[1] X. Zhang, Essential scientific mapping of the value chain of thermochemically converted second-generation bio-fuels, Green Chem. 18 (2016). doi:10.1039/c6gc02335e.
[2] L. Garcia, R. French, S. Czernik, E. Chornet, Catalytic steam reforming of bio-oils for the production of hydrogen: effects of catalyst composition, Appl. Catal. A Gen. 201 (2000) 225–239. doi:http://dx.doi.org/10.1016/S0926-860X(00)00440-3.
[3] A. CORMA, G. HUBER, L. SAUVANAUD, P. OCONNOR, Processing biomass-derived oxygenates in the oil refinery: Catalytic cracking (FCC) reaction pathways and role of catalyst, J. Catal. 247 (2007) 307–327. doi:10.1016/j.jcat.2007.01.023.
[4] M. Pozzo, D. Alfè, Hydrogen dissociation and diffusion on transition metal (=Ti, Zr, V, Fe, Ru, Co, Rh, Ni, Pd, Cu, Ag)-doped Mg(0001) surfaces, Int. J. Hydrogen Energy. 34 (2009) 1922–1930. doi:10.1016/j.ijhydene.2008.11.109.
[5] J. Zhang, X. Zhang, A. Osatiashtiani, A. Bridgwater, Hydrogen donation of bio-acids over transition metal facets: A Density Functional Theory study, Appl. Catal. A Gen. (2019) 117218. doi:10.1016/j.apcata.2019.117218.
[6] K. Müller, K. Brooks, T. Autrey, Hydrogen Storage in Formic Acid: A Comparison of Process Options, Energy & Fuels. 31 (2017) 12603–12611. doi:10.1021/acs.energyfuels.7b02997.
[7] Z. Jiang, P. Qin, T. Fang, Decomposition mechanism of formic acid on Cu (111) surface: A theoretical study, Appl. Surf. Sci. 396 (2017) 857–864. doi:10.1016/j.apsusc.2016.11.042.
[8] C. Hu, S.-W. Ting, K.-Y. Chan, W. Huang, Reaction pathways derived from DFT for understanding catalytic decomposition of formic acid into hydrogen on noble metals, Int. J. Hydrogen Energy. 37 (2012) 15956–15965. doi:10.1016/j.ijhydene.2012.08.035.
[9] Y. Huang, X. Dong, Y. Yu, M. Zhang, Comparative Kinetic Monte Carlo Study of Acetic Acid Decomposition to Surface Carbon Species and Undesirable Byproducts on Pd(100) and Pd/Au(100) from Density Functional Theory-Based Calculations, J. Phys. Chem. C. 121 (2017) 26733–26741. doi:10.1021/acs.jpcc.7b05072.
[10] X. Li, S. Wang, Y. Zhu, G. Yang, P. Zheng, DFT study of bio-oil decomposition mechanism on a Co stepped surface: Acetic acid as a model compound, Int. J. Hydrogen Energy. 40 (2015) 330–339. doi:10.1016/j.ijhydene.2014.11.004.
[11] K.I. Gursahani, R. Alcalá, R.D. Cortright, J.A. Dumesic, Reaction kinetics measurements and analysis of reaction pathways for conversions of acetic acid, ethanol, and ethyl acetate over silica-supported Pt, Appl. Catal. A Gen. 222 (2001) 369–392. doi:10.1016/S0926-860X(01)00844-4.
[12] R. Alcala, J.W. Shabaker, G.W. Huber, M.A. Sanchez-Castillo, J.A. Dumesic, Experimental and DFT Studies of the Conversion of Ethanol and Acetic Acid on PtSn-Based Catalysts †, J. Phys. Chem. B. 109 (2005) 2074–2085. doi:10.1021/jp049354t.
[13] M.H. Brijaldo, H.A. Rojas, J.J. Martínez, F.B. Passos, Effect of support on acetic acid decomposition over palladium catalysts, J. Catal. 331 (2015) 63–75. doi:10.1016/j.jcat.2015.08.019.
[14] A. Neitzel, Y. Lykhach, V. Joha, N. Tsud, K.C. Prince, J. Libuda, Decomposition of Acetic Acid on Model Pt / CeO 2 Catalysts : The Effect of Surface Crowding, J. Phys. Chem. C. 119 (2015) 13721–13734. doi:10.1021/acs.jpcc.5b03079.
[15] S.M. Lang, T.M. Bernhardt, Decomposition of acetic acid mediated by free Mn x O x + ( x = 3 , 4 ) clusters, Int. J. Mass Spectrom. 433 (2018) 7–10. doi:10.1016/j.ijms.2018.07.008.
