Application of Droplet Digital PCR for the Detection of Vector Copy Number in Clinical CAR/TCR T-Cell Products

doi:10.21203/rs.3.rs-19725/v1

Download PDF

Research

Application of Droplet Digital PCR for the Detection of Vector Copy Number in Clinical CAR/TCR T-Cell Products

https://doi.org/10.21203/rs.3.rs-19725/v1

This work is licensed under a CC BY 4.0 License

Journal Publication

published 08 May, 2020

Read the published version in Journal of Translational Medicine →

You are reading this older preprint version

Read the latest preprint version →

Background : Genetically engineered T cells have become an important therapy for B-cell malignancies. Measuring the efficiency of vector integration into the T cell genome is important for assessing the potency and safety of these cancer immunotherapies.

Methods: A digital droplet polymerase chain reaction (ddPCR) assay was developed and evaluated for assessing the average number of lenti- and retroviral vectors integrated into Chimeric Antigen Receptor (CAR) and T-Cell Receptor (TCR)-engineered T cells.

Results: The ddPCR assay consistently measured the concentration of an empty vector in solution and the average number of CAR and TCR vectors integrated into T cell populations. There was a linear relationship between the average vector copy number per cell measured by ddPCR and the proportion of cells transduced as measured by flow cytometry. Similar vector copy number measurements were obtained by different staff using the ddPCR assay, highlighting the assays reproducibility among technicians. Analysis of fresh and cryopreserved CAR-T and TCR engineered T cells yielded similar results.

Conclusions: ddPCR is a robust tool for accurate quantitation of average vector copy number in CAR and TCR engineered T-cells. The assay is also applicable to other types of genetically engineered cells including Natural Killer cells and hematopoietic stem cells.

Translational Medicine

Droplet Digital PCR

vector copy number

genetically engineered T cells

gene therapy

Chimeric antigen receptor (CAR) T cells

T-Cell Receptor (TCR)-engineered T cells

cellular cancer immunotherapy

Chimeric antigen receptor (CAR) T cells are a novel cellular therapy wherein autologous T cells are harvested from a patient and genetically modified to express chimeric antigen receptors. These receptors are composed of an extracellular scFv designed to bind to a target with high specificity, and an intracellular portion consisting of a costimulatory structure and the T Cell Receptor (TCR) zeta chain which activates T cells [1, 2]. The purpose of these modifications is to generate a T-cell that will, with high specificity, activate and expand in vivo when exposed to a target molecule. A common application of CAR T cells is in treating B cell malignancies which overexpress extracellular markers [1–6]. T cells genetically engineered to express TCRs specific for cancer antigens are also being used for cancer immunotherapy. T cells engineered to express TCRs directed to the cancer/testis antigen NY-ESO-1 TCRs are being used to treat melanoma and synovial cell sarcoma [7]. Recently, TCR engineered T cells directed to Human Papilloma Virus (HPV) 16 E6 oncoprotein have been used treat HPV-associated epithelial cancers [8].

The transgenes coding for CAR and TCR are most often introduced using replication incompetent retroviral or lentiviral vectors, a process which integrates transgenes into the T-cell genome and carries a degree of risk. The number of copies of transgenes that have integrated into the cells’ genome has been associated with the clinical potency of these genetically engineered T cells. It is desirable to attain a high enough average copy number in a given cell population for a product to be effective. However, greater transgene copy numbers are also associated with a higher risk of genotoxicity with higher probability of transgene integration near oncogenes. Subsequently, safety testing of genetically engineered T cell products is paramount with particular attention paid to keeping transgene copy numbers within a safe but effective range.

Droplet digital PCR (ddPCR) has emerged as a recent technology which allows for more precise quantification and analysis of DNA and RNA as compared to older PCR techniques such as real-time PCR[9]. Applications of ddPCR include assessment of gene copy number variation, vector titer and rare event detection [10–12]. It has been used to measure the number of copies of retroviral vectors integrated into induced pluripotent stem (iPS) cells [13] and CD34 + hematopoietic stem cells [14]. It has also been used to assess the number of integrated copies of lentiviral [15] and adenoviral vectors [12].

