[1] Y. Deng, Z. Yang, and G. Zhang, “Nanostructure characteristics of Al3Sc1-xZrx nanoparticles and their effects on mechanical property and SCC behavior of Al-Zn-Mg alloys”, Materials, vol. 13, p. 1909, 2020.
[2] B. Li, H. Wang, J. Jie, and Z. Wei, “Effects of yttrium and heat treatment on the microstructure and tensile properties of Al-7.5Si-0.5Mg alloy,” Mater. Des., vol. 32, no. 3, pp. 1617–1622, 2011.
[3] B. Li, H. Wang, J. Jie, and Z. Wei, “Microstructure evolution and modification mechanism of the ytterbium modified Al-7.5%Si-0.45%Mg alloys,” J. Alloys Compd., vol. 509, no. 7, pp. 3387–3392, 2011.
[4] T. V Atamanenko, D. G. Eskin, L. Zhang, and L. Katgerman, “Criteria of Grain Refinement Induced by Ultrasonic Melt Treatment of Aluminum Alloys Containing Zr and Ti,” 2010.
[5] E. A. Marquis and D. N. Seidman, “Nanoscale structural evolution of Al 3 Sc precipitates in Al(Sc) alloys,” Acta Mater., vol. 49, no. 11, pp. 1909–1919, 2001.
[6] J. Royset, “Scandium in Aluminium alloys overview: Physical Metallurgy, Properties and applications,” Metall. Sci. andTechnology, vol. 25, no. 2, pp. 11–21, 2007.
[7] T. Ponomareva, M. Ponomarev, A. Kisarev, and M. Ivanov, “Wire arc additive manufacturing of Al-Mg alloy with the addition of scandium and zirconium”, Materials, Vol. 14, p. 3665, 2021.
[8] S. Iwamura and Y. Miura, “Loss in coherency and coarsening behavior of Al3Sc precipitates,” Acta Mater., vol. 52, no. 3, pp. 591–600, 2004.
[9] Y. Tao, Z. Zhang, D. R. Ni, D. Wang, B. L. Xiao, and Z. Y. Ma, “Influence of welding parameter on mechanical properties and fracture behavior of friction stir welded Al-Mg-Sc joints,” Mater. Sci. Eng. A, vol. 612, pp. 236–245, 2014.
[10] P. A. Rometsch, H. Zhong, K. M. Nairn, T. Jarvis, and X. Wu, “Characterization of a laser-fabricated hypereutectic Al–Sc alloy bar,” Scr. Mater., vol. 87, pp. 13–16, 2014.
[11] E. P. Degarmo, J T. Black, and R. a Kohser, “Materials and Process in Manufactoring,” Mater. Process Manuf., p. 383, 2003.
[12] M. Vasheghani Farahani, E. Emadoddin, M. Emamy, and A. Honarbakhsh Raouf, “Effect of grain refinement on mechanical properties and sliding wear resistance of extruded Sc-free 7042 aluminum alloy,” Mater. Des., vol. 54, pp. 361–367, Feb. 2014.
[13] Y. Deng et al., “Corrosion behaviour and mechanism of new aerospace Al-Zn-Mg alloy friction stir welded joints and the effects of secondary Al3ScxZr1-x nanoparticles,” Corros. Sci., vol. 90, pp. 359–374, 2015.
[14] J. Hirsch, “Recent development in aluminium for automotive applications,” Trans. Nonferrous Met. Soc. China (English Ed., vol. 24, no. 7, pp. 1995–2002, 2014.
[15] P. Vijaya Kumar, G. Madhusudhan Reddy, and K. Srinivasa Rao, “Microstructure and pitting corrosion of armor grade AA7075 aluminum alloy friction stir weld nugget zone – Effect of post weld heat treatment and addition of boron carbide,” Def. Technol., vol. 11, no. 2, pp. 166–173, 2015.
[16] J. Lu, Y. Song, L. Hua, K. Zheng, and D. Dai, “Thermal deformation behavior and processing maps of 7075 aluminum alloy sheet based on isothermal uniaxial tensile tests,” J. Alloys Compd., vol. 767, pp. 856–869, 2018.
[17] A. Ghosh and M. Ghosh, “Microstructure and texture development of 7075 alloy during homogenisation,” Philos. Mag., vol. 6435, pp. 1–21, 2018.
[18] Y. F. Mo et al., “Fabrication of 7075-0.25Sc-0.15Zr Alloy with Excellent Damping and Mechanical Properties by FSP and T6 Treatment,” pp. 2–7, 2018.
[19] X. Peng, Y. Li, G. Xu, J. Huang, and Z. Yin, “Effect of Precipitate State on Mechanical Properties , Corrosion Behavior , and Microstructures of Al – Zn – Mg – Cu Alloy,” Met. Mater. Int., no. 0123456789, 2018.
[20] J. Waldman, H. Sulinski, and H. Markus, “Effect of ingot processing treatments on the grain size and properties of Al alloy 7075.,” Met. Trans, vol. 5, no. 3, pp. 573–584, 1974.
[21] J. A. Wert, N. E. Paton, C. H. Hamilton, and M. W. Mahoney, “Grain Refinement in 7075 Aluminum By Thermomechanical Processing.,” Metall. Trans. A, Phys. Metall. Mater. Sci., vol. 12 A, no. 7, pp. 1267–1276, 1981.
[22] J. D. Robson, D. T. Henry, and B. Davis, “Particle effects on recrystallization in magnesium-manganese alloys: Particle pinning,” Mater. Sci. Eng. A, vol. 528, no. 12, pp. 4239–4247, 2011.
