[1] W.-Y. Sun, T.-Y. Tien, T.-S. Yen, Subsolidus Phase Relationships in Part of the System Si,Al,Y/N,O: The System Si3N4AINYNAl2O3Y2O3, J. Am. Ceram. Soc. 74 (1991) 2753–2758.
[2] R.-J. Xie, N. Hirosaki, K. Sakuma, Y. Yamamoto, M. Mitomo, Eu2+-doped Ca-α-SiAlON: A yellow phosphor for white light-emitting diodes, Appl. Phys. Lett. 84 (2004) 5404–5406.
[3] J. Grins, S. Esmaeilzadeh, Z. Shen, Structures of Filled α-Si3N4-Type Ca0.27La0.03Si11.38 Al0.62N16 and LiSi9Al3O2N14, J. Am. Ceram. Soc. 86 (2003) 727–30.
[4] S. Suzuki, T. Nasu, S. Hayama, M. Ozawa, Mechanical and thermal properties of beta’-sialon prepared by a slip casting method, J. Am. Ceram. Soc. 79 (1996) 1685–1688.
[5] F. Izumi, M. Mitomo, Y. Bando, Rietveld refinements for calcium and yttrium containing α-sialons, J. Mater. Sci. 19 (1984) 3115–3120.
[6] M.J. Pomeroy, C. Mulcahy, S. Hampshire, Independent effects of nitrogen substitution for oxygen and yttrium substitution for magnesium on the properties of Mg-Y-Si-Al-O-N Glasses, J. Am. Ceram. Soc. 86 (2003) 458–464.
[7] V.A. Gunchenko, V.N. Pavlikov, G. V. Trunov, Kinetics and mechanism of oxidation of β-sialons, Sov. Powder Metall. Met. Ceram. 27 (1988) 470–474.
[8] J. Persson, T. Ekström, P.O. Käll, M. Nygren, Oxidation behaviour and mechanical properties of β- and mixed α-β-sialons sintered with additions of Y2O3and Nd2O3, J. Eur. Ceram. Soc. 11 (1993) 363–373.
[9] L. Liu, R.-J. Xie, N. Hirosaki, T. Takeda, C. Zhang, J. Li, X. Sun, Photoluminescence properties of β-SiAlON:Yb2+, a novel green-emitting phosphor for white light-emitting diodes, Sci. Technol. Adv. Mater. 12 (2011) 034404.
[10] P.L. Wang, C. Zhang, W.Y. Sun, D.S. Yan, Characteristics of Ca-α-sialon—Phase formation, microstructure and mechanical properties, J. Eur. Ceram. Soc. 19 (1999) 553–560.
[11] J.W.T. van Rutten, H.T. Hintzen, R. Metselaar, Phase formation of Ca-α-sialon by reaction sintering, J. Eur. Ceram. Soc. 16 (1996) 995–999.
[12] F.L. Riley, Silicon Nitride and Related Materials, J. Am. Ceram. Soc. 83 (2004) 245–265.
[13] S. Hampshire, H.K. Park, D.P. Thompson, K.H. Jack, α′-Sialon ceramics, Nature. 274 (1978) 880–882.
[14] Z.-K. Huang, P. Greil, G. Petzow, Formation of alpha-Si3N4 solid solutions in the system Si3N4-A1N-Y2O3, J. Am. Ceram. Soc. 66 (1983) C–96–C–97.
[15] Z.-K. Huang, T.-Y. Tien, T.-S. Yen, Subsolidus phase relationships in Si3N4-AlN-rare-earth oxide systems, J. Am. Ceram. Soc. 69 (1986) C–241–C–242.
[16] S.-F. Kuang, Z.-K. Huang, W.-Y. Sun, T.-S. Yen, Phase relationships in the Li2O-Si3N4-AlN system and the formation of lithium-α-sialon, J. Mater. Sci. Lett. 9 (1990) 72–74.
[17] Z.-K. Huang, W.-Y. Sun, D.-S. Yan, Phase relations of the Si3N4-AIN-CaO system, J. Mater. Sci. Lett. 4 (1985) 255–259.
[18] M. Herrmann, S. Kurama, H. Mandal, Investigation of the phase composition and stability of the α-SiAlONs by the Rietveld method, J. Eur. Ceram. Soc. 22 (2002) 2997–3005.
[19] S.K.M.H. H.Mandal, The effect of processing conditions, amount of additives and composition on the microstructures and mechanical properties of α-SiAlON ceramics, J. Eur. Ceram. Soc. 22 (2002) 109–119.
[20] T.-S. Sheu, Microstructure and Mechanical properties of the in situ beta-si3n4/alpha’-sialon composite, J. Am. Ceram. Soc. 77 (1994) 2345–2353.
[21] T. Ekstrom, M. Nygren, SiAION Ceramics, J. Am. Ceram. Soc. 75 (1992) 259–276.
[22] H. Mandal, D.P. Thompson, α→β Sialon transformation in calcium-containing α-sialon ceramics, J. Eur. Ceram. Soc. 19 (1999) 543–552.
[23] Y.B. Xie, Rong-Jun, Mamoru Mitomo, F. F. Xu, Preparation of Ca-α-sialon ceramics with compositions along the Si3N4-1/2 Ca3N2:3AlN line, Z. Met. 92 (2001) 931–936.
[24] Y. Cai, Synthesis and characterization of nitrogen-rich calcium [alpha]-sialon ceramics, Department of Physical, Inorganic and Structural Chemistry, Stockholm University, 2009. https://books.google.com.sa/books?id=65ryjwEACAAJ.
