[1] T. M. Razykov, C. S. Ferekides, D. Morel, E. Stefanakos, H. S. Ullal, and H. M. Upadhyaya, “Solar photovoltaic electricity: Current status and future prospects,” Sol. Energy, vol. 85, no. 8, pp. 1580–1608, 2011, doi: 10.1016/j.solener.2010.12.002.
[2] M. Berginski et al., “Experimental studies and limitations of the light trapping and optical losses in microcrystalline silicon solar cells,” Sol. Energy Mater. Sol. Cells, vol. 92, no. 9, pp. 1037–1042, 2008, doi: 10.1016/j.solmat.2008.03.005.
[3] L. L. Ma et al., “Wide-band ‘black silicon’ based on porous silicon,” Appl. Phys. Lett., vol. 88, no. 17, 2006, doi: 10.1063/1.2199593.
[4] S. H. Zaidi, J. M. Gee, and D. S. Ruby, “Diffraction grating structures in solar cells,” Conf. Rec. IEEE Photovolt. Spec. Conf., vol. 2000-Janua, pp. 395–398, 2000, doi: 10.1109/PVSC.2000.915850.
[5] M. K. Basher, M. K. Hossain, and M. A. R. Akand, “Effect of surface texturization on minority carrier lifetime and photovoltaic performance of monocrystalline silicon solar cell,” Optik (Stuttg)., vol. 176, no. July 2018, pp. 93–101, 2019, doi: 10.1016/j.ijleo.2018.09.042.
[6] J. Cichoszewski, M. Reuter, and J. H. Werner, “+0.4% Efficiency gain by novel texture for String Ribbon solar cells,” Sol. Energy Mater. Sol. Cells, vol. 101, pp. 1–4, 2012, doi: 10.1016/j.solmat.2012.01.031.
[7] M. Moreno et al., “A comparative study of wet and dry texturing processes of c-Si wafers for the fabrication of solar cells,” Sol. Energy, vol. 101, pp. 182–191, 2014, doi: 10.1016/j.solener.2014.01.004.
[8] A. Bougoffa, A. Trabelsi, A. Zouari, and E. Dhahri, “Analytical model of front texturization effect on silicon solar cell with porous silicon at the backside,” Opt. Quantum Electron., vol. 49, no. 1, pp. 1–13, 2017, doi: 10.1007/s11082-016-0864-8.
[9] M. K. Basher, M. K. Hossain, M. J. Uddin, M. A. R. Akand, and K. M. Shorowordi, “Effect of pyramidal texturization on the optical surface reflectance of monocrystalline photovoltaic silicon wafers,” Optik (Stuttg)., vol. 172, pp. 801–811, 2018, doi: 10.1016/j.ijleo.2018.07.116.
[10] E. Y. Plotnikova, A. V Arsentiev, and M. E. Harchenko, “Textured solar cell modeling in TCAD,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1035, no. 1, p. 012002, 2021, doi: 10.1088/1757-899x/1035/1/012002.
[11] C. Jin, I. Martín, P. R. Ortega, E. Calle, and R. Alcubilla, “3D simulations of interdigitated back-contacted crystalline silicon solar cells on thin substrates,” Sol. Energy, vol. 167, no. January, pp. 242–250, 2018, doi: 10.1016/j.solener.2018.04.022.
[12] S. Ma et al., “A theoretical study on the optical properties of black silicon,” AIP Adv., vol. 8, no. 3, 2018, doi: 10.1063/1.5018642.
[13] D. Pera, G. Gaspar, K. Lobato, and I. Costa, “COMPUTATIONAL OPTICAL ANALYSIS OF 3D MODELED CRYSTALLINE,” no. November, pp. 2–5, 2020, doi: 10.4229/EUPVSEC20202020-2CV.1.16.
[14] D. K. Shah, J. Choi, D. Kc, M. S. Akhtar, C. Y. Kim, and O. B. Yang, “Refined optoelectronic properties of silicon nanowires for improving photovoltaic properties of crystalline solar cells: a simulation study,” J. Mater. Sci. Mater. Electron., no. February, 2021, doi: 10.1007/s10854-020-05031-w.
[15] H. D. Omar, M. R. Hashim, and M. Z. Pakhuruddin, “Ray tracing of inverted pyramids for light-trapping in thin crystalline silicon for solar cells,” Optik (Stuttg)., vol. 219, no. July, p. 165279, 2020, doi: 10.1016/j.ijleo.2020.165279.
[16] P. A. Basore, “PC3S.” 2020.
[17] Z. Mrazkova, I. P. Sobkowicz, and M. Foldyna, “Optical properties and performance of pyramidal texture silicon heterojunction solar cells : Key role of vertex angles,” no. January, pp. 1–8, 2018, doi: 10.1002/pip.2994.
