[1] R. I. Acosta, K. C. Gross, G. P. Perram, Thermal degradation of poly(methylmethacrylate) with a 1.064 µm Nd:YAG laser in a buoyant flow. Polym. Degrad. Stab. 121, 78-89 (2015).
[2] G. Moad, D.H. Solomon, The chemistry of radical polymerization, 2nd edn. (Elsevier Ltd., 2006).
[3] E. Cao, Z. Tan, S. Sun, Z. Liu, H. Zhang. Enhancing the thermal stability of poly(methyl methacrylate) by removing the chains with weak links in a continuous polymerization. Polym. Degrad. Stab. 96, 2209-2214 (2011).
[4] N. Patra, M. Salerno, M. Malerba, P. D. Cozzoli, A. Athanassiou. Improvement of thermal stability of poly(methyl methacrylate) by incorporation of colloidal TiO2 nanorods. Polym. Degrad. Stab. 96, 1377-1381 (2011).
[5] E.H. El-Mosallamy. Enhancing the thermal and mechanical parameters of PMMA using zinc diphenylcarbazone complex as the initiator. J. Therm. Anal. Calorim. 115, 707-711 (2014).
[6] International Association for Research on Cancer (IARC). IARC monographs on the evaluation of the carcinogenic risk of chemicals to humans, Vol. 19, (France, Lyon, 1979), pp. 187- 194.
[7] O. P. Gautschi, C. L. Schlett, J.-Y. Fournier, D. Cadosch. Laboratory confirmed polymethyl-methacrylate (Palacos®)-hypersensitivity after cranioplasty. Clin Neurol Neurosurg. 112, 915-916 (2010).
[8] I. Kim, J.-M. Hwang, J. K. Lee, C. S. Ha, S. I. Woo. Polymerization of methyl methacrylate with Ni(II)a-Diimine/MAO and Fe(II) and Co(II) pyridyl bis(imine)/MAO. Macromol. Rapid. Commun. 24, 508–511 (2003).
[9] C. E. Housecroft, A. G. Sharpe, Inorganic Chemistry, 3rd edn. (Prentice Hall, 2008).
[10] R. G. Compoton, Comprehensive chemical kinetics mechanism and kinetics of addition polymerizations. Vol. 31, eds.: M. Kucera, (Elsiever, Amsterdam, 1992) pp. 109-112.
[11] Y. Song, D. Kim, H. -J. Lee, H. Lee. Synthesis and structural characterization of [(dpca)MX2] (M = Cu, X = Cl; M = Cd, X = Br and M = Zn, X = NO3) complexes containing N,N-di(2-picolyl)cyclohexylamine (dpca) and their application to methyl methacrylate polymerization. Inorg. Chem. Commun. 45, 66-70 (2014).
[12] S. Shin, S. H. Ahn, M. J. Jung, S. Nayab, H. Lee. Synthesis, structure and methyl methacrylate polymerization of cobalt(II), zinc(II) and cadmium(II) complexes with N,N′,N-bidentate versus N,N′,N-tridentate N,N′,N-bis((1Hpyrazol-1-yl)methyl)amines. J. Coord. Chem. 69, 2391-2402 (2016).
[13] S. H. Ahn, J. Shin, S. Nayab, H. Lee. Polymerization of methyl methacrylate catalyzed by Co(ii), Cu(ii), and Zn(ii) complexes bearing N‐methyl‐N‐((pyridin‐2‐yl)methyl) cyclohexanamine. Bull. Korean Chem. Soc. 37, 763-766 (2016).
[14] Y. Song, D. Kim, H.-J. Lee, H. Lee. Cd(II) and Zn(II) Complexes containing N,N'-bidentate N-(pyridin-2-ylmethylene) cyclopentanamine: synthesis, characterisation and methyl methacrylate polymerisation. Bull. Korean Chem. Soc. 35, 2929-2934 (2014).
[15] S. Park, J. Lee, H. Lee, A. R. Jeong, K. S. Min, S. Nayab. Five‐coordinate dinuclar cobalt (II), copper (II), zinc (II) and cadmium (II) complexes with 4‐bromo‐N‐(2‐pyridinylmethylene) benzenamine: Synthesis, characterisation and methyl methacrylate polymerization. Appl. Organometal Chem. 33, e4766 (2019).
[16] H. Cho, M. J. Jung, J. Jeon, H. Lee, S. Nayab. Synthesis, structural characterization and MMA polymerization studies of dimeric 5-coordinate copper(II), cadmium(II), and monomeric 4-coordinate zinc(II) complexes supported by N-methyl-N-((pyridine-2-yl)methyl) benzeneamine. Inorganica Chimica Acta. 487, 221–227 (2019).