[23] A. Gholinia, F. J. Humphreys, and P. B. Prangnell, “Production of ultra-fine grain microstructures in Al-Mg alloys by coventional rolling,” Acta Mater., vol. 50, no. 18, pp. 4461–4476, 2002.
[24] E. Di Russo, M. Conserva, F. Gatto, and H. Markus, “Thermomechanical treatments on high strength Al-Zn-Mg(-Cu) alloys,” Metall. Trans., vol. 4, no. 4, pp. 1133–1144, 1973.
[25] Y. Lang, H. Cui, Y. Cai, and J. Zhang, “Effect of strain-modified particles on the formation of fined grains and the properties of AA7050 alloy,” Mater. Des., vol. 39, pp. 220–225, 2012.
[26] J. Røyset and N. Ryum, “Scandium in aluminium alloys,” vol. 50, no. 1, pp. 19–44, 2005.
[27] G. Li et al., “Effect of Sc/Zr ratio on the microstructure and mechanical properties of new type of Al-Zn-Mg-Sc-Zr alloys,” Mater. Sci. Eng. A, vol. 617, 2014.
[28] J. C. Williams and E. A. Starke, “Progress in structural materials for aerospace systems11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh.,” Acta Mater., vol. 51, no. 19, pp. 5775–5799, Nov. 2003.
[29] T. Dursun and C. Soutis, “Recent developments in advanced aircraft aluminium alloys,” Mater. Des., vol. 56, pp. 862–871, 2014.
[30] K. Turba, P. Málek, and M. Cieslar, “Superplasticity in a Zr and Sc modified AA7075 aluminium alloy produced by ECAP,” Kov. Mater., vol. 45, no. 3, pp. 165–170, 2007.
[31] Y. Kaushik, A Review on use of Aluminium Alloys in Aircraft Components, vol. 3. 2015.
[32] M. Tiryakioglu and J. Campbell, Quality Index for Aluminum Alloy Castings, vol. 8. 2014.
[33] E. Czekaj, J. Zych, Z. Kwak, and A. Garbacz-Klempka, “Quality Index of the AlSi7Mg0.3 Aluminium Casting Alloy Depending on the Heat Treatment Parameters,” Arch. Foundry Eng., vol. 16, no. 3, pp. 25–28, 2016.
[34] E. R. Wang, X. D. Hui, S. S. Wang, Y. F. Zhao, and G. L. Chen, “Improved mechanical properties in cast Al-Si alloys by combined alloying of Fe and Cu,” Mater. Sci. Eng. A, vol. 527, no. 29–30, pp. 7878–7884, 2010.
[35] A. E8-2016, “Standard Test Methods for Tension Testing of Metallic Materials.”
[36] Y. H. Zhao, X. Z. Liao, S. Cheng, E. Ma, and Y. T. Zhu, “Simultaneously increasing the ductility and strength of nanostructured alloys,” Adv. Mater., vol. 18, no. 17, pp. 2280–2283, 2006.
[37] S. R. Koteswara Rao, B. Kamsala Devi, K. Sreenivasa Rao, and K. Prasad Rao, “Thermo-mechanical treatments of Sc- and Mg-modified Al-Cu alloy welds,” Int. J. Adv. Manuf. Technol., vol. 45, no. 1–2, pp. 16–24, 2009.
[38] V. G. Davydov, T. D. Rostova, V. V Zakharov, Y. A. Filatov, and V. I. Yelagin, “Scientific principles of making an alloying addition of scandium to aluminium alloys,” vol. 280, pp. 30–36, 2000.
[39] G. Peng, K. Chen, S. Chen, and H. Fang, “Evolution of the second phase particles during the heating-up process of solution treatment of Al-Zn-Mg-Cu alloy,” Mater. Sci. Eng. A, vol. 641, pp. 237–241, 2015.
[40] T. Liu, C. nian He, G. Li, X. Meng, C. sheng Shi, and N. qin Zhao, “Microstructural evolution in Al-Zn-Mg-Cu-Sc-Zr alloys during short-time homogenization,” Int. J. Miner. Metall. Mater., vol. 22, no. 5, pp. 516–523, 2015.
[41] Z. Zhao, J. Cui, J. Dong, and B. Zhang, “Effect of low-frequency magnetic field on microstructures and macrosegregation of horizontal direct chill casting 7075 aluminum alloy,” J. Mater. Process. Technol., vol. 182, no. 1, pp. 185–190, 2007.
[42] Y. H. Zhao, X. Z. Liao, Z. Jin, R. Z. Valiev, and Y. T. Zhu, “Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing,” Acta Mater., vol. 52, no. 15, pp. 4589–4599, 2004.
[43] Y. Huang and P. B. Prangnell, “Continuous frictional angular extrusion and its application in the production of ultrafine-grained sheet metals,” Scr. Mater., vol. 56, no. 5, pp. 333–336, Mar. 2007.
[44] D. K. Xu, P. A. Rometsch, and N. Birbilis, “Improved solution treatment for an as-rolled Al–Zn–Mg–Cu alloy. Part I. Characterisation of constituent particles and overheating,” Mater. Sci. Eng. A, vol. 534, pp. 234–243, 2012.
[45] D. N. Seidman, E. A. Marquis, and D. C. Dunand, “Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al ( Sc ) alloys,” vol. 50, pp. 4021–4035, 2002.
[46] S. Shekhar, R. Sarkar, S. K. Kar, and A. Bhattacharjee, “Effect of solution treatment and aging on microstructure and tensile properties of high strength β titanium alloy, Ti–5Al–5V–5Mo–3Cr,” Mater. Des., vol. 66, pp. 596–610, 2015.