The primary innovations in ddPCR are the partitioning of samples into thousands of nano-liter sized droplets and the binary evaluation of fluorescence in each of these droplets. Two fluorescent molecules are used in an assay: a reference probe, which binds to a reporter gene present in all cells being assayed, and a vector probe, which binds to the sequence of the vector being evaluated for copy number. Each of the droplets generated in ddPCR serves as an individual chamber for product amplification and they are analyzed individually after the reaction as either positive or negative for the presence of the two fluorescent targeting molecules. The ratio of droplets positive for both the reference and vector probe versus droplets positive for the reference probe is representative of the amount of vector copies present in the overall population. The assumption of the Poisson distribution then allows for calculation of the average number of copies of the vector present in the cell population. Notably this removes the need to generate a standard curve as fluorescence is measured in a binary rather than relative fashion which lends to the precision of ddPCR. Comparisons of the precision in absolute quantitation using ddPCR versus real-time PCR have shown ddPCR to be significantly more precise, with up to a seven fold reduction in variation of measurements [16].

ddPCR also holds value in its ability to accurately detect copy numbers with a wide dynamic range. For example, determining the presence and copy number of oncogenes in a cancer sample can help with diagnosis and treatment. Linear regression analysis was performed on data sets generated by fluorescence in situ hybridization (FISH) and ddPCR for the MET gene copy number in cancer samples with high correlation found between the data produced by the two techniques [17]. Another analysis compared ddPCR with qPCR and Southern blot techniques for the determination of copy number of transgenes in sugar cane with the conclusion that ddPCR had superior accuracy [18]. ddPCR was also used in analyzing transgene copy number in induced pluripotent stem cells for applications in gene therapy and it was found to be superior to qPCR [13]. Having demonstrated both accuracy and precision when validated against other methods of determining copy number, ddPCR has clear potential in diagnostics and genetic engineering.

To that end, we validated ddPCR as a means of screening genetically engineered CAR and TCR T cell products for transgene copy number. Aspects of the ddPCR validation included assessing its accuracy across different copy number levels, along with its precision across time points, across technicians, and across labs. Additionally, preliminary experiments were performed using ddPCR to explore the impact of different manufacturing parameters on resulting transgene copy number. These results demonstrated the potential application of ddPCR for the measurement of vector copy number in cellular therapies.

CAR-T cell production:

The CAR T cell production method is detailed in [19, 20]. In brief, autologous peripheral blood mononuclear cells (PBMCs) collected by apheresis were cultured with an anti-CD3 monoclonal antibody and IL-2 to induce T-cell proliferation. The cells were then transduced with a γ-retroviral vector that encoded a CAR and 7 days after initiation of the cultures the CAR T cells were collected for vector copy number analysis. A similar method was used to manufacture TCR engineered T cells [8, 21] using a γ-retroviral vector that encoded a TCR recognizing HPV16 E7 oncoprotein.

DNA Isolation and Qualification:

Genomic DNA was extracted from genetically engineered T cell samples and untransduced control cells using a Qiagen DNeasy Blood and Tissue Kit (Qiagen). The purity and concentration of the DNA samples were measured using a Nanodrop spectrophotometer (Thermo Fisher Scientific).

ddPCR Copy Number Assays:

A Bio-Rad laboratories Auto DG QX200™ ddPCR system was used for all ddPCR experiments analyzing extracted DNA for vector copy numbers. Full protocols are detailed in manufacturers’ materials: Bio-Rad Laboratories, Inc. (2019) ddPCR™ Supermix for Residual DNA Quantification. Retrieved from http://www.bio-rad.com/webroot/web/pdf/lsr/literature/10048259.pdf.