[16] H. Yan, X. Feng, Y. Liu, C. Yang, H. Shan, Catalytic cracking of acetic acid and its ketene intermediate over HZSM-5 catalyst : A density functional theory study, Mol. Catal. 437 (2017) 11–17. doi:10.1016/j.mcat.2017.04.038.
[17] M.D. Esrafili, P. Nematollahi, R. Nurazar, A density functional theory study on adsorption and decomposition of acetic acid over silicon carbide nanotubes, Synth. Met. 215 (2016) 164–169. doi:10.1016/j.synthmet.2016.02.019.
[18] F. Sanchez, M.H. Alotaibi, D. Motta, C.E. Chan-Thaw, A. Rakotomahevitra, T. Tabanelli, A. Roldan, C. Hammond, Q. He, T. Davies, A. Villa, N. Dimitratos, Hydrogen production from formic acid decomposition in the liquid phase using Pd nanoparticles supported on CNFs with different surface properties, Sustain. Energy Fuels. 2 (2018) 2705–2716. doi:10.1039/C8SE00338F.
[19] D.S. Su, S. Perathoner, G. Centi, Nanocarbons for the Development of Advanced Catalysts, Chem. Rev. 113 (2013) 5782–5816. doi:10.1021/cr300367d.
[20] M.F.L. De Volder, S.H. Tawfick, R.H. Baughman, A.J. Hart, Carbon Nanotubes: Present and Future Commercial Applications, Science (80-. ). 339 (2013) 535–539. doi:10.1126/science.1222453.
[21] J.M. Planeix, N. Coustel, B. Coq, V. Brotons, P.S. Kumbhar, R. Dutartre, P. Geneste, P. Bernier, P.M. Ajayan, Application of Carbon Nanotubes as Supports in Heterogeneous Catalysis, J. Am. Chem. Soc. 116 (1994) 7935–7936. doi:10.1021/ja00096a076.
[22] F.R. García-García, J. Álvarez-Rodríguez, I. Rodríguez-Ramos, A. Guerrero-Ruiz, The use of carbon nanotubes with and without nitrogen doping as support for ruthenium catalysts in the ammonia decomposition reaction, Carbon N. Y. 48 (2010) 267–276. doi:10.1016/j.carbon.2009.09.015.
[23] H. Miao, S. Li, Z. Wang, S. Sun, M. Kuang, Z. Liu, J. Yuan, Enhancing the pyridinic N content of Nitrogen-doped graphene and improving its catalytic activity for oxygen reduction reaction, Int. J. Hydrogen Energy. 42 (2017) 28298–28308. doi:10.1016/j.ijhydene.2017.09.138.
[24] H. Wang, T. Maiyalagan, X. Wang, Review on Recent Progress in Nitrogen-Doped Graphene: Synthesis, Characterization, and Its Potential Applications, ACS Catal. 2 (2012) 781–794. doi:10.1021/cs200652y.
[25] X. Liu, W. Jia, G. Xu, Y. Zhang, Y. Fu, Selective Hydrodeoxygenation of Lignin-Derived Phenols to Cyclohexanols over Co-Based Catalysts, ACS Sustain. Chem. Eng. 5 (2017) 8594–8601. doi:10.1021/acssuschemeng.7b01047.
[26] S. Van Dommele, Nitrogen Doped Carbon Nanotubes: Synthesis, Characterization and Catalysis, Utrecht University, 2008.
[27] W. Xia, Interactions between metal species and nitrogen-functionalized carbon nanotubes, Catal. Sci. Technol. 6 (2016) 630–644. doi:10.1039/C5CY01694K.
[28] B. Rahzani, M. Saidi, H.R. Rahimpour, B.C. Gates, M.R. Rahimpour, Experimental investigation of upgrading of lignin-derived bio-oil component anisole catalyzed by carbon nanotube-supported molybdenum, RSC Adv. 7 (2017) 10545–10556. doi:10.1039/C6RA26121C.
[29] C. Zhou, W. Deng, X. Wan, Q. Zhang, Y. Yang, Y. Wang, Functionalized Carbon Nanotubes for Biomass Conversion: The Base-Free Aerobic Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid over Platinum Supported on a Carbon Nanotube Catalyst, ChemCatChem. 7 (2015) 2853–2863. doi:10.1002/cctc.201500352.
[30] Y. Liu, Z. Chen, X. Wang, Y. Liang, X. Yang, Z. Wang, Highly Selective and Efficient Rearrangement of Biomass-Derived Furfural to Cyclopentanone over Interface-Active Ru/Carbon Nanotubes Catalyst in Water, ACS Sustain. Chem. Eng. 5 (2017) 744–751. doi:10.1021/acssuschemeng.6b02080.
