Dimla, D., Camilotto, M. & Miani, F. 2005. Design and optimisation of conformal CCs in injection molding tools. Journal of Materials Processing Technology, 164, 1294-1300.
 Saifullah, A. & Masood, S. Finite element thermal analysis of conformal CCs in injection molding. Proceedings of the 5th Australasian congress on applied mechanics, 2007.
 Saifullah, A., Masood, S. & Sbarski, I. New CCCS design for injection molding. Proceedings of the World Congress on Engineering, 2009.
 Ó Gloinn, T., Hayes, C., Hanniffy, P. & Vaugh, K. 2007. FEA simulation of conformal cooling within injection molds. International Journal of Manufacturing Research, 2, 162-170.
 Au, K. & Yu, K. 2007. A scaffolding architecture for conformal cooling design in rapid plastic injection molding. The International Journal of Advanced Manufacturing Technology, 34, 496-515.
 Wang, Y., Yu, K. M., Wang, C. C. & Zhang, Y. 2011. Automatic design of conformal cooling circuits for rapid tooling. Computer-Aided Design, 43, 1001-1010. In Jahan, S. A., & El-Mounayri, H. (2016). Optimal Conformal CCs in 3D Printed Dies for Plastic Injection Molding. Procedia Manufacturing, 5, 888–900.https://doi.org/10.1016/j.promfg.2016.08.076
 Khan, M., Afaq, S. K., Khan, N. U. & Ahmad, S. 2014. Cycle Time Reduction in Injection Molding Process by Selection of Robust CCCS Design. International Scholarly Research Notices, 2014.
 J. M. Jauregui-Becker, H. Tragter, F. J. A. M. van Houten, Toward a bottom-up approach to automate the design of cooling systems for injection molding, Computer-Aided Design and Applications, 6(2009)447–459, doi:10.3722/cadaps.2009.447-459
 C.-. Y. Chung, Integrated optimum layout of conformal cooling channels and optimal injection molding process parameters for optical lenses, Applied Sciences 9(2019)4341, doi:10.3390/app9204341.
 M.R. Clemente, M.R. Oliveira Panão, Introducing flow architecture in the design and optimization of mold inserts cooling systems, International Journal of Thermal Sciences 127(2018)288–293, doi: 10.1016/j.ijthermalsci.2018.01.035.
 Y. Zhang, B. Hou, Q. Wang, Y. Li, Z. Huang, Automatic design of conformal cooling channels in injection molding tooling, IOP Conference Series: Materials Science and Engineering. 307(2018)012025, doi:10.1088/1757-899X/307/1/012025.
 O. Tuteski, A. Kocov, Conformal cooling channels in injection molding tools–design considerations, Machines, Technologies, Materials .12(2018)445–448.
 K. Altaf, A. M. B. A. Rani, Numerical study of profiled conformal cooling channels for cooling time reduction in injection mold tools, International Journal of Engineering Systems Modelling and Simulation. 7 (2015) 230-237, doi: 10.1504/IJESMS.2015.072508
 G. R. Berger, D. Zorn, W. Friesenbichler, F. Bevc, C. J. Bodor, Efficient cooling of hot spots in injection molding. A biomimetic CCCS versus a heat-conductive mold material and a heat conductive plastic, Polymer Engineering Science, 59 (2019), E180- E188, doi 10.1002/pen.25024
 Lin JC (2002) Optimum cooling system design of a free-form injection mold using an abductive network. Journal of Materials Processing Technology, 120:226–2367.
 H.-S. Park and X.-P. Dang, Optimization of conformal CCs with array of baffles for plastic injection mold," International Journal of Precision Engineering and Manufacturing, vol. 11, no. 6, pp. 879-890, 2010.
 Lam YC, Zhai LY, Tai K, Fok SC (2004) An evolutionary approach for cooling system optimization in plastic injection molding. International Journal of Production Research 42:2047–2061.
 Li XP, Zhao GQ, Guan YJ, Ma MX (2009) Optimal design of heating channels for rapid heating cycle injection mold based on response surface and genetic algorithm. Materials and Design 30:4317–4323.
 Park SJ, Kwon TH (1998) Optimal cooling system design for the injection molding process. Polymer Engineering & Science 38:1450–1462
 Haarhoff PC, Buys JD (1970) A new method for the optimization of a nonlinear function subject to nonlinear constraints. The Computer Journal 13:178–184
 Qiao H (2005) Transient mold cooling analysis using BEM with the time-dependent fundamental solution. International Communications in Heat and Mass Transfer 32:315–322
 Qiao H (2006) A systematic computer-aided approach to cooling system optimal design in plastic injection molding. 48:430–439
 Zhou H, Zhang Y, Wen J, Li D (2009) A new method for the optimization of a nonlinear function subject to nonlinear constraints. Engineering Analysis with Boundary Elements 33:1022–1030
 Feng S, Amar M K, Pei Y, Design and fabrication of conformal CCs in molds: Review and progress updates, International Journal of Heat and Mass Transfer 204 (2021) 124082
 Shen C, Wang L, Li Q (2007). Optimization of injection molding process parameters using combination of artificial neural network and genetic algorithm method. Journal of Materials Processing Technology, 183(2–3), 412–418. https://doi.org/10.1016/j.jmatprotec.2006.10.036
 Wang G , Zhao G, Li H, Guan Y (2011). Research on optimization design of the heating/CCs for rapid heat cycle molding based on response surface methodology and constrained particle swarm optimization. Expert Systems with Applications, 38(6), 6705–6719. https://doi.org/10.1016/j.eswa.2010.11.063
 Mayer S 2005. Optimised mold temperature control procedure using DMLS. EOS Whitepaper, EOS, GmbH Ltd, 1-10.
 Au and K, Yu K, Variable distance adjustment for conformal CCCS design in rapid tool," Journal of Manufacturing Science and Engineering, vol. 136, no. 4, 044501, 2014.
 Silva H M, Noversa T, Fernandes L, Rodrigues H, Pontes A, Simulation of a transient 2D Heat transfer of an injection mold: comparison between ANSYS Workbench and ANSYS Mechanical APDL [submitted]
 Silva H M , Noversa T , Fernandes L , Rodrigues H , Pontes A , Sensitivity analysis of conformal CCs for injection molds: 2D Transient Heat Transfer Analysis [submitted]
 Silva H M , Noversa T , Fernandes L , Rodrigues H , Pontes A , Design Optimization of conformal cooling channels for injection molds: 2D Transient Heat Transfer Analysis [submitted]
 Silva HM, Noversa T, Fernandes L, Rodrigues H, Pontes A, 3D Heat transfer Simulation of an injection mold: comparison between ANSYS Workbench and ANSYS Mechanical APDL [submitted]
 Silva HM, Noversa T, Fernandes L, Rodrigues H, Pontes A, Sensitivity analysis of conformal CCs for injection molds: 3D Transient Heat Transfer Analysis [submitted]
 Silva HM, Noversa T, Fernandes L, Rodrigues H, Pontes A, Design Optimization of conformal cooling channels for injection molds: 3D Transient Heat Transfer Analysis [submitted]