5 µg each of CRISPR/Cas9 and donor vectors were mixed and added to 50 µL of the protoplast suspension. In the case of the donor DNA fragments, approximately 1 µg of CRISPR/Cas9 vector and 500 ng of the donor DNA fragments were mixed and added to 50 µL protoplast suspension. For the disruption of SIX1 and W5-fgm4, 15 µg of each donor vector and CRISPR/Cas9 vector were mixed and added to 150 µL of the protoplast suspensions. The transformants were selected and maintained on YG solid medium containing hygromycin B (100 µg/mL). The primers used for the PCR analysis to check the disrupted mutants are listed in Table S1. To check the SIX1 and W5-fgm4 disruptions, the primer sets of SIX1_P1/P4 and fgm4_P1/P4 were used, respectively. To check the sequences obtained by single crossover-mediated genome editing, a Ku80-check-1/Ku80-seq-2 primer set was used for the PCR, and Ku80-seq-2 was also used for the sequencing analysis.

ACKNOWLEDGMENTS

We gratefully thank Dr. Shuta Asai (RIKEN, The Institute of Physical and Chemical Research) for providing Fos isolate Spin2SA. This work was supported in part by the Japan Society for the promotion of Science (JSPS) Grant-in-Aid for Scientific Research (A) (Grant number 19H00939), Grant-in-Aid for JSPS Research Fellows (Grant number 20J13846), Grant-in-Aid for Young Scientists (A) (Grant number 17H05021), and Grant-in-Aid for Challenging Exploratory Research (Grant number 18K19218).

Data Availability

The datasets generated and/or analysed during the current study are available in the NCBI (https://www.ncbi.nlm.nih.gov) under the following accession numbers: Ku80, FOXG_02215; Ku70, FOXG_06386; Lig4, FOXG_11480; ABHL,FOXG_14298; SIX1, FOXG_16418; W5 fgm4, LC708252; Fos genome, GCA_013347345.1. All data generated or analyzed during this study are available from the corresponding author upon reasonable request.

Author Contributions

TA.A., TS.A., and T.K designed the experiments and oversaw the study. TA.A and H.S. wrote the manuscript. S.S., H.S., S.K., M.Y., TA.A. carried out experimental work and data analysis.

Competing Interests

The authors declare no competing interests.

