[1] Erdiwansyah, Mamat R, Sani MSM, Sudhakar K. Renewable energy in Southeast Asia: Policies and recommendations. Sci Total Environ 2019. https://doi.org/https://doi.org/10.1016/j.scitotenv.2019.03.273.
[2] Erdiwansyah, Mahidin, Mamat R, Sani MSM, Khoerunnisa F, Kadarohman A. Target and demand for renewable energy across 10 ASEAN countries by 2040. Electr J 2019;32:106670. https://doi.org/10.1016/J.TEJ.2019.106670.
[3] Murphy CA, Schleifer A, Eurek K. A taxonomy of systems that combine utility-scale renewable energy and energy storage technologies. Renew Sustain Energy Rev 2021;139:110711. https://doi.org/https://doi.org/10.1016/j.rser.2021.110711.
[4] Shahidul MI, Malcolm ML, Begum S, Hashmi MSJ, Islam MS, Eugene JJ. Renewable Energy Production From Environmental Hazardous Palm Oil Mill Waste Materials: A Review. In: Hashmi S, Choudhury IABT-E of R and SM, editors., Oxford: Elsevier; 2020, p. 902–14. https://doi.org/https://doi.org/10.1016/B978-0-12-803581-8.11564-4.
[5] Ng KH, Yuan LS, Cheng CK, Chen K, Fang C. TiO2 and ZnO photocatalytic treatment of palm oil mill effluent (POME) and feasibility of renewable energy generation: A short review. J Clean Prod 2019;233:209–25. https://doi.org/https://doi.org/10.1016/j.jclepro.2019.06.044.
[6] Ahmad A, Buang A, Bhat AH. Renewable and sustainable bioenergy production from microalgal co-cultivation with palm oil mill effluent (POME): A review. Renew Sustain Energy Rev 2016;65:214–34. https://doi.org/https://doi.org/10.1016/j.rser.2016.06.084.
[7] Mahidin, Saifullah, Erdiwansyah, Hamdani, Hisbullah, Hayati AP, et al. Analysis of power from palm oil solid waste for biomass power plants: A case study in Aceh Province. Chemosphere 2020:126714. https://doi.org/https://doi.org/10.1016/j.chemosphere.2020.126714.
[8] Tewarson A. Generation of heat and chemical compounds in fires. SFPE Handb Fire Prot Eng 2002:82–161.
[9] Ishikawa T, Kasumi K, Tanaka F, Moinuddin KAM. Combustion efficiency during fires in tunnels with natural ventilation by vitiated air including descending smoke. Fire Saf J 2020:103093.
[10] White JP, Link ED, Trouvé A, Sunderland PB, Marshall AW. A general calorimetry framework for measurement of combustion efficiency in a suppressed turbulent line fire. Fire Saf J 2017;92:164–76. https://doi.org/https://doi.org/10.1016/j.firesaf.2017.06.009.
[11] Qin L, Han J, Chen W, Yao X, Tadaaki S, Kim H. Enhanced combustion efficiency and reduced pollutant emission in a fluidized bed combustor by using porous alumina bed materials. Appl Therm Eng 2016;94:813–8. https://doi.org/https://doi.org/10.1016/j.applthermaleng.2015.10.153.
[12] Peng W, Liu Z, Motahari-Nezhad M, Banisaeed M, Shahraki S, Beheshti M. A detailed study of oxy-fuel combustion of biomass in a circulating fluidized bed (CFB) combustor: Evaluation of catalytic performance of metal nanoparticles (Al, Ni) for combustion efficiency improvement. Energy 2016;109:1139–47. https://doi.org/https://doi.org/10.1016/j.energy.2016.04.130.
[13] Permchart W, Kouprianov VI. Emission performance and combustion efficiency of a conical fluidized-bed combustor firing various biomass fuels. Bioresour Technol 2004;92:83–91. https://doi.org/https://doi.org/10.1016/j.biortech.2003.07.005.
[14] Wang D, Wang H, Xing J, Wang Y. Investigation of the thermal-hydraulic characteristics in the shell side of heat exchanger with quatrefoil perforated plate. Int J Therm Sci 2021;159:106580. https://doi.org/https://doi.org/10.1016/j.ijthermalsci.2020.106580.
[15] Mentzoni F, Kristiansen T. Two-dimensional experimental and numerical investigations of parallel perforated plates in oscillating and orbital flows. Appl Ocean Res 2020;97:102042. https://doi.org/https://doi.org/10.1016/j.apor.2019.102042.
[16] Ninduangdee P, Kuprianov VI. Combustion of Oil Palm Shells in a Fluidized-bed Combustor Using Dolomite as the Bed Material to Prevent Bed Agglomeration. Energy Procedia 2014;52:399–409. https://doi.org/https://doi.org/10.1016/j.egypro.2014.07.092.
[17] Han SH, Lee YS, Cho JR, Lee KH. Efficiency analysis of air-fuel and oxy-fuel combustion in a reheating furnace. Int J Heat Mass Transf 2018;121:1364–70. https://doi.org/https://doi.org/10.1016/j.ijheatmasstransfer.2017.12.110.
[18] Holman JP. Perpindahan Kalor (terjemahan E. Jasfi). Jakarta Penerbit Erlangga(Buku Asli 1986) 1988.
[19] Xiao G, Zeng J, Nie J. A practical method to evaluate the thermal efficiency of solar molten salt receivers. Appl Therm Eng 2021;190:116787. https://doi.org/https://doi.org/10.1016/j.applthermaleng.2021.116787.
[20] Agrawal BN, Sinha S, Kuzmin A V, Pinchuk VA. Effect of vegetable oil share on combustion characteristics and thermal efficiency of diesel engine fueled with different blends. Therm Sci Eng Prog 2019;14:100404. https://doi.org/https://doi.org/10.1016/j.tsep.2019.100404.
[21] Yu Z, Tao L, Huang L, Wang D. Numerical investigation on cooling heat transfer and flow characteristic of supercritical CO2 in spirally fluted tubes. Int J Heat Mass Transf 2020;163:120399. https://doi.org/https://doi.org/10.1016/j.ijheatmasstransfer.2020.120399.
[22] Gogoi B, Baruah DC. Steady state heat transfer modeling of solid fuel biomass stove: Part 1. Energy 2016;97:283–95. https://doi.org/https://doi.org/10.1016/j.energy.2015.12.130.
[23] Faisal M, Usman U. Analisa Perpindahan Panas Pada Tungku Rocket Tipe Silinder Berbahan Bakar Biomassa. Pros. SEMDI-UNAYA (Seminar Nas. Multi Disiplin Ilmu UNAYA), vol. 3, 2019, p. 393–401.