A binary direct Z-scheme LaNiO 3 /g-C 3 N 4 nanocomposite photocatalyst consisted with LaNiO 3 nanoparticles and g-C 3 N 4 nanosheets was successfully synthesized by means of mechanical mixing and solvothermal methods in order to improve the photocatalytic water splitting activity. The as-prepared materials were characterized by powder X-ray diffraction (XRD), Scanning Electron microscope (SEM), Transmission Electron microscope (TEM), X-ray photoelectron spectroscope (XPS), Fourier Transform Infrared Spectroscopy (FT-IR) and N 2 adsorption-desorption experiments, respectively, demonstrating the formation of interfacial interaction and heterogeneous structure in LaNiO 3 /g-C 3 N 4 nanocomposites. Under UV-light irradiation, the LaNiO 3 /g-C 3 N 4 samples which without the addition of any noble metal as co-catalyst behaved enhanced photocatalytic water splitting activity compared with pure LaNiO 3 and g-C 3 N 4 , owing to the Z-scheme charge carrier transfer pathway. Especially, the LaNiO 3 /70%g-C 3 N 4 nanocomposite reach an optimal yield of up to 3392.50 µmol g -1 in 5 h and held a maximum H 2 evolution rate of 678.5 µmol h -1 g -1 that was 5 times higher than that of pure LaNiO 3 .

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

Figure 8

Figure 9

Figure 10
The full text of this article is available to read as a PDF.
This is a list of supplementary files associated with this preprint. Click to download.
Loading...
Posted 20 May, 2020
On 14 May, 2020
On 13 May, 2020
On 13 May, 2020
On 28 Apr, 2020
Posted 20 May, 2020
On 14 May, 2020
On 13 May, 2020
On 13 May, 2020
On 28 Apr, 2020
A binary direct Z-scheme LaNiO 3 /g-C 3 N 4 nanocomposite photocatalyst consisted with LaNiO 3 nanoparticles and g-C 3 N 4 nanosheets was successfully synthesized by means of mechanical mixing and solvothermal methods in order to improve the photocatalytic water splitting activity. The as-prepared materials were characterized by powder X-ray diffraction (XRD), Scanning Electron microscope (SEM), Transmission Electron microscope (TEM), X-ray photoelectron spectroscope (XPS), Fourier Transform Infrared Spectroscopy (FT-IR) and N 2 adsorption-desorption experiments, respectively, demonstrating the formation of interfacial interaction and heterogeneous structure in LaNiO 3 /g-C 3 N 4 nanocomposites. Under UV-light irradiation, the LaNiO 3 /g-C 3 N 4 samples which without the addition of any noble metal as co-catalyst behaved enhanced photocatalytic water splitting activity compared with pure LaNiO 3 and g-C 3 N 4 , owing to the Z-scheme charge carrier transfer pathway. Especially, the LaNiO 3 /70%g-C 3 N 4 nanocomposite reach an optimal yield of up to 3392.50 µmol g -1 in 5 h and held a maximum H 2 evolution rate of 678.5 µmol h -1 g -1 that was 5 times higher than that of pure LaNiO 3 .

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

Figure 8

Figure 9

Figure 10
The full text of this article is available to read as a PDF.
This is a list of supplementary files associated with this preprint. Click to download.
Loading...