Arie, T. Fusarium diseases of cultivated plants, control, diagnosis, and molecular and genetic studies. J. Pestic. Sci. 44, 275–281 (2019).
Edel-Hermann, V. & Lecomte, C. Current status of Fusarium oxysporum formae specials and races. Phytopathology 109, 512–530 (2019).
Yang, H., Yu, H., & Ma, L.-J. Accessory chromosomes in Fusarium oxysporum. Phytopathology 110, 1488–1496 (2020).
Ma, L.-J. et al. Comparative genomics reveals mobile pathogenicity chromosomes in Fusarium. Nature 464, 367–373 (2010).
Van Dam, P. et al. A mobile pathogenicity chromosome in Fusarium oxysporum for infection of multiple cucurbit species. Sci. Rep. 7, 9042 (2017).
Vlaardingerbroek, I. et al. Dispensable chromosomes in Fusarium oxysporum f. sp. lycopersici. Mol. Plant Pathol. 17, 1455–1466 (2016).
Vlaardingerbroek, I. et al. Exchange of core chromosomes and horizontal transfer of lineage-specific chromosomes in Fusarium oxysporum. Environ. Microbiol. 18, 3702–3713 (2016).
Fuchs, J. G., Moënne-Loccoz, Y., & Défago, G. Nonpathogenic Fusarium oxysporum strain Fo47 induces resistance to Fusarium wilt in tomato. Plant Dis. 81, 492–496 (1997).
Lemanceau P., Bakker P.A.H.M., De Kogel W.J., Alabouvette C., & Schippers B. Antagonistic effect of nonpathogenic Fusarium oxysporum Fo47 and Pseudobactin 358 upon pathogenic Fusarium oxysporum f. sp. dianthi. Appl. Environ. Microbiol. 59, 74–82 (1993).
Benhamou, N., Garand, C., & Goulet, A. Ability of nonpathogenic Fusarium oxysporum strain Fo47 to induce resistance against Pyrhium ultimum infection in cucumber. Appl. Environ. Microbiol. 68, 4044–60 (2002).
Saito, H. et al., Spray application of nonpathogenic Fusaria onto rice flowers controls Bakanae disease (caused by Fusarium fujikuroi) in the next plant generation. Appl. Environ. Microbiol. 87, e01959-20 (2021).
Gasiunas, G., Barrabgou, R., Horvath, P., & Siksnys, V. Cas9-crRNA ribobucleoprotein complex mediates specific DNA cleavage for adaptive immunity in bacteria. Proc. Natl. Acad. Sci. U.S.A. 109, 15539–15540 (2012).
Cong, L. et al. Multiplex genome engineering using CRISPR/Cas systems. Science 339, 819–823 (2013).
Jinek, M. et al. A programmable dual-RNA-Guided DNA endonuclease in adaptive bacterial immunity. Science 337, 816–821 (2012).
Mali, P. et al RNA-guided human genome engineering via Cas9. Science 339, 823–826 (2013).
Mizutani, O. et al. Detailed analysis of targeted gene mutations caused by the platinum-fungal TALENs in Aspergillus oryzae RIB40 strain and a ligD disruptant. J. Biosci. Bioeng. 123, 287–293 (2017).
Arazoe, T. CRISPR-based pathogenic fungal genome editing for control of infection and disease. Prog. Mol. Biol. Transl. Sci. 179, 161–196 (2021).
Yamato, T. et al. Single crossover-mediated targeted nucleotide substitution and knock-in strategies with CRISPR/Cas9 system in the rice blast fungus. Sci. Rep. 9, 7427 (2019).
Schuster, M., & Kahmann, R. CRISPR-Cas9 genome editing approaches in filamentous fungi and oomycetes. Fungal Genet. Biol. 140, 43–53 (2019).
Wang, Q., Cobine, P.A., & Coleman, J.J. Efficient genome editing in Fusarium oxysporum based on CRISPR/Cas9 ribonucleoprotein complexes. Fungal Genet. Biol. 117, 21–29 (2018).
Wang, Q. & Coleman, J.J. CRISPR/Cas9-mediated endogenous gene tagging in Fusarium oxysporum. Fungal Genet. Biol. 126, 17–24 (2019).
Lightfoot, J.D. & Fuller, K.K. CRISPR/Cas9-mediated gene replacement in the fungal keratitis pathogen Fusarium solani var. petroliphilum. Microorganisms 7, 457 (2019).
Ferrara, M., Haidukowski, M., Logrieco, A.F., Leslie, J.F., & Mulè, G. A CRISPR-Cas9 system for genome editing of Fusarium proliferatum. Sci. Rep. 9, 19836 (2019).
Wilson, F.M. & Harrison, R.J. CRISPR/Cas9 mediated editing of the Quorn fungus Fusarium venenatum A3/5 by transient expression of Cas9 and sgRNAs targeting endogenous marker gene PKS12. Fungal Biol Biotechnol. 8, 15 (2019).
Gardiner, D.M. & Kazan, K. Selection is required for efficient Cas9-mediated genome editing in Fusarium graminearum. Fungal Biol. 122, 131–137 (2018).