[18] K. R. M. Simeon C. Baker-Finch, “Reflection distributions of textured monocrystalline silicon- Implications for silicon solar cells,” Prog. PHOTOVOLTAICS Res. Appl., vol. 20, no. 6, pp. 1114–1129, 2012, doi: 10.1002/pip.
[19] G. Hashmi, A. R. Akand, M. Hoq, and H. Rahman, “Study of the Enhancement of the Efficiency of the Monocrystalline Silicon Solar Cell by Optimizing Effective Parameters Using PC1D Simulation,” Silicon, vol. 10, no. 4, pp. 1653–1660, 2018, doi: 10.1007/s12633-017-9649-3.
[20] M. Ju et al., “Influence of small size pyramid texturing on contact shading loss and performance analysis of Ag-screen printed mono crystalline silicon solar cells,” Mater. Sci. Semicond. Process., vol. 85, no. April, pp. 68–75, 2018, doi: 10.1016/j.mssp.2018.05.039.
[21] J. Zhao, A. Wang, P. P. Altermatt, S. R. Wenham, and M. A. Green, “24% Efficient perl silicon solar cell: Recent improvements in high efficiency silicon cell research,” Sol. Energy Mater. Sol. Cells, vol. 41–42, pp. 87–99, 1996, doi: 10.1016/0927-0248(95)00117-4.
[22] K. Forberich, G. Dennler, M. C. Scharber, K. Hingerl, T. Fromherz, and C. J. Brabec, “Performance improvement of organic solar cells with moth eye anti-reflection coating,” Thin Solid Films, vol. 516, no. 20, pp. 7167–7170, 2008, doi: 10.1016/j.tsf.2007.12.088.
[23] J. Schmidt, R. Peibst, and R. Brendel, “Surface passivation of crystalline silicon solar cells: Present and future,” Sol. Energy Mater. Sol. Cells, vol. 187, pp. 39–54, 2018, doi: 10.1016/j.solmat.2018.06.047.
[24] Y. L. Chen, G. L. Lu, S. H. Zhong, and W. Z. Shen, “SiO2 Passivation Layer Grown by Liquid Phase Deposition for N-type Bifacial Silicon Solar Cells,” MATEC Web Conf., vol. 67, 2016, doi: 10.1051/matecconf/20166704008.
[25] T. Jana, S. Mukhopadhyay, and S. Ray, “Low temperature silicon oxide and nitride for surface passivation of silicon solar cells,” Sol. Energy Mater. Sol. Cells, vol. 71, no. 2, pp. 197–211, 2002, doi: 10.1016/S0927-0248(01)00058-7.
[26] S. MacK et al., “Properties of purified direct steam grown silicon thermal oxides,” Sol. Energy Mater. Sol. Cells, vol. 95, no. 9, pp. 2570–2575, 2011, doi: 10.1016/j.solmat.2011.03.002.
[27] S. MacK et al., “Silicon surface passivation by thin thermal oxide/PECVD layer stack systems,” IEEE J. Photovoltaics, vol. 1, no. 2, pp. 135–145, 2011, doi: 10.1109/JPHOTOV.2011.2173299.
[28] N. M. Terlinden, G. Dingemans, V. Vandalon, R. H. E. C. Bosch, and W. M. M. Kessels, “Influence of the SiO2 interlayer thickness on the density and polarity of charges in Si/SiO2/Al2O3 stacks as studied by optical second-harmonic generation,” J. Appl. Phys., vol. 115, no. 3, 2014, doi: 10.1063/1.4857075.
[29] U. Wurfel, A. Cuevas, and P. Wurfel, “Charge carrier separation in solar cells,” IEEE J. Photovoltaics, vol. 5, no. 1, pp. 461–469, 2015, doi: 10.1109/JPHOTOV.2014.2363550.
[30] M. Faye, C. Mbow, and B. Ba, “Internal Electric Field In The Space Charge Layer Of A Solar Cell Based On Silicon In The Presence Of Excitons,” Int. J. Sci. Technol. Res., vol. 4, no. 10, pp. 66–69, 2015.
[31] C. T. Lee, K. F. Lu, and C. Y. Tseng, “Carrier drift velocity balance mechanism in Si-based thin film solar cells using graded microcrystalline SiGe absorption layer,” Sol. Energy, vol. 114, pp. 1–7, 2015, doi: 10.1016/j.solener.2015.01.023.
[32] A. Belghachi, “Detailed analysis of surface recombination in crystalline silicon solar cells,” Proc. 2013 Int. Renew. Sustain. Energy Conf. IRSEC 2013, pp. 161–166, 2013, doi: 10.1109/IRSEC.2013.6529729.
[33] J. Wang, W. Fu, S. Jariwala, I. Sinha, A. K. Y. Jen, and D. S. Ginger, “Reducing Surface Recombination Velocities at the Electrical Contacts Will Improve Perovskite Photovoltaics,” ACS Energy Lett., vol. 4, no. 1, pp. 222–227, 2019, doi: 10.1021/acsenergylett.8b02058.