Production of rare earths by metallothermic reduction and its variants is presented in an earlier study and its analysis is performed indicating major type and sequence of reactions. Diagrams required and procedures to establish them are also described. Their role and importance are also described. A comparison is also made to identify parameters of importance. This study is continuation of a previous study in which cell design to extract metals is described. Parameters to design and construct cell (metallothermic and electrothermic) are determined and used. Rate processes (heat transfer, mass transfer, charge transfer and simultaneous processes) occurring inside a cell, its operation for a specific reaction and sequence for a specific metal (Nd) are described. Outline of calculations outlining cell efficiency, output and yield are enumerated for individual (Nd, Ce, Dy) metal. Optimization and method to achieve is described. Procedures to control and production is also described. Here preliminary graphs are presented.
Short Report
Pyrometallurgy and Electrometallurgy of Rare Earths – Part B: Cell design, construction, rate processes, and unit operation
https://doi.org/10.21203/rs.3.rs-2126620/v1
This work is licensed under a CC BY 4.0 License
Version 1
posted
You are reading this latest preprint version
Essentially, pyrometallurgical processes involves design of furnace for melting, holding, and refining of metal oxides and compounds while electrowinning and electrorefining (after pyrometallurgy) involves design and control of electrochemical cell (room or high temperature) operated by the fundamental principles of current density, its control, distribution, and electromotive force (EMF). Its detail may be found in specialized texts [1–7] and literature [8–11]. This study is continuation of previous study of author [12] on the subject describing extraction and refining of rare earths from their ores by metallothermic reduction. In this area of emphasis is cell design and rate processes (heat, mass, and activity coefficient determination) which lead towards economic production of these metals from their source. Various graphs and carts are presented lying emphasis on the efficient extraction and refining of rare earths. Nd-Fe foundry alloy is taken as example to describe construction and operation of cell. Unit operation including piping and instrumentation diagrams (P&IDs) is described to explain different (Elution and electrowinning) circuits. Lastly, a future outlook is presented to calculate individual efficiency and throughput.
Cell design of rare earth electrowinning process depends on type of metal won (Nd [8], Sm, W, Th, U, Ce, Sc), its quantity required, production rate, type of electrolyte, concentration of metal in electrolyte and flow rate of electrolyte.
Cell design primarily consists of outlining parameters of its construction based on its holding capacity. It may be carried out in various ways such as production rate, throughput, efficiency, yield but design based on holding capacity constitutes the simplest. It is presented here.
Consider a typical cell of 5 ton / day. For this, considering rectangular dimensions (as they ease out operation and maximizes yield)
Research progress in development and processing of rare earths may be described following [13, 14]. Density of a typical metal as a function of concentration and temperature is presented by following equation.
𝜌 = −6.53212 × 10−4𝑐2 − 0.06987𝑐 + 1.31265 × 10−5𝑇2 − 0.05297𝑇 + 1.69004 × 10−4𝑐𝑇+ 43.14013
Solubility and dissolution of rare earth oxide in the fluoride melt [15]
Rare earths in their oxide forms may exhibit solubility and may be dissolved in their oxide and fluoride electrolyte melts.
Nd2O3 solubility in fluoride melts with different NdF3-LiF compositions and at different temperatures [15].
Production of Nd-Fe foundry alloy by the electrolysis of neodymium fluoride
During the electrolysis of these melts at the electrodes the following reactions are taking place: at the graphite anode. [16]
at the iron cathode:
Production of Nd-Fe foundry alloy by the electrolysis of neodymium oxide
During the electrolysis of neodymium oxide in fluoride melts at the electrodes the following reactions are taking place at the graphite anode [16]
at the iron cathode:
Coefficients
Following coefficients are important, must be considered and calculated for effective electrometallurgical operations. Activity coefficients, diffusion coefficients, equilibrium separation coefficients, effective separation coefficients.
Vapor pressure
Cell efficiency
Cell efficiency may be calculated by measuring the concentration of reactant and product species in electrolyte. An excellent study documents these in Cerium [18]. Interested reader is referred to it for further details.
