[1] R. Riedle, A. Kienzle, W. Dressler, L. Ruwisch, J. Bill, F. Aldinger, A Silicoboron Carbonitride Ceramic Stable to 2000 °C, Nature 382 (1996) 796-798.
[2] R. Riedle, L.M. Ruswisch, L. An, R. Raj, Amorphous silicoboron carbonitride ceramic with very high viscosity at temperatures above 1500oC, Journal of the American Ceramic Society 81 (2005) 3341-3344.
[3] N.V.R. Kumar, S. Prinz, C. Ye, A. Zimmermann, F. Aldinger, F. Berger, K. Müller, Crystallization and creep behavior of Si–B–C–N ceramics, Acta Materialia 53 (2005) 4567-4578.
[4] T.G. Babu, R. Devasia, Simple and low-cost synthetic route for SiBCN ceramic powder from a boron modified cyclotrisilazane, Journal of the American Ceramic Society 102 (2019) 476-489.
[5] C. Song, X. Liu, F. Ye, Y. Liu, L. Cheng, Mechanical and dielectric properties of SiCf/BN/SiBCN composites via different synthesis technologies, Journal of the European Ceramic Society 39 (2019) 4417-4423.
[6] D. Jia, B. Liang, Z. Yang, Z. Yu, Metastable Si-B-C-N ceramics and their matrix composites developed by inorganic route based on mechanical alloying: Fabrication, microstructures, properties and their relevant basic scientific issues, Progress in Materials Science 98 (2018) 1-67.
[7] D. Li, Q. Li, J. Yuan, Z. Yang, D. Jia, D. Cai, S. Wang, Y. Zhou, D. Yu, Y. Tian, Effects of high pressure on the low-temperature sintering of dense amorphous SiBCN monoliths, Journal of the European Ceramic Society 38 (2018) 3777-3786.
[8] P. Zhang, D. Jia, Z. Yang, X. Duan, Y. Zhou, Progress of a novel non-oxide Si-B-C-N ceramic and its matrix composites, Journal of Advanced Ceramics 1 (2012) 157-178.
[9] J. Wang, X. Duan, Z. Yang, D. Jia, Y. Zhou, Ablation mechanism and properties of SiCf/SiBCN ceramic composites under an oxyacetylene torch environment, Corrosion Science 82 (2014) 101-107.
[10] D. Li, Z. Yang, D. Jia, X. Duan, P. He, Y. Zhou, Ablation behavior of graphene reinforced SiBCN ceramics in an oxyacetylene combustion flame, Corrosion Science 100 (2015) 85-100.
[11] N. Liao, D. Jia, Z.H. Yang, B. Niu, Y. Zhou, Y. Li, Enhanced mechanical properties, thermal shock resistance and ablation resistance of Si2BC3N ceramics with nano ZrB2 addition, Journal of the European Ceramic Society 39 (2019) 846-859.
[12] B. Feng, Y. Zhang, B. Li, Medium-temperature sintering efficiency of ZrB2 ceramics using polymer-derived SiBCN as a sintering aid, Journal of the European Ceramic Society 102 (2019) 855-866.
[13] S. Wang, Y. Zhang, Y. Sun, Synthesis and characteristic of SiBCN/HfN ceramics with high temperature oxidation resistance, Journal of Alloys and Compounds 685 (2016) 828-835.
[14] M. Sun, R. Fu, J. Chen, Fabrication and microstructures of functional gradient SiBCN-Nb composite by hot pressing, Materials Characterization 114 (2019) 115-121.
[15] B. Liang, Z. Yang, D. Jia, S. Guo, Q. Zhu, X. Liao, Y. Miao, Q. Zhang, Y. Zhou, Densification, microstructural evolution and mechanical properties of Si-B-C-N monoliths with LaB6 addition, Journal of Alloys and Compounds 696 (2017) 1090-1095.
[16] B. Liang, Z. Yang, Y. Miao, Q. Zhu, X. Liao, Q. Li, Z. Tian, D. Jia, Y. Zhou, Si-B-C-N monoliths with LaB6-induced well-developed BN(C) flakes, Materials Letters 187 (2017) 36-39.
[17] B. Liang, Z. Yang, Y. Miao, Q. Li, Q. Zhu, X. Liao, D. Jia, Y. Zhou, Microstructural evolution, mechanical and thermal properties of LaB6 embedded in Si-B-C-N prepared by spark plasma sintering, Ceramics International. 43 (2017) 4814-4820.
[18] Y. Miao, Z. Yang, B. Liang, Q. Li, Q. Chen, D. Jia, Y.B. Cheng, Y. Zhou, A novel in situ synthesis of SiBCN-Zr composites prepared by a sol-gel process and spark plasma sintering, Dalton Transactions. 45 (2016) 12739-12744.