Bio-Rad Laboratories, Inc. (2019) Automated Droplet Generator Instruction Manual. Retrieved from http://www.bio-rad.com/webroot/web/pdf/lsr/literature/10043138.pdf.

Bio-Rad Laboratories, Inc. (2019) QX200™ Droplet Reader and QuantaSoft™ Software Instruction Manual. Retrieved from .

Estimating ddPCR-based limit of detection

We used an empty lentiviral vector, VSVG, to create 1:5 standard serial dilutions at nine dilution points between 50,000.00 to 0.13 molecules/µL. The 1:5 dilution series was created fresh each time and assessed on droplet digital PCR (ddPCR). We performed ddPCR amplification with the QX200 Droplet Digital PCR System (BioRad, Hercules, CA, USA)[22].

Upper and Lower Limits of Detection

To determine the accuracy of the ddPCR system and its limits of detection a custom set of primers and probes were used to detect an empty lentiviral vector, VSVG, with a known sequence. A serial dilution of this vector was prepared starting from 1 x 10⁶ copies per microliter, diluting down to 1 copy per microliter using a dilution factor of 10. These dilutions were then analyzed using the ddPCR system to determine if the observed copy numbers would reflect the input concentration. It was found that at concentrations of 1 x 10⁵ and 1 x 10⁶ copies per microliter, the QuantaSoft software reported copy numbers of 1 x 10⁶ copies with large error or would not report values at all. Therefore, inputs of 1 x 10⁵ and 1 x 10⁶ copies per microliter were subsequently considered above the limits of detection. For 5 input concentrations below this limit of detection beginning with approximately 1 × 10⁴ copies per microliter, observed copy numbers were averaged (n = 3) and plotted on a log-log graph. A log-log line of best fit revealed good correlation between input concentration and average observed copy number and a R² value of 0.9907 (Fig. 1A).

To estimate the lower limit of detection (LoD), another VSVG serial dilution was prepared using a greater number of dilutions. The dilution series consisted of a nine-point dilution starting from a concentration of 5 × 10⁴ copies per microliter, with a fivefold dilution factor for each point. The dilution series was analyzed using the QuantaSoft software and results plotted on a log-log graph. There was an average of 20,341.84 droplets per well with a maximum of 21,466 droplets in one well. A log-log line of best fit revealed good correlation between input concentration and average observed copy number with an R² value of 0.9994. The lower limit of detection was estimated to be 0.13 copies per microliter as this data point deviated outside of the 95% confidence interval of the line of best fit with a significant standard error of 0.035 (Fig. 1B).

The assay dynamic range was also tested with T cells engineered to express a TCR specific for HPV16 E7 oncoprotein using a retroviral vector. HPV16 E7 oncogene TCR engineered T cells with a 94.9% transduction efficiency were diluted with untransduced T cells serially by 2-fold to a 1:16 dilution and the proportion of TCR engineered T cells in each aliquot was evaluated by flow cytometry (Fig. 2A). The diluted TCR engineered cells were tested in duplicate and when plotted on a log-log graph there was a linear relationship between the transduction efficiency measured and the fold dilution (Fig. 2B). Each of these aliquots was also evaluated for vector copy number using the ddPCR assay. The undiluted cell sample contained 12.75 vector copies per cell and when plotted on a log-log graph there was a linear relationship between the measured vector copy number in the T cell samples and the dilution factor (Fig. 2C). The assay was also tested by diluting the HPV16 E7 oncoprotein TCR retroviral vector with DNA from untransduced cells serially by a factor of 2 and for this dilution method there was also a linear relationship between the vector copy number and the dilution factor (Fig. 2D). This demonstrates the fidelity of the ddPCR system, as a reduction by half of amount of DNA from CAR-T cells in a sample produces a reduction by half of the observed average copy number.

