Based on the results of tire handling test, the cornering properties of the tire at a small range of steer angles under different temperature are obtained, and the variation law of the tire cornering characteristic parameters with the tire temperature is obtained. By establishing a tread temperature model and finite element tire model considering temperature, the mechanism of tire mechanical properties with temperature is clarified, and the expression of tread stiffness and aligning stiffness considering temperature is obtained. Then, based on the above expression and the tire brush model considering the tire temperature state, a complex brush model is established. Through the model derivation, the relationship between the temperature and the tire cornering stiffness is obtained. The relationship is used as the basic expression formula to establish the UniTire cornering model considering tire temperature. In order to verify the correctness of the model, four kinds of temperature state cornering data are used for parameter identification, and the tire cornering properties in the other two temperature states is predicted. The error between the simulation results of the prediction model and the experimental results is very small, which effectively proves the predictive ability of the UniTire cornering model considering tire temperature. This research is helpful to improve the application of UniTire model, and provide theoretical and technical support for UniTire model indoor and outdoor expansion applications

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

Figure 8

Figure 9

Figure 10

Figure 11

Figure 12

Figure 13

Figure 14

Figure 15

Figure 16

Figure 17

Figure 18

Figure 19

Figure 20

Figure 21

Figure 22

Figure 23

Figure 24

Figure 25

Figure 26

Figure 27

Figure 28

Figure 29

Figure 30

Figure 31

Figure 32

Figure 33

The full text of this article is available to read as a PDF.

Loading...

Posted 26 Jun, 2020

###### No community comments so far

Posted 26 Jun, 2020

###### No community comments so far

Based on the results of tire handling test, the cornering properties of the tire at a small range of steer angles under different temperature are obtained, and the variation law of the tire cornering characteristic parameters with the tire temperature is obtained. By establishing a tread temperature model and finite element tire model considering temperature, the mechanism of tire mechanical properties with temperature is clarified, and the expression of tread stiffness and aligning stiffness considering temperature is obtained. Then, based on the above expression and the tire brush model considering the tire temperature state, a complex brush model is established. Through the model derivation, the relationship between the temperature and the tire cornering stiffness is obtained. The relationship is used as the basic expression formula to establish the UniTire cornering model considering tire temperature. In order to verify the correctness of the model, four kinds of temperature state cornering data are used for parameter identification, and the tire cornering properties in the other two temperature states is predicted. The error between the simulation results of the prediction model and the experimental results is very small, which effectively proves the predictive ability of the UniTire cornering model considering tire temperature. This research is helpful to improve the application of UniTire model, and provide theoretical and technical support for UniTire model indoor and outdoor expansion applications

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

Figure 8

Figure 9

Figure 10

Figure 11

Figure 12

Figure 13

Figure 14

Figure 15

Figure 16

Figure 17

Figure 18

Figure 19

Figure 20

Figure 21

Figure 22

Figure 23

Figure 24

Figure 25

Figure 26

Figure 27

Figure 28

Figure 29

Figure 30

Figure 31

Figure 32

Figure 33

The full text of this article is available to read as a PDF.

Loading...