Insect and bacteria
Larvae of Spodoptera exigua were reared at temperature of 25 ± 2oC and relative humidity of 65 ± 5% under 16 h light and 8 h dark condition with an artificial diet [31]. Under these conditions, larvae underwent five instars (L1-L5). Adults were provided with 10% sucrose solution. For bioassays to determine bacterial pathogenicity, larvae were taken from a cohort.
Ten strains of Xenorhabdus and four strains of Photorhabdus were collected from previous stocks: [Xenorhabdus nematophila K1 (‘XnK1’) [32], X. hominickii ANU101 (‘Xh’) [16], X. ehlersii KSY (‘Xe’) [33], Photorhabdus temperata ssp. temperata ANU101 (‘Ptt’) [34], X. nematophila SK1 (‘XnSK1’) and X. nematophila SK2 (‘XnSK2’) [15], Korean Agricultural Culture Collection (KACC, RDA, Jeonju, Korea) [Photorhabdus luminescens KACC12123 (‘Pl 193’), P. luminescens subsp. laumondii KACC12283 (‘Pl laum’), P. luminescens subsp. thracensis KACC12284 (‘Pl thra’), X. nematophila KACC12145 (‘Xn12145’), X. nematophila Mexico (‘XnM’), X. nematophila France (‘XnF’), X. bovienii (‘Xb’), and X. poinarii (‘Xp’)]. These bacteria were grown in tryptic soy broth (TSB: Difco, Sparks, MD, USA) for 48 h at 28oC with shaking at 180 rpm [16,32]. Escherichia coli Top 10 was purchased from Invitrogen (Carlsbad, CA, USA) and cultured overnight in Luria-Bertani (LB) medium at 37oC with shaking at 180 rpm. For immune challenge experiment, heat killed (80oC for 10 min) E. coli were used. Their cell number was counted using a hemocytometer (Neubauer improved bright line, Cat. No. 0640010, Superior Marienfeld, Lauda-Konigshofen, Germany) under a phase contrast microscope (BX41, Olympus, Tokyo, Japan). Different bacterial concentrations were prepared through serial dilution in sterilized deionized distilled water.
Chemicals
Arachidonic acid (5,8,11,14-eicosatetraenoic acid; AA), tryptophol (TPL), indole (IND), indole-3-aceticacid hydrazide (IAAH), o-cyanobenzoic acid (CBA), 2-ethyl-1-hexanol (EH), 2-mercaptophenol (MP), and 2-mercaptobenzothiazole (MT) were purchased from Sigma-Aldrich Korea (Seoul, Korea) and dissolved in dimethyl sulfoxide (DMSO). 1,2-bis (heptanoylthio) phosphatidylcholine (PC) was used as secretory PLA2 (sPLA2) substrate while arachidonoyl thio-PC was used as cellular PLA2 (cPLA2) substrate. These substrates were purchased from Cayman Chemical (Ann Arbor, MI, USA). Benzyl alcohol (BA) and benzeneethanol-4-hydroxy (BH) were purchased from Alfa Aesar China (Shanghai, China). 3-ethoxy-4-methoxyphenol (EMP) was obtained from BOC Sciences (Shirley, NY, USA). 1-phenyl-1,2-ethanediol (PE) was bought from Acros Organics (NJ, USA). 2,5-dimethyl-4-hydroxy-3(2H)-furanone (DHF) was purchased from Tokyo Chemical Industry (Tokyo, Japan). N-(2-phenylethyl) acetamide (NPA) was kindly provided by Professor Helge Bode (Goethe University, Frankfurt, Germany). Phosphate-buffered saline (PBS, pH 7.4) was prepared with 100 mM of phosphate and 0.7% NaCl. Anticoagulant buffer (ACB, pH 4.5) was prepared with NaCl (186 mM), Na2EDTA (17 mM) and citric acid (41 mM).
Fractionation of bacterial culture broth and TLC analysis
All bacterial isolates were cultured individually in TSB (1 L) at 28°C with shaking at 180 rpm. After 48 h, bacterial pellets were separated from supernatant after centrifuging cultured broth at 10,000 × g for 20 min at 4°C. The resulting supernatant was subjected to fractionation of secondary metabolites by successively adding four different organic solvents (hexane, ethyl acetate, chloroform, and butanol) as described previously by Mollah et al. [35]. Resulting extracts were resuspended in methanol (0.4 mg/mL) and further diluted with DMSO or methanol to desired concentrations based on experimental purposes. During each fractionation step, the metabolite extraction was subjected to thin layer chromatography (TLC) by spotting it on a silica gel plate (20 × 20 cm: Merck, Darmstadt, Germany). A mixture of chloroform, methanol, and acetic acid (7:2.5:0.5, v/v) was used as an eluent. Spots in the silica gel plate were visualized and marked under a fluorescence analysis cabinet (Spectroline, CM-10, Westbury, NY, USA).
Gas chromatography coupled with mass spectrophotometer (GC-MS) analysis
GC (7890B, Agilent Technologies, Santa Clara, CA, USA) equipped with MS (5977A
Network, Agilent Technologies) was used for the prediction of the bacterial extracts in the methanol resuspension. It was performed as described by Mollah et al. [35]. An HP 5 MS column (non-polar column, Agilent Technologies) was used for GC. Helium was used as carrier gas at a flow rate of 1 mL/min. Split mode of injection with split ratio 10:1 was followed at 200oC. The initial temperature was 100oC for 3 min. It was raised to 300oC at 5oC/min. The oven temperature was maintained at 300oC for 10 min. For recording mass spectra, EI mode at 70 eV with a scanning range of 33-550 m/z was used. Mass spectra were used for identification of purified samples using NIST11 database (U.S. Department of Commerce, Gaithersburg, MD, USA) and literature data (http://nistmassspeclibrary.com).