Arazoe, T. et al. Tailor-made CRISPR/Cas system for highly efficient targeted gene replacement in the rice blast fungus. Biotechnol. Bioeng. 112, 2543–2549 (2015).
Ninomiya, Y., Suzuki, K., Ishii, C., & Inoue, H. Highly efficient gene replacements in Neurospora strains deficient for nonhomologous end-joining. Proc. Natl. Acad. Sci. U.S.A. 101, 12248–12253 (2004).
Kito, H. et al. MgLig4, a homolog of Neurospora crassa Mus-53 (DNA ligase IV), is involved in, but not essential for, non-homologous end-joining events in Magnaporthe grisea. Fungal Genet. Biol. 45, 1543–1551 (2008).
Leisen, T. et al. CRISPR/Cas with ribboneoprotein complexes and transiently selected telomere vectors allows highly efficient marker-free and multiple genome editing in Botrytis cinerea. PLoS Pathog. 16, e1008326 (2020).
Jia L-J. et al. A linear nonribosomal octapeptide from Fusarium graminearum facilitates cell-to-cell invasion of wheat. Nat. Commun. 10, 922 (2019).
Vlaardingerbroek, I., Beerens, B., Schmidt, S. M., Cornelissen, B. J. & Rep, M. Dispensable chromosomes in Fusarium oxysporum f. sp. lycopersici. Mol. Plant Pathol. 17, 1455–1466 (2016).
Li, J., Fokkens, L., Conneely, L.J. & Rep, M., Partial pathogenicity chromosomes in Fusarium oxysporum are sufficient to cause disease and can be horizontally transferred. Environ. Microbiol. 22, 4985–5004 (2020).
Ayukawa, Y. et al. A pair of effectors encoded on a conditionally dispensable chromosome of Fusarium oxysporum suppress host-specific immunity. Commun. Biol. 4, 707 (2021).
Andrew, V. et al. Search-and-replace genome editing without double-strand breaks or donor DNA. Nature 576, 149–157 (2019).
Collias, D. & Beisel, C.L. CRISPR technologies and the search for the PAM-free nuclease. Nat. Commun. 12, 555 (2021).
Adli, M. The CRISPR tool kit for genome editing and beyond. Nat. Commun. 9, 1911 (2018).
Arazoe, T., Ohsato, S., Arie, T., Yoneyama, K., & Kuwata, S. Construction of a system for exploring mitotic homologous recombination in the genome of Pyricularia oryzae. J. Gen. Plant Pathol. 79, 422–430 (2013).
Arazoe, T. et al. Site-specific DNA double-strand break generated by I-SceI endonuclease enhances ectopic homologous recombination in Pyricularia oryzae. FEMS Microbiol. Lett. 352, 221–229 (2014).
Arazoe, T. et al., Tailor-made TALEN system for highly efficient targeted gene replacement in the rice blast fungus. Biotechnol. Bioeng. 112, 1335–1342 (2014).
Kashiwa, T. et al., An avirulence gene homologue in the tomato wilt fungus Fusarium oxysporum f. sp. lycopersici race 1 functions as a virulence gene in the cabbage yellows fungus F. oxysporum f. sp. conglutinans. J. Gen. Plant Pathol. 79, 412–421 (2013).
Kawabe, M. et al. Cloning of the pathogenicity-related gene FPD1 in Fusarium oxysporum f. sp. lycopersici. J. Gen. Plant Pathol. 70, 16–20 (2004).
Staben, C. et al. Use of a bacterial hygromycin B resistance gene as a dominant selectable marker in Neurospora crassa transformation. Fungal Genet. Newslett. 70, 79–81 (1989).

No competing interests reported.

Download PDF

Editorial decision: Major revision
07 Jul, 2022
Reviews received at journal
02 Jul, 2022
Reviewers agreed at journal
01 Jul, 2022
Reviewers agreed at journal
29 Jun, 2022
Reviewers agreed at journal
29 Jun, 2022
Reviewers invited by journal
27 Jun, 2022
Editor assigned by journal
24 Jun, 2022
Editor invited by journal
16 May, 2022
Submission checks completed at journal
16 May, 2022
First submitted to journal
25 Apr, 2022

You are reading this latest preprint version

Genome editing using a versatile vector-based CRISPR/Cas9 system in Fusarium species

Status:

Version 1

Abstract

Figures

Introduction

Results

Development of optimized CRISPR/Cas9 vector and HR-mediated targeted gene knock-out

Single crossover-mediated targeted base editing and endogenous gene tagging

Discussion

Methods

Fungal isolates, growth conditions, and DNA analysis

Optimization and construction of CRISPR/Cas9 vectors

Construction of donor vectors and DNA fragments

Declarations

References

Additional Declarations

Supplementary Files

Status:

Version 1