[31] T.-Y. Ding, Z.-G. Zhao, M.-F. Ran, Y.-Y. Yang, Superior activity of Pd nanoparticles confined in carbon nanotubes for hydrogen production from formic acid decomposition at ambient temperature, J. Colloid Interface Sci. 538 (2019) 474–480. doi:10.1016/j.jcis.2018.12.017.
[32] M.R. Nabid, Y. Bide, B. Etemadi, Ag@Pd nanoparticles immobilized on a nitrogen-doped graphene carbon nanotube aerogel as a superb catalyst for the dehydrogenation of formic acid, New J. Chem. 41 (2017) 10773–10779. doi:10.1039/C7NJ01108C.
[33] Q.Y. Bi, J.D. Lin, Y.M. Liu, H.Y. He, F.Q. Huang, Y. Cao, Dehydrogenation of Formic Acid at Room Temperature: Boosting Palladium Nanoparticle Efficiency by Coupling with Pyridinic-Nitrogen-Doped Carbon, Angew. Chemie - Int. Ed. 55 (2016) 11849–11853. doi:10.1002/anie.201605961.
[34] P. Hirunsit, T. Toyao, S.M.A.H. Siddiki, K. Shimizu, M. Ehara, Origin of Nb 2 O 5 Lewis Acid Catalysis for Activation of Carboxylic Acids in the Presence of a Hard Base, ChemPhysChem. 19 (2018) 2848–2857. doi:10.1002/cphc.201800723.
[35] X. Ning, H. Yu, F. Peng, H. Wang, Pt nanoparticles interacting with graphitic nitrogen of N-doped carbon nanotubes: Effect of electronic properties on activity for aerobic oxidation of glycerol and electro-oxidation of CO, J. Catal. 325 (2015) 136–144. doi:10.1016/j.jcat.2015.02.010.
[36] X. Ning, Y. Li, B. Dong, H. Wang, H. Yu, F. Peng, Y. Yang, Electron transfer dependent catalysis of Pt on N-doped carbon nanotubes: Effects of synthesis method on metal-support interaction, J. Catal. 348 (2017) 100–109. doi:10.1016/j.jcat.2017.02.011.
[37] Y.X. Li, M. Bowker, Acetic Acid on Rh(110): The Stabilization and Autocatalytic Decomposition of Acetate, J. Catal. 142 (1993) 630–640. doi:10.1006/jcat.1993.1236.
[38] X. Li, L. Xue, Y. Zhu, G. Chen, G. Yang, S. Wang, Mechanistic study of bio-oil catalytic steam reforming for hydrogen production: Acetic acid decomposition, Int. J. Hydrogen Energy. 43 (2018) 13212–13224. doi:10.1016/j.ijhydene.2018.05.066.
[39] A.M. Verma, N. Kishore, Decomposition of acetic acid over Ru and Ru/MgO catalyst clusters under DFT framework, Chem. Phys. Lett. 711 (2018) 156–165. doi:10.1016/j.cplett.2018.09.030.
[40] B. Pekmezci Karaman, N. Cakiryilmaz, H. Arbag, N. Oktar, G. Dogu, T. Dogu, Performance comparison of mesoporous alumina supported Cu & Ni based catalysts in acetic acid reforming, Int. J. Hydrogen Energy. 42 (2017) 26257–26269. doi:10.1016/j.ijhydene.2017.08.155.
[41] X. Li, Y. Zhu, G. Chen, G. Yang, Z. Wu, B. Sunden, Theoretical study of solvent effects on the decomposition of formic acid over a Co(111) surface, Int. J. Hydrogen Energy. 42 (2017) 24726–24736. doi:10.1016/j.ijhydene.2017.08.022.
[42] X. Li, K. Xuan, Y. Zhu, G. Chen, G. Yang, A mechanistic study on the decomposition of a model bio-oil compound for hydrogen production over a stepped Ni surface: Formic acid, Appl. Surf. Sci. 452 (2018) 87–95. doi:10.1016/j.apsusc.2018.05.049.
[43] F. Sanchez, D. Motta, A. Roldan, C. Hammond, A. Villa, N. Dimitratos, Hydrogen Generation from Additive-Free Formic Acid Decomposition Under Mild Conditions by Pd/C: Experimental and DFT Studies, Top. Catal. 61 (2018) 254–266. doi:10.1007/s11244-018-0894-5.
[44] B. Delley, An all-electron numerical method for solving the local density functional for polyatomic molecules, J. Chem. Phys. 92 (1990) 508–517. doi:10.1063/1.458452.