Hemocyte-spreading behavior assay
Hemolymph (~250 µL) was collected from L5 larvae of S. exigua by cutting prolegs. It was mixed with 750 µL ACB. The hemolymph suspension was centrifuged at 800 × g for 5 min and 800 µL supernatant was mixed with filter-sterilized 200 µL TC100 insect culture medium (Hyclone, Daegu, Korea). This hemocyte suspension (9 µL) and each bacterial metabolite (1 µL) were mounted on a glass slide to assess hemocyte-spreading behavior. For rescue experiment with AA (10 µg/µL in DMSO), 8 µL of cell suspension, 1 µL of bacterial metabolite, and 1 µL of AA were placed on a glass slide. After incubating the mixture at room temperature under darkness for 40 min, hemocytes were observed under a phase contrast microscope (Olympus) at 800 × magnification. As control, the dilution solvent (DMSO) of metabolites was used. Spread hemocytes were recognized based on cytoplasmic extension out of cell boundary. Each treatment was replicated three times with separately prepared suspension mixture. In each replication, 100 hemocytes were randomly chosen to assess hemocyte-spreading behavior.
Nodulation assay
Hemocyte nodule formation was observed using three days old L5 larvae of S. exigua after injecting 3 µL of overnight grown E. coli Top 10 (104 cells/larva) and 2 µL of DMSO to the hemocoel through prolegs using a microsyringe (Hamilton, Reno, NV, USA). To assess any inhibitory effect of bacterial extracts or secondary metabolites, 1 µL (1 µg/µL in DMSO) of test sample was co-injected with 3 µL of E. coli and 1 µL of DMSO. For AA rescue experiment, 1 µL of AA (10 µg/µL in DMSO) was co-injected with 1 µL of bacterial metabolite and 3 µL of E. coli. After incubation at 25oC for 8 h, injected larvae were dissected to count melanized nodules under a stereomicroscope (Stemi SV11, Zeiss, Jena, Germany) at 50 × magnification. Each treatment was replicated three times using five larvae per replication.
PLA2 enzyme assay
PLA2 activity was assessed using processes previously described by Vatanparast et al. [36]. Briefly, enzymes were extracted after grinding hemocytes of L5 larvae of S. exigua with PBS followed by centrifugation at 12,500 ´ g for 5 min. The resulting supernatant containing the cytosol and membrane mixture was used as enzyme source. The reaction mixture (225 μL) contained 10 μL of PLA2 enzyme, 10 μL of Ellman’s reagent (5,5-di-thio-bis-(2-nitrobenzoicacid)), 5 μL of test inhibitor, and 200 μL of sPLA2 or cPLA2 substrate. DMSO was used instead of test inhibitor as control. Change in absorbance of reaction product was measured at wavelength of 405 nm using a microplate reader (Victor, PerkinElmer, Waltham, MA, USA). Each treatment was replicated three times with biologically independent samples.
Bacterial pathogenicity test
To determine insecticidal activities of 14 bacterial isolates, bacterial cells after 24 h of culture were centrifuged at 10,000 × g for 2 min at 4°C. Cell pellet was re-suspended in PBS for injection. Bacterial suspension was diluted with PBS to obtain different concentrations (0, 101, 102, 103, 104, 105 and 106 colony-forming unit (cfu)/larva) and injected to hemocoel of L5 S. exigua larvae using a microsyringe. Before injection, larvae were surface sterilized with 70% ethanol. Bacterial dose was measured after plating the suspension onto LB agar medium followed by culturing at 28oC for 48 h. Mortality was counted at 24 h after bacterial injection. As control bacterial treatment, E. coli was used. Injected larvae were incubated at room temperature with sufficient diet. Larvae were considered to be dead if there was no movement upon touching. Each treatment consisted of three replications using 10 larvae for each replication.
Toxicity tests of bacterial metabolites and synthetic compounds
To determine toxicities of bacterial extracts and predicted metabolites, hemocoelic injection was performed. Dried bacterial extracts and metabolites were weighed and dissolved in DMSO to prepare different concentrations (0.001, 0.01, 0.1, 1 and 10 µg/µL) for toxicity assays. A 10 μL microsyringe was used for hemocoelic injection. Each test sample (3 μL) was injected to L5 larvae of S. exigua. DMSO was injected as control. Treated larvae were placed in 9 cm diameter dishes and incubated at room temperature. Mortality was determined every 24 h for 96 h after treatment. Larvae were considered as dead if there was no movement upon touching. Each test concentration was replicated three times using 10 larvae per replication.
Statistical analysis
All assay data for continuous variables were subjected to one-way analysis of variance (ANOVA) using PROG GLM in SAS program [37]. For ANOVA, mortality data were subjected to arcsine transformation. Means were compared with the least significant difference (LSD) test at 0.05 level of Type I error. Median lethal dose (LD50) was calculated using EPA Probit Analysis Program, ver. 1.5 (U.S. Environmental Protection Agency, Washington, D.C., USA).