Z. Zhang, X. Duan, B. Qiu, Z. Yang, D. Cai, P. He, D.Jia, Y. Zhou, Preparation and anisotropic properties of textured structural ceramics: A review, Journal of Advanced Ceramics 8 (2019) 289-332.
 R. Riedle, A. Kienzle, W. Dressler, L. Ruwisch, J. Bill, F. Aldinger, A silicoboron carbonitride ceramic stable to 2000 °C, Nature 382 (1996) 796-798.
 R. Riedle, L.M. Ruswisch, L. An, R. Raj, Amorphous silicoboron carbonitride ceramic with very high viscosity at temperatures above 1500oC, Journal of the American Ceramic Society 81 (2005) 3341-3344.
 N.V.R. Kumar, S. Prinz, C. Ye, A. Zimmermann, F. Aldinger, F. Berger, K. Müller, Crystallization and creep behavior of Si–B–C–N ceramics, Acta Materialia 53 (2005) 4567-4578.
 N. Liao, D. Jia, Z. Yang, Y. Zhou, Y. Li, Enhanced thermal shock and oxidation resistance of Si2BC3N ceramics through MWCNTs incorporation. Journal of Advanced Ceramics 7 (2018) 276-288.
 N. Liao, D. Jia, Z. Yang, Y. Zhou, Enhanced mechanical properties and thermal shock resistance of Si2BC3N ceramics with SiC coated MWCNTs. Journal of Advanced Ceramics 8 (2019) 121-132.
 J. Wang, Z. Yang, X. Duan, D. Jia, Y. Zhou, Microstructure and mechanical properties of SiCf/SiBCN ceramic matrix composites. Journal of Advanced Ceramics 4 (2015) 31-38.
 T.G. Babu, R. Devasia, Simple and low-cost synthetic route for SiBCN ceramic powder from a boron modified cyclotrisilazane, Journal of the American Ceramic Society 102 (2019) 476-489.
 C. Song, X. Liu, F. Ye, Y. Liu, L. Cheng, Mechanical and dielectric properties of SiCf/BN/SiBCN composites via different synthesis technologies, Journal of the European Ceramic Society 39 (2019) 4417-4423.
 D. Jia, B. Liang, Z. Yang, Z. Yu, Metastable Si-B-C-N ceramics and their matrix composites developed by inorganic route based on mechanical alloying: Fabrication, microstructures, properties and their relevant basic scientific issues, Progress in Materials Science 98 (2018) 1-67.
 D. Li, Q. Li, J. Yuan, Z. Yang, D. Jia, D. Cai, S. Wang, Y. Zhou, D. Yu, Y. Tian, Effects of high pressure on the low-temperature sintering of dense amorphous SiBCN monoliths, Journal of the European Ceramic Society 38 (2018) 3777-3786.
 P. Zhang, D. Jia, Z. Yang, X. Duan, Y. Zhou, Progress of a novel non-oxide Si-B-C-N ceramic and its matrix composites, Journal of Advanced Ceramics 1 (2012) 157-178.
 J. Wang, X. Duan, Z. Yang, D. Jia, Y. Zhou, Ablation mechanism and properties of SiCf/SiBCN ceramic composites under an oxyacetylene torch environment, Corrosion Science 82 (2014) 101-107.
 D. Li, Z. Yang, D. Jia, X. Duan, P. He, Y. Zhou, Ablation behavior of graphene reinforced SiBCN ceramics in an oxyacetylene combustion flame, Corrosion Science 100 (2015) 85-100.
 N. Liao, D. Jia, Z.H. Yang, B. Niu, Y. Zhou, Y. Li, Enhanced mechanical properties, thermal shock resistance and ablation resistance of Si2BC3N ceramics with nano ZrB2 addition, Journal of the European Ceramic Society 39 (2019) 846-859.
 B. Feng, Y. Zhang, B. Li, Medium-temperature sintering efficiency of ZrB2 ceramics using polymer-derived SiBCN as a sintering aid, Journal of the European Ceramic Society 102 (2019) 855-866.
 B. Wang, Z. Yang, D. Li, D. Cai, B. Niu, J. Guan, D. Jia, Y. Zhou, Effects of TaC addition on microstructure and mechanical properties of SiBCN composite ceramics, Ceramics International. 45 (2019) 22138-22147..
 M. Sun, R. Fu, J. Chen, Fabrication and microstructures of functional gradient SiBCN-Nb composite by hot pressing, Materials Characterization 114 (2019) 115-121.
 B. Feng, Y. Zhang, B. Li, S. Hu, Medium-temperature sintering efficiency of ZrB2 ceramics using polymer-derived SiBCN as a sintering aid, Journal of the American Ceramic Society. 102 (2019) 855–866.
 S. Wang, Y. Zhang, S. Yong, X. Yao, Y. Ming, Synthesis and characteristic of SiBCN/HfN ceramics with high temperature oxidation resistance, Journal of Alloys and Compounds. 685 (2016) 828–835.