[17] L. J. Gibson, M.F. Ashby, Cellularsolids structure and properties, 2nd edn. (Cambridge University Press: Cambridge, 1997).
[18] J. Brandrup, E. H. Immergut. Polymer Handbook, eds. E. A. Grulke, 4th edn. (Wiley: New York 1999).
[19] E.H. El-Mosallamy, Prospective influence of catalytic chain transfer polymerization of methyl methacrylate via metal carbazone complexes. Macromol. Indian J. 9, 1-7 (2013).
[20] D. C. Bebout. Mercury, In Inorganic & Coordination Chemistry, Encyclopedia of Inorganic Chemistry. John Wiley & Sons: New Jersey. 2006.
[21] M. Nishizawa, H. Imagawa, H. Yamamoto. A new catalyst for organic synthesis: mercuric triflate.Org. Biomol. Chem. 8, 511-521 (2010).
[22] M. Eckert, G. Fleschmann, R. Jira, H. M. Bolt, K. Golka. In Ullmann’s Encyclopedia of Industrial Chemistry (VCH: Weinheim, 2006) pp. 191-207.
[23] H. Yamamoto, I. Sasaki, Y. Hirai, K. Namba, H. Imagawa. M. Nishizawa, Silaphenylmercuric triflate catalyzed reactions: synthesis of a solid supported salt catalyst. Angew. Chem. Int. Ed. 48, 1244-1247 (2009).
[24] T. W. Clarkson, L. Magos, G. J. Myers. N. Engl. The toxicology of mercury–Current exposures and clinical manifestations. J. Med. 349, 1731–1737 (2003).
[25] R. A. Bernhoft, Mercury toxicity and treatment: A review of the literature, J. Environ. Public Health., 2012, article ID 460508 (2012). https://doi.org/10.1155/2012/460508.
[26] C.S. Chen, Prog. Emulsion polymerization mechanisms. Polym. Sci. 31, 443-486 (2006).
[27] K. H. Slotta, K. R. Jacobi. Herstellung organischer Reagenzien im analytischen Laboratorium. I. Diphenyl-carbazid und Diphenyl-carbazon. Anal. Chem. 77, 344-348 (1929).
[28] a) P. Krumholz, E. Krumholz. Zur Kenntnis des Diphenylcarbazons. Monatsh 70, 431-436 (1937); b) J.J.R.F. Da Silva, J.C.G. Calado, M.L. De Moura. Separation of commercial diphenylcarbazone into its components. Talanta 11, 983-984 (1964).
[29] S. Balt, E. Van Dalen. The reaction of diphenylcarbazide and dipenylcarbazone with cations. Part III. Nature and Properties of the mercury complexes. Anal. Chim. Acta 27, 416-421 (1962).
[30] S. Balt, E. Van Dalen. The reaction of diphenylcarbazide and dipenylcarbazone with cations. Part IV. Cations of Mn, Fe, Co, Ni, Cu, Zn, Cd, Sn and Pb. Anal. Chim. Acta 27, 466-471 (1962).
[31] H. M. V. Swamy, S. B. Sajjanar, A. H. M. Siddalingaiah. Studies on some lanthanide (III) complexes of o-, m- and p-chloro substituted diphenylcarbazones. Indian J. Chem. A 39, 1150-1156 (2000).
[32] R. T. Pflaum, L. C. Howick. The Chromium-diphenylcarbazide reaction. Am. Chem. Soc. 78, 4862–4866 (1956).
[33] H. Wang, B. Chen, M. He, X. Yu, B. Hu. Selenocystine against methyl mercury cytotoxicity in Hep G2 cells. Sci. Rep.7: 147, 1-8 (2017). https://doi.org/10.1038/s41598-017-00231-7
[34] L. Z. Linan, N. M. N. Lima, C. Benatti, M. Xavier, A. A. Rodrigues, F. Manenti, A. Jardini, R. M. Filho, R. Gilioli. Cytotoxicity assessment of a poly(methyl methacrylate) synthesized for the direct fabrication of bone tissues. Braz. Arch. Biol. Technol. 61, e18160526 (2018).
[35] a) J. C.; Stockert, A.; Blázquez-Castro, M. Cañete, R. W. Horobin, A. Villanueva. MTT assay for cell viability: Intracellular localization of the formazan product is in lipid droplets". Acta Histochemica. Acta Histochemica. 114, 785–96 (2012); b) T. Mosmann, Rapid colorimetric assay for cellular growth and survival: application to proliferation and cytotoxicity assays. J. Immunol. Methods 65, 55–63 (1983).
