[1] WSP Parson Brinkerhoff, DNV GL, Industrial Decarbonisation & Energy Efficiency Roadmaps to 2050: Ceramic Sector, 2015.
[2] Kermani M, Dong J, Biesuz M, et al. Ultrafast High-Temperature Sintering (UHS) of Fine Grained α-Al2O3. J Eur Ceram Soc 2021, 41: 6626–6633.
[3] Dong J, Pouchly V, Biesuz M, et al. Thermally-Insulated Ultra-Fast High Temperature Sintering (UHS) of Zirconia: A Master Sintering Curve Analysis. Scr Mater 2021, 203: 114076.
[4] Krell A, Blank P, Ma H, et al. Transparent Sintered Corundum with High Hardness and Strength. J Am Ceram Soc 2003, 86: 12–18.
[5] Apetz R, Van Bruggen MPB, Transparent Alumina: A Light-Scattering Model. J Am Ceram Soc 2003, 86: 480–486.
[6] Harmer MP, Brook RJ, Fast Firing - Microstructural Benefits. Trans J Br Ceram Soc 1981, 80: 147–148.
[7] M. N. Rahaman, Ceramic Processing and Sintering, Second Edition, Marcel Dekker, New York, 2017.
[8] Katz JD, Microwave Sintering of Ceramics. Annu Rev Mater Sci 1992, 22: 153–170.
[9] Grasso S, Sakka Y, Maizza G, Electric Current Activated/Assisted Sintering (ECAS): A Review of Patents 1906-2008. Sci Technol Adv Mater 2009, 10: 053001.
[10] Cologna M, Rashkova B, Raj R, Flash Sintering of Nanograin Zirconia in <5 s at 850°C. J Am Ceram Soc 2010, 93: 3556–3559.
[11] Wang C, Ping W, Bai Q, et al. A General Method to Synthesize and Sinter Bulk Ceramics in Seconds. Sci 2020, 368: 521 LP – 526.
[12] Biesuz M, Sglavo VM, Flash Sintering of Ceramics. J Eur Ceram Soc 2019, 39: 115–143.
[13] Biesuz M, Grasso S, Sglavo VM, What’s New in Ceramics Sintering? A Short Report on the Latest Trends and Future Prospects. Curr Opin Solid State Mater Sci 2020, 24: 100868.
[14] Yu M, Grasso S, Mckinnon R, et al. Review of Flash Sintering: Materials, Mechanisms and Modelling. Adv Appl Ceram 2017, 116: 24–60.
[15] Zhang X, Liang S, Zhang P, et al. Fabrication of Transparent Alumina by Rapid Vacuum Pressureless Sintering Technology. J Am Ceram Soc 2012, 95: 2116–2119.
[16] Cheng J, Agrawal D, Zhang Y, et al. Microwave Sintering of Transparent Alumina. Mater Lett 2002, 56: 587–592.
[17] Wang Z, Zhou G, Jiang D, et al. Recent Development of A2B2O7 System Transparent Ceramics. J Adv Ceram 2018, 7: 289–306.
[18] Permin DA, Boldin MS, Belyaev AV, et Al. IR-Transparent MgO-Gd2O3 Composite Ceramics Produced by Self-Propagating High-Temperature Synthesis and Spark Plasma Sintering. J Adv Ceram 2021, 10: 237–246.
[19] Grasso S, Kim BN, Hu C, et al. Highly Transparent Pure Alumina Fabricated by High-Pressure Spark Plasma Sintering. J Am Ceram Soc 2010, 93: 2460–2462.
[20] Wang D, Shen L, Ran S, et al. Transparent Alumina Fabricated by SPS Sintering with AlF3 Doping. Scr Mater 2014, 92: 31–34.
[21] Grasso S, Yoshida H, Porwal H, et al. Highly Transparent α-Alumina Obtained by Low Cost High Pressure SPS. Ceram Int 2013, 39: 3243–3248.
[22] Wang C, Zhong W, Ping W, et al. Rapid Synthesis and Sintering of Metals from Powders. Adv Sci 2021, 8: 2004229.
[23] Guo RF, Mao HR, Zhao ZT, et al. Ultrafast High-Temperature Sintering of Bulk Oxides. Scr Mater 2021, 193: 103–107.
[24] Zhao ZT, Guo RF, Mao HR, et al. Effect of Components on the Microstructures and Properties of Rare-Earth Zirconate Ceramics Prepared by Ultrafast High-Throughput Sintering. J Eur Ceram Soc 2021, 41: 5768–5773.