 B. Liang, Z. Yang, D. Jia, S. Guo, Q. Zhu, X. Liao, Y. Miao, Q. Zhang, Y. Zhou, Densification, microstructural evolution and mechanical properties of Si-B-C-N monoliths with LaB6 addition, Journal of Alloys and Compounds 696 (2017) 1090-1095.
 B. Liang, Z. Yang, Y. Miao, Q. Zhu, X. Liao, Q. Li, Z. Tian, D. Jia, Y. Zhou, Si-B-C-N monoliths with LaB6-induced well-developed BN(C) flakes, Materials Letters 187 (2017) 36-39.
 B. Liang, Z. Yang, Y. Miao, Q. Li, Q. Zhu, X. Liao, D. Jia, Y. Zhou, Microstructural evolution, mechanical and thermal properties of LaB6 embedded in Si-B-C-N prepared by spark plasma sintering, Ceramics International. 43 (2017) 4814-4820.
 Y. Miao, Z. Yang, B. Liang, Q. Li, Q. Chen, D. Jia, Y.B. Cheng, Y. Zhou, A novel in situ synthesis of SiBCN-Zr composites prepared by a sol-gel process and spark plasma sintering, Dalton Transactions. 45 (2016) 12739-12744.
 Y. Miao, Z. Yang, J. Rao, X. Duan, P. He, D. Jia, Y. Cheng, Y. Zhou, Influence of sol-gel derived ZrB2 additions on microstructure and mechanical properties of SiBCN composites, Ceramics International. 43 (2017) 4372-4378.
 Y. Miao, Z. Yang, Q. Zhu, B. Liang, L. Quan, T. Zhuo, D. Jia, Y.B. Cheng, Z. Yu, Thermal ablation behavior of SiBCN-Zr composites prepared by reactive spark plasma sintering, Ceramics International. 43 (2017) 7978-7983.
 Agte C, Alterthum H, Investigations of the High-Melting Carbide Systems Connected with Problem of the Carbon Melting, Z. Techn. Phys. 11 (1930) 182.
 Andrievskii R A, Strel'Nikova N S, Poltoratskii N I, Melting point in systems ZrC-HfC, TaC-ZrC, TaC-HfC, Soviet Powder Metallurgy & Metal Ceramics. 6 (1967) 65-67.
 E. P. Simonenko, N. A. Ignatov, N. P. Simonenko, Yu. S. Ezhov, V. G. Sevastyanov, N. T. Kuznetsov, Zirconium Carbide Ta4ZrC5 and Tantalum–Hafnium Carbide Ta4HfC5 via Sol–Gel Technology, Synthesis and Properties of Inorganic Compounds. 56 (2011) 1763-1769.
 Y. Lu, Y. Sun, T. Zhang, F. Chen, L. Ye, T. Zhao, Polymer-derived Ta4 HfC5 nanoscale ultrahigh-temperature ceramics: Synthesis, microstructure and properties, Journal of the European Ceramic Society. 39 (2019) 205-211.
 Osama Gaballa, B.A. Cook, A.M. Russell, Reduced-temperature processing and consolidation of ultra-refractory Ta4HfC5, Int. Journal of Refractory Metals and Hard Materials. 41 (2013) 293-299
 N. Liao, D. Jia, Z. Yang, Y. Zhou, Y. Li, X. Jia, Strengthening and toughening effects of MWCNTs on Si2BC3N ceramics sintered by SPS technique, Materials Science and Engineering A. 710 (2018) 142-150.
 N. Liao, D. Jia, Z. Yang, Z. Yu, Y. Li, Mechanical properties and thermal shock resistance of Si2BC3N ceramics with ternary Al4SiC4 additive, Ceramics International. 44 (2018) 9009-9017.
 H. Chen, B. Tang, C. Zhong, Y. Yuan, Y. Tan, S. Zhang, The dielectric constant and quality factor calculation of the microwave dielectric ceramic solid solutions, Ceramics International. 43(2017) 7383-7386.
 Q. Hang, Z. Xing, X. Zhu, M. Yu, Y. Song, J. Zhu, Z. Liu, Dielectric properties and related ferroelectric domain configurations in multiferroic BiFeO3-BaTiO3 solid solutions, Ceramics International. 38 (2012) S411-S414.
 E. Antolini, Li2O evaporation from LixCo1-xO solid solutions at 1200 degrees C, Ceramics International. 27 (2001) 675-679.
 K. Zaara, M. Cheinggui, V. Optasanu, M. Khitouni, Solid solution evolution during mechanical alloying in Cu-Nb-Al compounds, International Journal of Minerals Metallurgy and Materials. 26 (2019) 1129-1139.
 D. Li, Z. Yang, D. Jia, S. Wang, X. Duan, B. Liang, Q. Zhu, Y. Zhou, Structure evolution, amorphization and nucleation studies of carbon-lean to -rich SiBCN powder blends prepared by mechanical alloying, RSC Advance 6 (2016) 48255-48271.