[25] C.A. Wood, H. Zhao, Y.-B. Cheng, Microstructural development of calcium alpha-sialon ceramics with elongated grains, J. Am. Ceram. Soc. 82 (2004) 421–428.
[26] F. Ye, M.J. Hoffmann, S. Holzer, Y. Zhou, M. Iwasa, Effect of the amount of additives and post-heat treatment on the microstructure and mechanical properties of Yttrium-α-Sialon Ceramics, J. Am. Ceram. Soc. 86 (2003) 2136–2142.
[27] Z. Shen, H. Peng, M. Nygren, Formation of in-situ reinforced microstructure in α–sialon ceramics I: Stoichiometric oxygen-rich compositions, J. Mater. Res. 17 (2002) 336–342.
[28] Y. Cai, Z. Shen, J. Grins, S. Esmaeilzadeh, T. Höche, Self-Reinforced Nitrogen-rich calcium α-sialon ceramics, J. Am. Ceram. Soc. 90 (2007) 608–613.
[29] Wikipedia contributors, Hot pressing-Wikipedia The Free Encyclopedia, accessed August 16, 2018.
https://en.wikipedia.org/w/index.php?title=Hot_pressing&oldid=827939071.
[30] FCT Systeme GmbH , accessed August 16, 2018.
http://www.fct-systeme.de/en/content/Spark_Plasma_Sinteranlagen/~nm.12~nc.26
[31] R.M.A. Khan, M.M. Al Malki, A.S. Hakeem, M.A. Ehsan, T. Laoui, Development of a single-phase Ca-α-SiAlON ceramic from nanosized precursors using spark plasma sintering, Mater. Sci. Eng. A. 673 (2016) 243–249.
[32] N. Camuşcu, D.P. Thompson, H. Mandal, Effect of starting composition, type of rare earth sintering additive and amount of liquid phase on αa ⇆ β sialon transformation, J. Eur. Ceram. Soc. 17 (1997) 599–613.
[33] B.A. Ahmed, A.S. Hakeem, T. Laoui, R.M.A. Khan, M.M. Al Malki, A. Ul-Hamid, F.A. Khalid, N. Bakhsh, Effect of precursor size on the structure and mechanical properties of calcium-stabilized sialon/cubic boron nitride nanocomposites, J. Alloys Compd. 728 (2017) 836-843.
[34] H.M. Irshad, B.A. Ahmed, M.A. Ehsan, T.I. Khan, T. Laoui, M.R. Yousaf, A. Ibrahim, A.S. Hakeem, Investigation of the structural and mechanical properties of micro-/nano-sized Al2O3 and cBN composites prepared by spark plasma sintering, Ceram. Int. 43 (2017) 10645–10653.
[35] M.M. Al Malki, R.M.A. Khan, A.S. Hakeem, S. Hampshire, T. Laoui, Effect of Al metal precursor on the phase formation and mechanical properties of fine-grained SiAlON ceramics prepared by spark plasma sintering, J. Eur. Ceram. Soc. 37 (2017) 1975–1983.
[36] B.A. Ahmed, A.S. Hakeem, T. Laoui, M. Al Malki, M.A. Ehsan, S. Ali, Low-temperature spark plasma sintering of calcium stabilized alpha sialon using nano-size aluminum nitride precursor, Int. J. Refract. Met. Hard Mater. 71 (2018) 301–306.
[37] 12013-82-0 CAS MSDS (calcium nitride) Melting Point Boiling Point Density CAS Chemical Properties, accessed September 24, 2017.
http://www.chemicalbook.com/ChemicalProductProperty_US_CB2672982.aspx
[38] P.L. Wang, C. Zhang, W.Y. Sun, D.S. Yan, Formation behavior of multi-cation α-sialons containing calcium and magnesium, Mater. Lett. 38 (1999) 178–185.
[39] O. Eser, S. Kurama, A comparison of sintering techniques using different particle sized β-SiAlON powders, J. Eur. Ceram. Soc. 32 (2012) 1343–1347.
[40] O. Eser, S. Kurama, The effect of the wet-milling process on sintering temperature and the amount of additive of SiAlON ceramics, Ceram. Int. 36 (2010) 1283–1288.
[41] C.L. Hewett, Y.-B. Cheng, B.C. Muddle, M.B. Trigg, Thermal Stability of Calcium α-sialon Ceramics, J. Eur. Ceram. Soc. 18 (1998) 417–427.
[42] A. Thorel ’", J.Y. Laval+, D. Broussaud, High temperature mechanical properties and intergranular structure of sialons, Journal de Physique Colloques, 1986, 47 (C1), 353-357.
[43] S.R. Witek, G.A. Miller, M.P. Harmer, Effects of CaO on the strength and toughness of AIN, J. Am. Ceram. Soc. 72 (1989) 469–473.
[44] Z.-H. Xie, M. Hoffman, Y.-B. Cheng, Microstructural tailoring and characterization of a calcium α-sialon composition, J. Am. Ceram. Soc. 85 (2004) 812–818.
[45] Y. Zhang, Y.-B. Cheng, Grain boundary devitrification of Ca α-sialon ceramics and its relation with the fracture toughness, J. Mater. Sci. 38 (2003) 1359–1364.
[46] A. de Lofaj, F; Dorcakova, F; Kovalcik, J; Hoffmann, MJ; Lopez, The effect of lanthanides and nitrogen on microhardness of oxynitride, Kov. Mater. Mater. 41 (2003) 145–157.