[36] P. E. Feuser, P. C. Gaspar, E. Ricci-Júnior, M. C. S. da Silva, M. Nele, C. Sayer, P. H. H. de Araújo. Synthesis and characterization of poly(methyl methacrylate) PMMA and evaluation of cytotoxicity for biomedical application. Macromol. Symp. 343, 65-69 (2014).
[37] G. Zhang, J. Zhang, F. Wang, H. Li. Thermal decomposition and kinetics studies on the poly (2,2-dinitropropyl acrylate) and 2,2-dinitropropyl acrylate-2,2-dinitrobutyl acrylate copolymer. J. Therm. Anal. Calorim. 122, 419-426 (2015).
[38] G. Choong, D. De Focatiis. A method for the determination and correction of the effect of thermal degradation on the viscoelastic properties of degradable polymers. Polym. Degrad. Stab. 130 182-188 (2016).
[39] W. G. Osiris, M. T. H. Moselhey. Thermal and structure studies of poly(vinyl alcohol) and hydroxypropyl cellulose blends. Nat. Sci. 4, 272-280 (2012).
[40] C. C. Wei, D. Esposito, K. Tauer. Thermal and structure studies of poly(vinyl alcohol) and hydroxypropyl cellulose blends. Thermal properties of thermoplastic polymers: Influence of polymer structure and procedure of radical polymerization. Polym. Degrad. Stab. 131, (2016) 157-168.
[41] J. Guan, C. Guoqiang. Copolymerization modification of silk fabric with organo phosphorous flame retardant. Fire Mater. 37, 261-270 (2009).
[42] N. A. El-Zaher, M. A. Melegy, O.W. Guirguis. Thermal and structure analyses of PMMA/TiO2 nanoparticles composites. Nat. Sci. 6, 859-870 (2014).
[43] Z. Dobkowski, E. Rudnik, Lifetime prediction for polymers via the temperature of initial decomposition, part 2. J. Therm. Anal. Calorim. 69, 693-697 (2002).
[44] W. G. Osiris, S. M. Mohamed, N. A. El-Zaher. Macrostructure and optical study of PMMA/TiO2 nanoparticles composites. NSNTAIJ. 7, 60-65 (2013).
[45] S. M. Sayyah, A. B. Khaliel, H. M. Abd El-Salam. Molecular weight studies of the g-radiation degradation of poly(methyl methacrylate) doped with poly(p-sulfanilamide). J. Appl. Polym. Sci. 106, 1294 -1300 (2007).
[46] J. Li, R. A. Shanks, Y. Long. Mechanical properties and morphology of polyethylene–polypropylene blends with controlled thermal history. J. Appl. Polym. Sci. 76, 1151-1164 (2000).
[47] L. Klapiszewski, K. Bula, M. Sobczak, T. Jesionowski. Influence of processing conditions on the thermal stability and mechanical properties of PP/silica-lignin composites. Int. J. Polym. Sci. 2016, 1–12 (2016).
[48] N. Dunne, J. Clements, J-S. Wang, Acrylic cements for bone fixation. In Joint Replacement Technology, eds. P. A. Revell, 2nd edn. (Woodhead: Cambridge, UK, 2014) pp. 212-256.
[49] S. Samavedi, L. K. Poindexter, M. Van Dyke, A. S. Goldstein, Chapter 7 - Synthetic biomaterials for regenerative medicine applications, In Regenerative Medicine Applications in Organ Transplantation, eds. G. Orlando, J. Lerut, S. Soker, R. J. Stratta, (Academic Press, Elsiever, Amsterdam, 2014) pp. 81-99.
[50] M. Mahmoudian, A. P. Marjani, R. Hasanzadeh, M. Moradian, S. M. Shishavan. Optimization of mechanical properties of in situ polymerized poly(methyl methacrylate)/alumina nanoparticles nanocomposites using Taguchi approach. Polym. Bull. 77, 2837-2854 (2020).
[51] Massachusetts Institute of Technology Home Page (www.mit.edu). http://www.mit.edu/~6.777/matprops/pmma.htm (accessed May 14, 2021).
[52] P. Krishnaiah, C. T. Ratnam, S. Manickam. Enhancements in crystallinity, thermal stability, tensile modulus and strength of sisal fibers and their PP composites induced by the synergistic effects of alkali and high intensity ultrasound (HIU) treatments. Ultrason. Sonochem. 34, 729-742 (2017).