Assessment of the Consistency ddPCR Measurement of CAR Vector Copy Number

Assessing Variation Across Time

To evaluate variation in measuring vector copy number across time, two aliquots (Sample 1, sample2) of cryopreserved anti-BCMA-CAR T cell products that were genetically engineered with a retroviral vector were thawed and evaluated, in triplicate, at three different time points (week 0, 3, 6) spaced three weeks apart. The same person performed all tests using the same instrument. Two-way ANOVA analysis comparing the vector copy number observed across samples and across time found no significant difference between time points (P > 0.05) (Fig. 3A). This shows that the time that a sample is thawed and analyzed has minimal impact on the measured vector copy number.

Assessing Variation Among Assay Laboratory Staff

To assess variation in measuring vector copy number across individuals performing the assay independently, three technicians set up, ran the instrument and analyzed the same aliquots obtained from three CAR T cell products. A two-way ANOVA analysis found no significant differences between copy numbers observed across technicians (P > 0.05) (Fig. 3B), highlighting the repeatability and robustness of this assay.

Application of ddPCR in CAR T Cell Manufacturing

Transduction Conditions and Vector Copy Number

We used the ddPCR vector copy assay to analyze the consistency of the assay when targeting different regions within an anti-GCP3-CAR lentiviral vector. Two different regions were targeted, the EF1a promoter region and the scFv CAR region. We show that there is no significant difference in copy number at multiple multiplicity of infections (MOI) when comparing results from targeting either of these two regions (Figure A (maybe need to make figure comparing vector 1 no spin to vector 2 no spin, but call this EF1A and scFv CAR rather than vector ½)). Data obtained from the ddPCR system also allowed for some preliminary analysis of CAR-T cell production and how manufacturing conditions may impact resulting vector copy number. We used the ddPCR vector copy assay to analyze the effects of differences in multiplicity of infection (MOI) and centrifugation conditions (spinoculation) during transduction on CAR-T cells. The MOIs used for transfection were 5, 10, 20, and 40. The centrifugation conditions applied were centrifugation at 1000 G at 32°C for 2 hours or no centrifugation at all. Furthermore, independent of the region assayed, it was found that greater centrifugation forces increase the resulting copy number at the lower range of MOI’s evaluated but not at the higher MOI’s (Figs. 4A and 4B). We also evaluated the effect of MOI and centrifuge speed on transduction efficiency measured by flow cytometry for CAR T cells manufactured using a lentiviral vector and the results were similar (Fig. 4C). The relationship between transduction efficiency and vector copy number for CAR T cell samples was examined and it was observed that there was a strong correlation between transduction efficiency and vector copy number (Fig. 4D).

These results show that ddPCR can reliably measure the average number of vector copies integrated into CAR and TCR engineered T cells and the system that we tested can provide precise, replicable results. Measurements of vector copy number remained stable across varying input concentrations, time-points, technicians, and laboratory settings. The practical implications of these results are that this ddPCR system can accommodate a range of DNA inputs.

Within a laboratory, the results were consistent even with different staff preforming the assay. As copy number measurements remained consistent across technicians, the ddPCR system demonstrated tolerance for different users within a controlled environment. A point of consideration is that the droplet generation step of the ddPCR protocol used is automated, reducing human error.

Several other types of genetically engineered somatic cells for clinical use are being produced from autologous blood cells. Autologous genetically engineered CD34 + cells are used to treat patients with inherited monogenetic immune deficiencies such as chronic granulomatous disease and severe combined immune deficiency [23, 24]. They are also being used to treat hemoglobinopathies including sickle cell disease and beta thalassemia [25, 26]. In addition to the CAR and TCR engineered T cells, genetically engineered NK cells are being used as cancer immunotherapies[27]. It is expected that this ddPCR assay will be effective in measuring vector copy number in all of these genetically engineered cells.

One limitation of this assay is that it measures the average number of vector copies integrated into the entire population of cells tested. When vector copy number measurements are being used to as a safety measure to ensure that clinical cell therapies do not exceed a defined threshold for the number of copies of vector inserted into the cells, it may be better to measure vector copy number in only transduced cells. However, vector transduction efficiency measured by flow cytometry can be used along with the average vector copy number for the entire cell population to estimate the average vector copy number of transduced cells.

