1. Davim JP, Barricas N, Conceicao M, Oliveira C (2008) Some experimental studies on CO2 laser cutting quality of polymeric materials. Journal of materials processing technology 198 (1-3):99-104
2. Mushtaq RT, Wang Y, Rehman M, Khan AM, Mia M (2020) State-Of-The-Art and Trends in CO2 Laser Cutting of Polymeric Materials—A Review. Materials 13 (17):3839
3. Romoli L, Tantussi G, Dini G (2011) Experimental approach to the laser machining of PMMA substrates for the fabrication of microfluidic devices. Optics and Lasers in Engineering 49 (3):419-427
4. Muangpool T, Pullteap S Reviews on laser cutting technology for industrial applications. In: Third International Conference on Photonics Solutions (ICPS2017), 2018. International Society for Optics and Photonics, p 107140Q
5. Haddadi E, Moradi M, Karimzad Ghavidel A, Karimzad Ghavidel A, Meiabadi S (2019) Experimental and parametric evaluation of cut quality characteristics in CO2 laser cutting of polystyrene. Optik 184:103-114. doi:https://doi.org/10.1016/j.ijleo.2019.03.040
6. Moradi M, Abdollahi H (2017) Statistical modelling and optimization of the laser percussion microdrilling of thin sheet stainless steel. Journal of lasers in Engineering
7. Chryssolouris G (2013) Laser machining: theory and practice. Springer Science & Business Media,
8. Stournaras A, Stavropoulos P, Salonitis K, Chryssolouris G (2009) An investigation of quality in CO2 laser cutting of aluminum. CIRP Journal of Manufacturing Science and Technology 2 (1):61-69
9. Zhou BH, Mahdavian S (2004) Experimental and theoretical analyses of cutting nonmetallic materials by low power CO2-laser. Journal of materials processing technology 146 (2):188-192
10. Moradi M, Mehrabi O, Azdast T, Benyounis KY (2017) Enhancement of low power CO2 laser cutting process for injection molded polycarbonate. Optics & Laser Technology 96:208-218
11. Tamrin K, Nukman Y, Choudhury I, Shirley S (2015) Multiple-objective optimization in precision laser cutting of different thermoplastics. Optics and Lasers in Engineering 67:57-65
12. Cardoso RM, Santos ROd, Munoz RA, Garcia CD, Blanes L (2020) A Multi-Pump Magnetohydrodynamics Lab-On-A-Chip Device for Automated Flow Control and Analyte Delivery. Sensors 20 (17):4909
13. Conzelmann J, Schwarz FB, Hamm B, Scheel M, Jahnke P (2020) Development of a method to create uniform phantoms for task‐based assessment of CT image quality. Journal of Applied Clinical Medical Physics 21 (9):201-208
14. Sen A, Doloi B, Bhattacharyya B (2020) Parametric influences of fiber laser micro-machining for the generation of micro-channels on PMMA. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42 (8):1-13
15. Lubis L, Hariyati I, Ryangga D, Mu'minah I, Mart T, Soejoko D (2020) Construction and Evaluation of a Multipurpose Performance Check Phantom for Computed Tomography. Atom Indonesia 46 (2):69-75
16. Çaydaş U, Hasçalık A (2008) Use of the grey relational analysis to determine optimum laser cutting parameters with multi-performance characteristics. Optics & laser technology 40 (7):987-994
17. Hossain A, Hossain A, Nukman Y, Hassan M, Harizam M, Sifullah A, Parandoush P (2016) A fuzzy logic-based prediction model for kerf width in laser beam machining. Materials and Manufacturing Processes 31 (5):679-684
18. Varsi AM, Shaikh AH (2019) Experimental and statistical study on kerf taper angle during CO2 laser cutting of thermoplastic material. Journal of Laser Applications 31 (3):032010
19. Davim JP, Oliveira C, Barricas N, Conceição M (2008) Evaluation of cutting quality of PMMA using CO 2 lasers. The International Journal of Advanced Manufacturing Technology 35 (9-10):875-879
20. Nayak NC, Lam Y, Yue C, Sinha AT (2008) CO2-laser micromachining of PMMA: the effect of polymer molecular weight. Journal of micromechanics and microengineering 18 (9):095020
21. Caiazzo F, Curcio F, Daurelio G, Minutolo FMC (2005) Laser cutting of different polymeric plastics (PE, PP and PC) by a CO2 laser beam. Journal of Materials Processing Technology 159 (3):279-285
22. Karagiannis S, Stavropoulos P, Ziogas C, Kechagias J (2014) Prediction of surface roughness magnitude in computer numerical controlled end milling processes using neural networks, by considering a set of influence parameters: an aluminium alloy 5083 case study. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228 (2):233-244