Mass transfer
Mass transfer coefficients, solubility of rare earth oxides in molten fluorides, oxide solubility determinations, oxide solubility diagrams. Prior to the proper oxide solubility determinations and diagram development, the equilibration time for oxide source dissolution, e.g., Dy2O3 and Dy2(CO3)3, was determined. It was determined by adding a certain amount of the oxide source (below solubility limit) and sample analysis thereafter at certain intervals. The time of equilibrium dissolution is measured by noting time at which the analyzed oxide content becomes constant. Below figures (Fig – 5) show the results obtained when Dy2O3 was added to the DyF3-LiF melts at different compositions, i.e., DyF3 (50 mol pct)-LiF (50 mol pct) and DyF3 (20 mol pct)-LiF (80 mol pct), at a working temperature of 1323 K (1050 C). The results showed that in the case of the eutectic composition longer dissolution times than in the equimolar composition are needed, in which case, all Dy2O3 added is dissolved well within 30 minutes.
Diagrams for electrodeposition of Nd from its salts are described below [19]
Unit operations consist of drawing procedures to operate plant, optimize them, making P&IDs, setting them, calculating reactions and their sequences, and calculating efficiencies and throughput.
Piping and Instrumentation Diagrams (P&IDs)
Piping and Instrumentation Diagrams (P&IDs) for rare earths. For a typical 5 ton / day plant, example optimized P&IDs are developed. Example P&IDs for Au processing plants are shown here [20].
Efficiency and throughput
Efficiency and throughput of individual cell comprising of circuits and P&IDs constitutes an important part of the process and an important rare determining step. These must be carefully calculated and will be presented in subsequent studies with details about each and every individual step.
Various relations may be used to drive and arrive at optimum relations for efficient electrometallurgical operation of cell for efficient extraction and refining of rare earth metals from their salts. These in turn may depend on various intrinsic factors such as activity, heat, and mass transfer coefficients.
- Lucas, J., et al., Rare Earths: Science, Technology, Production and Use. 2014: Elsevier Science.
- Habashi, F., Extractive metallurgy of rare earths. Canadian Metallurgical Quarterly, 2013. 52: p. 224–233.
- Krishnamurthy, N. and C.K. Gupta, Extractive Metallurgy of Rare Earths, Second Edition. 2015: Taylor & Francis.
- Paunovic, M. and M. Schlesinger, Fundamentals of Electrochemical Deposition. 2006: Wiley.
- Popov, K., B. Grgur, and S.S. Djokić, Fundamental Aspects of Electrometallurgy. 2007: Springer US.
- Zelikman, A.N., O.E. Kreĭn, and G.V. Samsonov, Metallurgy of Rare Metals. 2018: Nova Science Publishers, Incorporated.
- Qi, D., Hydrometallurgy of Rare Earths: Extraction and Separation. 2018: Elsevier Science.
- Yang, Y., et al., Recovery of rare-earth element from rare-earth permanent magnet waste by electro-refining in molten fluorides. Separation and Purification Technology, 2020. 233: p. 116030.
- Gupta, C.K. and N. Krishnamurthy, Extractive metallurgy of rare earths. International Materials Reviews, 1992. 37(1): p. 197–248.
- Balaram, V., Rare earth elements: A review of applications, occurrence, exploration, analysis, recycling, and environmental impact. Geoscience Frontiers, 2019. 10(4): p. 1285–1303.
- Xie, F., et al., A critical review on solvent extraction of rare earths from aqueous solutions. Minerals Engineering, 2014. 56: p. 10–28.
- Rafique, M., Pyrometallurgy and Electrometallurgy of Rare Earths – Part A: Analysis of Metallothermic Reduction and its Variants. 2021.
- Liu, H., et al., Research Progress in Preparation and Purification of Rare Earth Metals. Metals, 2020. 10(10): p. 1376.
- Senanu, S., et al., Dissolution and Online Monitoring of Nd and Pr Oxides in NdF3–PrF3–LiF Electrolytes. Metals, 2021. 11(2): p. 326.
- Guo, X., J. Sietsma, and Y. Yang, Solubility of rare earth oxides in molten fluorides. ERES2014, 2014: p. 149–155.
- Makaseev, Y., et al., Production of Nd-Fe Foundry Alloy by Electrolysis in Molten Salts. MATEC Web of Conferences, 2017. 96: p. 00009.
- Isshiki, M., Purification of rare earth metals. Vacuum, 1996. 47(6): p. 885–887.
- Thomas, N.B., An investigation of some aspects of cerium electrowinning. 1986.
- Stefanidaki, E., C. Hasiotis, and C. Kontoyannis, Electrodeposition of neodymium from LiF–NdF3–Nd2O3 melts. Electrochimica Acta, 2001. 46(17): p. 2665–2670.
- Lunga, A.L. Optimizing the operating conditions of gold elution and electrowinning for Tau Lekoa stream at Kopanang gold plant. 2008.
Competing interests: The authors declare no competing interests.