We show that ddPCR is an effective method to assay vector copy number in CAR T cells. The assays should also be applicable to other types of engineered T cells and hematopoietic stem cells.

Ethics approval and consent to participate:

Not applicable

Consent for publication:

Not applicable

Availability of data and materials:

Not applicable

Competing interests

The authors have no competing interests to declare

Funding

Not applicable

Authors' contributions

PJ and DFS conceptualized and designed the study. AL, HL, RS, NG, YC and JM collected data for the study. YC, AL, LS and VR analyzed data. PJ, AL, DFS, SHL, HL and SP wrote and reviewed the manuscript. All authors read and approved the final manuscript.

Acknowledgements

This research was supported by the Intramural Research Program of the NIH, NIH Clinical Center and the National Cancer Institute.

Boyiadzis, M.M., et al., Chimeric antigen receptor (CAR) T therapies for the treatment of hematologic malignancies: clinical perspective and significance. J Immunother Cancer, 2018. 6(1): p. 137.
Salter, A.I., M.J. Pont, and S.R. Riddell, Chimeric antigen receptor-modified T cells: CD19 and the road beyond. Blood, 2018. 131(24): p. 2621-2629.
Lee, D.W., et al., T cells expressing CD19 chimeric antigen receptors for acute lymphoblastic leukaemia in children and young adults: a phase 1 dose-escalation trial. Lancet, 2015. 385(9967): p. 517-528.
Kochenderfer, J.N., et al., Chemotherapy-refractory diffuse large B-cell lymphoma and indolent B-cell malignancies can be effectively treated with autologous T cells expressing an anti-CD19 chimeric antigen receptor. J Clin Oncol, 2015. 33(6): p. 540-9.
Fry, T.J., et al., CD22-targeted CAR T cells induce remission in B-ALL that is naive or resistant to CD19-targeted CAR immunotherapy. Nat Med, 2018. 24(1): p. 20-28.
Raje, N., et al., Anti-BCMA CAR T-Cell Therapy bb2121 in Relapsed or Refractory Multiple Myeloma. N Engl J Med, 2019. 380(18): p. 1726-1737.
Robbins, P.F., et al., Tumor regression in patients with metastatic synovial cell sarcoma and melanoma using genetically engineered lymphocytes reactive with NY-ESO-1. J Clin Oncol, 2011. 29(7): p. 917-24.
Doran, S.L., et al., T-Cell Receptor Gene Therapy for Human Papillomavirus-Associated Epithelial Cancers: A First-in-Human, Phase I/II Study. J Clin Oncol, 2019. 37(30): p. 2759-2768.
Pinheiro, L.B., et al., Evaluation of a droplet digital polymerase chain reaction format for DNA copy number quantification. Anal Chem, 2012. 84(2): p. 1003-11.
Bell, A.D., C.L. Usher, and S.A. McCarroll, Analyzing Copy Number Variation with Droplet Digital PCR. Methods Mol Biol, 2018. 1768: p. 143-160.
Miotke, L., et al., High sensitivity detection and quantitation of DNA copy number and single nucleotide variants with single color droplet digital PCR. Anal Chem, 2014. 86(5): p. 2618-24.
Lock, M., et al., Absolute determination of single-stranded and self-complementary adeno-associated viral vector genome titers by droplet digital PCR. Hum Gene Ther Methods, 2014. 25(2): p. 115-25.
Lin, H.T., et al., Application of Droplet Digital PCR for Estimating Vector Copy Number States in Stem Cell Gene Therapy. Hum Gene Ther Methods, 2016. 27(5): p. 197-208.
Igarashi, Y., et al., Single Cell-Based Vector Tracing in Patients with ADA-SCID Treated with Stem Cell Gene Therapy. Mol Ther Methods Clin Dev, 2017. 6: p. 8-16.
Christodoulou, I., et al., Measurement of lentiviral vector titre and copy number by cross-species duplex quantitative PCR. Gene Ther, 2016. 23(1): p. 113-8.
Hindson, C.M., et al., Absolute quantification by droplet digital PCR versus analog real-time PCR. Nat Methods, 2013. 10(10): p. 1003-5.
Zhang, Y., E.T. Tang, and Z. Du, Detection of MET Gene Copy Number in Cancer Samples Using the Droplet Digital PCR Method. PLoS One, 2016. 11(1): p. e0146784.
Sun, Y. and P.A. Joyce, Application of droplet digital PCR to determine copy number of endogenous genes and transgenes in sugarcane. Plant Cell Rep, 2017. 36(11): p. 1775-1783.
Ali, S.A., et al., T cells expressing an anti-B-cell maturation antigen chimeric antigen receptor cause remissions of multiple myeloma. Blood, 2016. 128(13): p. 1688-700.
Stroncek, D.F., et al., Myeloid cells in peripheral blood mononuclear cell concentrates inhibit the expansion of chimeric antigen receptor T cells. Cytotherapy, 2016. 18(7): p. 893-901.
Jin, J., et al., Enhanced clinical-scale manufacturing of TCR transduced T-cells using closed culture system modules. J Transl Med, 2018. 16(1): p. 13.
Hunter, M.E., et al., Detection limits of quantitative and digital PCR assays and their influence in presence-absence surveys of environmental DNA. Mol Ecol Resour, 2017. 17(2): p. 221-229.
Keller, M.D., L.D. Notarangelo, and H.L. Malech, Future of Care for Patients With Chronic Granulomatous Disease: Gene Therapy and Targeted Molecular Medicine. J Pediatric Infect Dis Soc, 2018. 7(suppl_1): p. S40-S44.
Fischer, A. and S. Hacein-Bey-Abina, Gene therapy for severe combined immunodeficiencies and beyond. J Exp Med, 2020. 217(2).
Thompson, A.A., et al., Gene Therapy in Patients with Transfusion-Dependent beta-Thalassemia. N Engl J Med, 2018. 378(16): p. 1479-1493.
Ribeil, J.A., et al., Gene Therapy in a Patient with Sickle Cell Disease. N Engl J Med, 2017. 376(9): p. 848-855.
Rezvani, K., et al., Engineering Natural Killer Cells for Cancer Immunotherapy. Mol Ther, 2017. 25(8): p. 1769-1781.