[25] Biesuz M, Galotta A, Motta A, et al. Speedy Bioceramics: Rapid Densification of Tricalcium Phosphate by Ultrafast High-Temperature Sintering. Mater Sci Eng C 2021, 127: 2–10.
[26] Lin Y, Luo N, Quattrocchi E, et al. Ultrafast High-Temperature Sintering (UHS) of Li1.3Al0.3Ti1.7(PO4)3. Ceram Int 2021, 47: 21982–21987.
[27] Ihrig M, Mishra TP, Scheld WS, et al. Li7La3Zr2O12 Solid Electrolyte Sintered by the Ultrafast High-Temperature Method. J Eur Ceram Soc 2021, 41: 6075–6079.
[28] Wang R, Dong Q, Wang C, et al. High-Temperature Ultrafast Sintering : Exploiting a New Kinetic Region to Fabricate Porous Solid-State Electrolyte Scaffolds. 2021, 33: 2100726.
[29] Luo RX, Kermani M, Guo ZL, et al. Ultrafast High-Temperature Sintering of Silicon Nitride: A Comparison with the State-of-the-Art Techniques. J Eur Ceram Soc 2021, 41: 6338–6345.
[30] Mata-Osoro G, Moya JS, Pecharroman C, Transparent Alumina by Vacuum Sintering. J Eur Ceram Soc 2012, 32: 2925–2933.
[31] Kermani M, Pouchly V, Yong L, Hu C, Grasso G, Water-Assisted Cold Isostatic Pressing to Enhance Sinterability of Alumina Ceramics, Submitted to the International Journal of Applied Ceramic Technology. 2021, Under review.
[32] Zhang J, Meng F, Todd RI, et al. The Nature of Grain Boundaries in Alumina Fabricated by Fast Sintering. Scr Mater 2010, 62: 658–661.
[33] Oishi Y, Kingery WD, Self-Diffusion of Oxygen in Single Crystal and Polycrystalline Aluminum Oxide. J Chem Phys 1960, 33: 480–486.
[34] Marder R, Ghosh P, Reimanis I, et Al. The Influence of Carbon on the Microstructure and Wear Resistance of Alumina. J Am Ceram Soc 2021, 104: 4214–4225.
[35] Kim DH, Kim CH, Effect of Heating Rate on Pore Shrinkage in Yittria-Doped Zirconia. 1993, 76: 1877–1878.
[36] Wang D, Wang X, Xu C, et al. Densification Mechanism of the Ultra-Fast Sintering Dense Alumina. AIP Adv 2020, 10: 025223.
[37] German RM, SINTERING FROM EMPIRICAL OBSERVATIONS TO SCIENTIFIC PRINCIPLES, Elsevier, 2014.
[38] Razavi Hesabi Z, Haghighatzadeh M, Mazaheri M, et al. Suppression of Grain Growth in Sub-Micrometer Alumina via Two-Step Sintering Method. J Eur Ceram Soc 2009, 29: 1371–1377.
[39] Galusek D, Ghillányová K, Sedláček J, et al. The Influence of Additives on Microstrucutre of Sub-Micron Alumina Ceramics Prepared by Two-Stage Sintering. J Eur Ceram Soc 2012, 32: 1965–1970.
[40] Bodišová K, Galusek D, Švančárek P, et al. Grain Growth Suppression in Alumina via Doping and Two-Step Sintering. Ceram Int 2015, 41: 11975–11983.
[41] Krell A, Blank P, The Influence of Shaping Method on the Grain Size Dependence of Strength in Dense Submicrometre Alumina. J Eur Ceram Soc 1996, 16: 1189–1200.
[42] Krell A, Klimke J, Effects of the Homogeneity of Particle Coordination on Solid-State Sintering of Transparent Alumina. 2006, 1992: .
[43] Maca K, Pouchlý V, Bodišová K, et al. Densification of Fine-Grained Alumina Ceramics Doped by Magnesia, Yttria and Zirconia Evaluated by Two Different Sintering Models. J Eur Ceram Soc 2014, 34: 4363–4372.
[44] Kim DS, Lee JH, Sung RJ, et al. Improvement of Translucency in Al2O3 Ceramics by Two-Step Sintering Technique. J Eur Ceram Soc 2007, 27: 3629–3632.