Acknowledgments
This research was supported by Nano·Material Technology Development Program through the National Research Foundation of Korea (NRF) funded by Ministry of Science and ICT (NRF-2020M3H4A3082530), National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. 2021M3H4A6A02050365). This research was sponsored by the Devices & Materials Lab, one of the research centers at LG Electronics. The authors would like to thank Dr. Jeong Soo Lee (Executive director of CTO) and Jung Ho Yoo at the National NanoFab Center (NNFC) for their assistance.
Conflict of interest
The authors have no relevant financial or non-financial interests to disclose
Authors and Affiliations
Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST) 291 Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
Yusra Qureshi, Jungjae Park, Namgyu Noh, Jong Min Yuk
Devices & Materials Lab, LG Electronics, LG Science Park, Magokjungang 10-ro 10, Gangseo-gu, Seoul 07796, Republic of Korea
Byung Oh Jung, Young Hwan Min, Ko Un Park, Hui-Youn Shin, Minho Joo, Eun Seck Kang
Pohang Accelerator Laboratory, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea
Boknam Chae
Contributions
Yusra Qureshi: conceptualization, investigation, writing—original draft. Byung Oh Jung: methodology, investigation, writing—review & editing. Young Hwan Min: methodology, investigation, writing—review & editing. Jungjae Park: conceptualization, investigation, data analysis writing—review & editing. Ko Un Park: methodology, investigation. Namgyu Noh: conceptualization, data analysis. Boknam Chae: investigation, data analysis. Hui-Youn Shin: methodology, investigation. Minho Joo: investigation, data analysis. Eun Seck Kang: supervision, writing—review & editing. Jong Min Yuk: conceptualization, supervision, writing—review & editing.
Corresponding author
Correspondence to Jong Min Yuk and Eun Seck Kang.
Consent for publication
All authors have reviewed manuscript and provide consent for publication.