23. Choudhury IA, Shirley S (2010) Laser cutting of polymeric materials: an experimental investigation. Optics & Laser Technology 42 (3):503-508
24. Nukman Y, Hassan M, Harizam M (2013) Optimization of prediction error in CO2 laser cutting process by Taguchi artificial neural network hybrid with genetic algorithm. Applied Mathematics & Information Sciences 7 (1):363-370
25. Moradi M, Moghadam MK, Shamsborhan M, Beiranvand ZM, Rasouli A, Vahdati M, Bakhtiari A, Bodaghi M (2020) Simulation, statistical modeling, and optimization of CO2 laser cutting process of polycarbonate sheets. Optik:164932
26. Elsheikh AH, Deng W, Showaib EA (2020) Improving laser cutting quality of polymethylmethacrylate sheet: experimental investigation and optimization. Journal of Materials Research and Technology 9 (2):1325-1339
27. Atanasov P, Baeva M (1997) CW CO2 laser cutting of plastics, vol 3092. XI International Symposium on Gas Flow and Chemical Lasers and High Power Laser Conference. SPIE,
28. Karagiannis S, Ispoglou T, Stavropoulos P, Kechagias J Multi parameter optimization using Taguchi L8 (27) Array-A case study on additive paper lamination process. In: Proceedings of the 1st International Conference on Mathematical Methods & Computational Techniques in Science & Engineering, MMCTSE 2014, Athens, Gr, 2014. pp 110-113
29. Kechagias JD, Ninikas K, Petousis M, Vidakis N, Vaxevanidis N (2021) An investigation of surface quality characteristics of 3D printed PLA plates cut by CO2 laser using experimental design. Materials and Manufacturing Processes:1-10. doi:10.1080/10426914.2021.1906892
30. Kechagias J, Stavropoulos P, Koutsomichalis A, Ntintakis I, Vaxevanidis N (2014) Dimensional accuracy optimization of prototypes produced by PolyJet direct 3D printing technology. Advances in Engineering Mechanics and Materials:61-65
31. Stavropoulos P, Salonitis K, Stournaras A, Pandremenos J, Paralikas J, Chryssolouris G Experimental investigation of micro-milling process quality. In: 40th CIRP International Seminar on Manufacturing Systems, Liverpool, 2007.
32. Anon (2020) bodor. www.bodor.com/en/. Accessed 18/09/2020
33. Anon (2020) rdworks. https://rdworks.software.informer.com/8.0/. Accessed 18/09/2020
34. Anon (2020) irishelectronics. https://irishelectronics.ie/WebRoot/Register365/Shops/950018241/5CBE/ED52/5AF1/8897/B735/C0A8/190E/F401/Digital_Microscope_General_Instruction.pdf Accessed 28/09/2020
35. Kechagias JD, Aslani K-E, Fountas NA, Vaxevanidis NM, Manolakos DE (2020) A comparative investigation of Taguchi and full factorial design for machinability prediction in turning of a titanium alloy. Measurement 151:107213
36. Ninikas K, Kechagias J, Salonitis K (2021) The Impact of Process Parameters on Surface Roughness and Dimensional Accuracy during CO2 Laser Cutting of PMMA Thin Sheets. Journal of Manufacturing and Materials Processing 5 (3):74
37. Phadke MS (1995) Quality engineering using robust design. Prentice Hall PTR,
38. Omidvar M, Fard RK, Sohrabpoor H, Teimouri R (2015) Selection of laser bending process parameters for maximal deformation angle through neural network and teaching–learning-based optimization algorithm. Soft Computing 19 (3):609-620
39. Kim KS, Choi HH, Moon CS, Mun CW (2011) Comparison of k-nearest neighbor, quadratic discriminant and linear discriminant analysis in classification of electromyogram signals based on the wrist-motion directions. Current applied physics 11 (3):740-745
40. Vidakis N, Petousis M, Vaxevanidis N, Kechagias J (2020) Surface Roughness Investigation of Poly-Jet 3D Printing. Mathematics 8 (10):1758
41. Kechagias J, Tsiolikas A, Asteris P, Vaxevanidis N Optimizing ANN performance using DOE: application on turning of a titanium alloy. In: MATEC Web of Conferences, 2018. EDP Sciences, p 01017
42. Kechagias J, Iakovakis V (2009) A neural network solution for LOM process performance. The International Journal of Advanced Manufacturing Technology 43 (11-12):1214-1222
43. Žic M, Subotić V, Pereverzyev S, Fajfar I (2020) Solving CNLS problems using Levenberg-Marquardt algorithm: A new fitting strategy combining limits and a symbolic Jacobian matrix. Journal of Electroanalytical Chemistry 866:114171