Download PDF

Journal Publication

published 08 May, 2020

Read the published version in Journal of Translational Medicine →

Review #2 received at journal
14 Apr, 2020
Editorial decision: Minor revision
14 Apr, 2020
Reviewer #3 agreed at journal
03 Apr, 2020
Review #1 received at journal
02 Apr, 2020
Reviewer #2 agreed at journal
01 Apr, 2020
Reviewer #1 agreed at journal
31 Mar, 2020
Editor assigned by journal
30 Mar, 2020
Reviewers invited by journal
30 Mar, 2020
Editor invited by journal
29 Mar, 2020
Submission checks completed at journal
28 Mar, 2020
First submitted to journal
27 Mar, 2020

You are reading this older preprint version

Read the latest preprint version →

Application of Droplet Digital PCR for the Detection of Vector Copy Number in Clinical CAR/TCR T-Cell Products

Status:

Journal Publication

Version 1

Abstract

Figures

Background

Materials And Methods

CAR-T cell production:

DNA Isolation and Qualification:

ddPCR Copy Number Assays:

Estimating ddPCR-based limit of detection

Results

Upper and Lower Limits of Detection

Assessment of the Consistency ddPCR Measurement of CAR Vector Copy Number

Assessing Variation Across Time

Assessing Variation Among Assay Laboratory Staff

Application of ddPCR in CAR T Cell Manufacturing

Transduction Conditions and Vector Copy Number

Discussion

Conclusion

Declarations

References

Status:

Journal Publication

Version 1