[1] Rutherford P.M., Dudes M.J., Samke R.A., Environmental impacts of Phosphogypsum, Sci. Total Environ. 1994, 149:1–38. http://dx.doi.org/10.1016/0048-9697.
[2] Hull, C.D. and Burnett, W.C. Radiochemistry of Florida Phosphogypsum, Journal of EnvironmentalRadioactivity,1996,3:213-238. https://www.sciencedirect.com/science/article/abs/pii/0265931X9500061E.
[3] Sam R. A., Bamford S. A., J. J. Fletcher, F. G. Ofosu, A. Fuseini, Assessment of the Qualities of Dangote and Elephant (Portland) Cement Brands commonly used in the Nigerian Construction Industry Int. J. Sci. Technol., 2013, 2: 252–258. https://www.researchgate.net/publication/315750968_Assessment_of_the_Qualities_of_Dangote_and_Elephant_Portland_Cement_Brands_commonly_used_in_the_Nigerian_Construction_Industry.
[4] Beretka J., Mathew P.J. Natural radioactivity of Australian building materials, industrial wastes and by-products. Health Physics, 1985, 48: 87–95. https://pubmed.ncbi.nlm.nih.gov/3967976/.
[5] Van der Merwe E.M., Purification of South African phosphogypsum for use as Portland cement retarder by a combined thermal and sulphuric acid treatment method C.A Strydom, South Afr. J. Sci.,2004, 100: 411–414. https://www.researchgate.net/publication/236271207_Purification_of_South_African_phosphogypsum_for_use_as_Portland_cement_retarder_by_a_combined_thermal_and_sulphuric_acid_treatment_method.
[6] Singh M, Treating waste phosphogypsum for cement and plaster manufacture Cement Concrete Res., 2002, 32: 1033–1038. https://www.sciencedirect.com/science/article/abs/pii/S0008884602007238?via%3Dihub.
[7] Bolivar J.P., Garcia-Tenorio R., Vaca. F, Radioecological study of an estuarine system located in the south of Spain Pregamon, 2000, 2941:2950. https://doi.org/10.1016/S0043-1354(99)00370-X.
[8] Rashad A. M. , Phosphogypsum as a construction material, Journal of Cleaner ProductionVolume, 2017, 166: 732-743. https://www.sciencedirect.com/science/article/abs/pii/S0959652617317699.
[9] Manjit S., Garg M., Making of anhydrite cement from waste gypsum Cement Concrete Res, 2000,30: 571–577. https://www.sciencedirect.com/science/article/abs/pii/S0950061804001618.
[10] Potgieter J.H., Potgieter S.S., McCrindle R.I., Strydom C.A. An investigation into the effect of various chemical and physical treatments of a South African phosphogypsum to render it suitable as a set retarder for cement Cem. Concr. Res., 2003, 33:1223-1227. https://www.sciencedirect.com/science/article/abs/pii/S0892687501000747.
[11] EN-196-3,4, British European Standard BS EN 196-3,4: 2004. https://shop.bsigroup.com/ProductDetail/?pid=000000000030050210.
[12] Abd ElAziz M., Abd ElAleem. S., Heikal M., & H.El Dizdamony, Hydration and durability of sulphate-resisting and slag cement blends in Caron’s Lake water, Cement and ConcreteResearch,2005,8:1592–1600. https://www.infona.pl/resource/bwmeta1.element.elsevier-44448bc9-6680-33fc-bd06-f58ce035be8b.
[13] EN-197-1,4, British European Standard BS EN 197: 1-4: 2004. https://shop.bsigroup.com/ProductDetail/?pid=000000000030050210.
[14] Taher M.A., Influence of thermally treated phosphogypsum on the properties of Portland slag cement, Retour. Conserve. Recycle. 2007, 52: 28-38, https://www.sciencedirect.com/science/article/abs/pii/S0921344907000237.
[15] D. P. Bentz. Capillary Porosity Depercolation/Repercolation in Hydrating Cement Pastes Via Low-Temperature Calorimetry Measurements and CEMHYD3D Modeling, 2006, 8: 2606- 2611. https://www.researchgate.net/publication/227636203_Capillary_Porosity_DepercolationRepercolation_in_Hydrating_Cement_Pastes_Via_Low Temperature_Calorimetry_Measurements_and_CEMHYD3D_Modeling.
[16] El-Didamony.H., Aiad.I., Heikal M., Al-Masry S., Impact of delayed addition time of SNF condensate on the fire resistance and durability of SRC–SF composite cement pastes, Constr. Build. Mater. 2014, 50: 281-290. https://doi.org/10.1016/j.conbuildmat.2013.09.034.