[19] Y. Miao, Z. Yang, J. Rao, X. Duan, P. He, D. Jia, Y. Cheng, Y. Zhou, Influence of sol-gel derived ZrB2 additions on microstructure and mechanical properties of SiBCN composites, Ceramics International. 43 (2017) 4372-4378.
[20] Y. Miao, Z. Yang, Q. Zhu, B. Liang, L. Quan, T. Zhuo, D. Jia, Y.B. Cheng, Z. Yu, Thermal ablation behavior of SiBCN-Zr composites prepared by reactive spark plasma sintering, Ceramics International. 43 (2017) 7978-7983.
[21] B. Feng, Y. Zhang, B. Li, S. Hu, Medium-temperature sintering efficiency of ZrB2 ceramics using polymer-derived SiBCN as a sintering aid, Journal of the American Ceramic Society. 102 (2019) 855–866.
[22] S. Wang, Y. Zhang, S. Yong, X. Yao, Y. Ming, Synthesis and characteristic of SiBCN/HfN ceramics with high temperature oxidation resistance, Journal of Alloys and Compounds. 685 (2016) 828–835.
[23] Agte C, Alterthum H, Investigations of the High-Melting Carbide Systems Connected with Problem of the Carbon Melting, Z. Techn. Phys. 11 (1930) 182.
[24] Andrievskii R A, Strel'Nikova N S, Poltoratskii N I, Melting point in systems ZrC-HfC, TaC-ZrC, TaC-HfC, Soviet Powder Metallurgy & Metal Ceramics. 6 (1967) 65-67.
[25] E. P. Simonenko, N. A. Ignatov, N. P. Simonenko, Yu. S. Ezhov, V. G. Sevastyanov, N. T. Kuznetsov, Zirconium Carbide Ta4ZrC5 and Tantalum–Hafnium Carbide Ta4HfC5 via Sol–Gel Technology, Synthesis and Properties of Inorganic Compounds. 56 (2011) 1763-1769.
[26] Y. Lu, Y. Sun, T. Zhang, F. Chen, L. Ye, T. Zhao, Polymer-derived Ta4 HfC5 nanoscale ultrahigh-temperature ceramics: Synthesis, microstructure and properties, Journal of the European Ceramic Society. 39 (2019) 205-211.
[27] Osama Gaballa, B.A. Cook, A.M. Russell, Reduced-temperature processing and consolidation of ultra-refractory Ta4HfC5, Int. Journal of Refractory Metals and Hard Materials. 41 (2013) 293-299
[28] N. Liao, D. Jia, Z. Yang, Y. Zhou, Y. Li, X. Jia, Strengthening and toughening effects of MWCNTs on Si2BC3N ceramics sintered by SPS technique, Materials Science and Engineering A. 710 (2018) 142-150.
[29] N. Liao, D. Jia, Z. Yang, Z. Yu, Y. Li, Mechanical properties and thermal shock resistance of Si2BC3N ceramics with ternary Al4SiC4 additive, Ceramics International. 44 (2018) 9009-9017.
[30] K. Pierre M, D Simon, M Maaza, C. Liu, R. Mohamed M, R. Diaa A, M. Bonex W, Strain and grain size of TiO2 nanoparticles from TEM, Raman spectroscopy and XRD: The revisiting of the Williamson-Hall plot method, Results in Physics. 9 (2018) 628-635.
[31] H. Chen, B. Tang, C. Zhong, Y. Yuan, Y. Tan, S. Zhang, The dielectric constant and quality factor calculation of the microwave dielectric ceramic solid solutions, Ceramics International. 43(2017) 7383-7386.
[32] Q. Hang, Z. Xing, X. Zhu, M. Yu, Y. Song, J. Zhu, Z. Liu, Dielectric properties and related ferroelectric domain configurations in multiferroic BiFeO3-BaTiO3 solid solutions, Ceramics International. 38 (2012) S411-S414.
[33] E. Antolini, Li2O evaporation from LixCo1-xO solid solutions at 1200 degrees C, Ceramics International. 27 (2001) 675-679.
[34] K. Zaara, M. Cheinggui, V. Optasanu, M. Khitouni, Solid solution evolution during mechanical alloying in Cu-Nb-Al compounds, International Journal of Minerals Metallurgy and Materials. 26 (2019) 1129-1139.
[35] D. Li, Z. Yang, D. Jia, S. Wang, X. Duan, B. Liang, Q. Zhu, Y. Zhou, Structure evolution, amorphization and nucleation studies of carbon-lean to -rich SiBCN powder blends prepared by mechanical alloying, RSC Advance 6 (2016) 48255-48271.