[45] M.D. Segall, P.J.D. Lindan, M.J. Probert, C.J. Pickard, P.J. Hasnip, S.J. Clark, M.C. Payne, First-principles simulation: ideas, illustrations and the CASTEP code, J. Phys. Condens. Matter. 14 (2002) 2717–2744. doi:10.1088/0953-8984/14/11/301.
[46] J.P. Perdew, K. Burke, M. Ernzerhof, Generalized Gradient Approximation Made Simple, Phys. Rev. Lett. 77 (1996) 3865–3868. doi:10.1103/PhysRevLett.77.3865.
[47] S. Grimme, Semiempirical GGA-type density functional constructed with a long-range dispersion correction, J. Comput. Chem. 27 (2006) 1787–1799. doi:10.1002/jcc.20495.
[48] K. Lejaeghere, V. Van Speybroeck, G. Van Oost, S. Cottenier, Error Estimates for Solid-State Density-Functional Theory Predictions: An Overview by Means of the Ground-State Elemental Crystals, Crit. Rev. Solid State Mater. Sci. 39 (2014) 1–24. doi:10.1080/10408436.2013.772503.
[49] C.J. Pickard, B. Winkler, R.K. Chen, M.C. Payne, M.H. Lee, J.S. Lin, J.A. White, V. Milman, D. Vanderbilt, Structural Properties of Lanthanide and Actinide Compounds within the Plane Wave Pseudopotential Approach, Phys. Rev. Lett. 85 (2000) 5122–5125. doi:10.1103/PhysRevLett.85.5122.
[50] Y. Liu, L. Huang, D. Wei, Y. Wang, H. Zhang, G. Yu, Synthesis of N-Doped Graphene by Chemical Vapor Deposition and Its Electrical Properties, Nano Lett. 9 (2009) 1752–1758. doi:10.1021/nl803279t.
[51] S. Wang, C. Han, J. Wang, J. Deng, M. Zhu, J. Yao, H. Li, Y. Wang, Controlled Synthesis of Ordered Mesoporous Carbohydrate-Derived Carbons with Flower-like Structure and N-Doping by Self-Transformation, Chem. Mater. 26 (2014) 6872–6877. doi:10.1021/cm503669v.
[52] Y. Cao, S. Mao, M. Li, Y. Chen, Y. Wang, Metal/Porous Carbon Composites for Heterogeneous Catalysis: Old Catalysts with Improved Performance Promoted by N-Doping, ACS Catal. 7 (2017) 8090–8112. doi:10.1021/acscatal.7b02335.
[53] M. Zhao, Y. Xia, J.P. Lewis, R. Zhang, First-principles calculations for nitrogen-containing single-walled carbon nanotubes, J. Appl. Phys. 94 (2003) 2398–2402. doi:10.1063/1.1593798.
[54] T. Schiros, D. Nordlund, L. Pálová, D. Prezzi, L. Zhao, K.S. Kim, U. Wurstbauer, C. Gutiérrez, D. Delongchamp, C. Jaye, D. Fischer, H. Ogasawara, L.G.M. Pettersson, D.R. Reichman, P. Kim, M.S. Hybertsen, A.N. Pasupathy, Connecting Dopant Bond Type with Electronic Structure in N-Doped Graphene, Nano Lett. 12 (2012) 4025–4031. doi:10.1021/nl301409h.
[55] M. Terrones, A. Jorio, M. Endo, A.M. Rao, Y.A. Kim, T. Hayashi, H. Terrones, J.-C. Charlier, G. Dresselhaus, M.S. Dresselhaus, New direction in nanotube science, Mater. Today. 7 (2004) 30–45. doi:10.1016/S1369-7021(04)00447-X.
[56] W.J. Lee, U.N. Maiti, J.M. Lee, J. Lim, T.H. Han, S.O. Kim, Nitrogen-doped carbon nanotubes and graphene composite structures for energy and catalytic applications, Chem. Commun. 50 (2014) 6818. doi:10.1039/c4cc00146j.
[57] Q. Wei, X. Tong, G. Zhang, J. Qiao, Q. Gong, S. Sun, Nitrogen-Doped Carbon Nanotube and Graphene Materials for Oxygen Reduction Reactions, Catalysts. 5 (2015) 1574–1602. doi:10.3390/catal5031574.
[58] X. Ning, Y. Li, J. Ming, Q. Wang, H. Wang, Y. Cao, F. Peng, Y. Yang, H. Yu, Electronic synergism of pyridinic- and graphitic-nitrogen on N-doped carbons for the oxygen reduction reaction, Chem. Sci. 10 (2019) 1589–1596. doi:10.1039/C8SC04596H.