[17] de'Gennaro R., Cappelletti P., Cerri G., de'Gennaro M., Dondi M., Langella A., Zeolitic tuffs as raw materials for lightweight aggregates, Appl. Clay Sci. 2004, 25: 71-81. https://doi.org/10.1016/j.clay.2003.08.005.
[18] Designation A., C109-80,“, Standard test methods for compressive strength of hydraulic cements,” Annual Book of ASTM Standards 1983.
[19] Mostafaa N.Y. Brownb P.W. Heat of hydration of high reactive pozzolans in blended cements: Isothermal conduction calorimetry, Thermochimica Acta, 2005, 435 162-167https://www.sciencedirect.com/science/article/abs/pii/S0040603105002650?via%3Dihub.
[20] May A., and Sweeney J. W.,“Evaluation of radium and toxic element leaching characteristics of Florida phosphogypsum stockpiles.” The Chemistry and Technology of Gypsum, ASTM Special Technical Publication.1984, 861: 140–159.
[21] Palonen C.V., Kaiser E.W., Inorganic dust treatment process, Google Patents, 1959.
[22] Shatat M.R., Hydration behavior and mechanical properties of blended cement containing various amounts of rice husk ash in presence of metakaolin. Arabian Journal of Chemistry, 2016,9:S1869–S1874. https://www.sciencedirect.com/science/article/pii/S1878535213004346?via%3Dihub.
[23] Al-Tahan A. M., Shatat M.R., Abdallah M. H., Taher M. A., Influence of the thermally and hot water treatment of cement kiln dust on the Physico-chemical features of Portland cement. journal of Building Engineering 2021, 38: 102170. https://doi.org/10.1016/j.jobe.2021.102170.
[24] He H., Stroeven P., Pirard E., Courard L., Key Eng. Mater., Particle Packing Density and Limestone Fillers for More Sustainable Cement. 2012, 517: 331–337. https://www.researchgate.net/publication/271116741_Particle_Packing_Density_and_Limestone_Fillers_for_More_Sustainable_Cement.
[25] Roy, A, Byerly, G. R, Seals, R. K. By‐Product of Sulfur Recovery from Phosphogypsum as Concrete Aggregate, Journal of Materials in Civil Engineering, ASCE 1994, 6: 439-452. https://trid.trb.org/view/413867.
[26] Abo-El-Enein S M. Heikal.A., Amin M.S., Negm H.H., Reactivity of dealuminated kaolin and burnt kaolin using cement kiln dust or hydrated lime as activators, Construction and Building Materials. 2013,47: 1451-1460. https://doi.org/10.1016/j.conbuildmat.2013.06.078.
[27] Saraya M.E.-S.I., Study physico-chemical properties of blended cements containing fixed amount of silica fume, blast furnace slag, basalt and limestone, a comparative study, Constr. Build. Mater. 2014, 72: 104-112. https://doi.org/10.1016/j.conbuildmat.2014.08.071.
[28] Saleh H.M., El-Saied F.A., Salaheldin T.A., Hezo A.A., Macro- and nanomaterials for improvement of mechanical and physical properties of cement kiln dust-based composite materials, J. Cleaner Prod. 2018, 204: 532-541. https://doi.org/10.1016/j.jclepro.2018.08.303.
[29] Vempati R.K., Rao A., Hess T.R., Cocke D.L., Lauer H.V., Fractionation and characterization of Texas lignite class ‘F’ fly ash by XRD, TGA, FTIR, and SFM, Cem. Concr. Res. 1994, 24: 1153-1164. https://doi.org/10.1016/0008-8846(94)90039-6.
[30] Saleh H.M., El-Saied F.A., Salaheldin T.A., Hezo A.A., Influence of severe climatic variability on the structural, mechanical and chemical stability of cement kiln dust-slag-nanosilica composite used for radwaste solidification, Constr. Build. Mater. 2019, 218: 556-567. https://doi.org/10.1016/j.conbuildmat.2019.05.145.
[31] Saleh H.M., Stability of cemented dried water hyacinth used for biosorption of radionuclides under various circumstances, J. Nucl. Mater. 2014, 446: 124-133. https://doi.org/10.1016/j.jnucmat.2013.11.038.
[32] Yaseri S. Masoomi, Verki V., Mahdikhani M., Utilization of high volume cement kiln dust and rice husk ash in the production of sustainable geopolymer, J. Cleaner Prod.2019, 230: 592-602. https://doi.org/10.1016/j.jclepro.2019.05.056.
[33] Mostafa N.Y., El-Hemaly S.A.S., Al-Wakeel E.I., El-Korashy S.A., Brown P.W., Characterization and evaluation of the pozzolanic activity of Egyptian industrial by-products: I: Silica fume and dealuminated kaolin, Cem. Concr. Res. 31 (2001) 467-474, https://doi.org/10.1016/S0008-8846(00)00485-3.