DOI: https://doi.org/10.21203/rs.3.rs-929592/v1
Designing a robot with the best accuracy is always the attractive research direction in robot community. In order to create a Gough-Stewart platform with guaranteed accuracy performance for a dedicated controller, this paper describes a novel advanced optimal design methodology: control-based design methodology. This advanced optimal design method considers the controller positioning accuracy in the design process for getting the optimal geometric parameters of the robot. In this paper, three types of visual servoing controllers are applied to control the motions of the Gough-Stewart platform: leg-direction-based visual servoing, line-based visual servoing and image moment visual servoing. Depend on these controllers, the positioning error models considering the camera observation error together with the controller singularities are analyzed. In the next step, the optimization problems are formulated in order to get the optimal geometric parameters of the robot and the placement of the camera for the Gough-Stewart platform for each type of controller. Then, we perform the co-simulations on the three optimized Gough-Stewart platforms in order to test the positioning accuracy and the robustness with respect to the manufacturing errors. It turns out that the optimal control-based design methodology helps getting both the optimum design parameters of the robot and the performance of the controller {robot + dedicated controller}.