Deshmukh A, Deo S, Salgia AK, Agarwal T, A Rare Unusual Case Presentation of the Tuberculosis of the Shoulder Joint. J Orthop Case Rep.2013 Oct-Dec;3(4):23-5.
 Tuli S. M. Tuberculosis of the skeletal system. 2nd ed. New Delhi, Jaypee Brothers Medical Publisher (P) Ltd. 1993.
 Sankaran B. Tuberculosis Of Bones & Joints; Ind. J. Tub., 1993, 40,109.
 Tang X, Guo W, Yang R, et al. Synthetic mesh improves shoulder function after intraarticular resection and prosthetic replacement of proximal humerus. Clin Orthop Relat Res 2015;473:1464–71.
 Werner BC, Burrus MT, Begho I, et al. Early revision within 1 year after shoulder arthroplasty: patient factors and etiology. J Shoulder Elbow Surg/Am Shoulder Elbow Surg 2015;24:323–30.
 Voorde PC, Rasmussen JV, Olsen BS, et al. Resurfacing shoulder arthroplasty for the treatment of severe rheumatoid arthritis: outcome in 167 patients from the Danish Shoulder Registry. Acta Orthop 2015; 86:293–7.
 Vuillermin CB, Trump ME, Barwood SA, et al. Catastrophic failure of a low profile metal-backed glenoid component after total shoulder arthroplasty. Int J Shoulder Surg 2015;9:121–7.
 Tanagho A, Morgan B, Ravenscroft M. Total humeral endoprosthesis replacement to salvage periprosthetic fractures in rheumatoid arthritis. Orthopedics 2017;40:e363–6.
 Roberson TA, Bentley JC, Griscom JT, et al. Outcomes of total shoulder arthroplasty in patients younger than 65 years: a systematic review. J Shoulder Elbow Surg 2017;26:1298–306.
 Fevang BTS, Lie SA, Havelin LI, et al. Risk factors for revision after shoulder arthroplasty. Acta Orthop 2009;80:83–91.
 Linberg CJ, Sperling JW, Schleck CD, et al. Shoulder arthroplasty in morbidly obese patients. J Shoulder Elbow Surg 2009;18:903–6.
 Farng E, Zingmond D, Krenek L, et al. Factors predicting complication rates after primary shoulder arthroplasty. J Shoulder Elbow Surg 2011;20:557–63.
 Singh JA, Sperling JW, Cofield RH. Revision surgery following Total Shoulder Arthroplasty: Analysis of 2,588 shoulders over 3 decades (1976–2008). J Bone Jt Surg Br Vol 2011;93:1513–7.
 Rasmussen JV. Outcome and risk of revision following shoulder replacement in patients with glenohumeral osteoarthritis. Acta Orthop Suppl 2014;85:1–23.
 Rasmussen JV, Polk A, Brorson S, et al. Patient-reported outcome and risk of revision after shoulder replacement for osteoarthritis. Acta Orthop 2014;85:117–22.
 Rengier F, Mehndiratta A, von Tengg-Kobligk H, et al. 3D printing based on imaging data: review of medical applications. Int J Comput Assist Radiol Surg 2010;5:335–41.
 Li H, Wang L, Mao Y, et al. Revision of complex acetabular defects using cages with the aid of rapid prototyping. J Arthroplasty 2013;28:1770–5.
 Tan H, Yang K, Wei P, et al. A novel preoperative planning technique using a combination of ct angiography and three-dimensional printing for complex toe-to-hand reconstruction. J Reconstr Microsurg 2015;31:369–77.
 Wang D, Wang Y, Wang J, et al. Design and fabrication of a precision template for spine surgery using selective laser melting (SLM). Materials (Basel) 2016;22: pii:E608.
 Iqbal T, Shi L, Wang L, et al. Development of finite element model for customized prostheses design for patient with pelvic bone tumor. Proc Inst Mech Eng H 2017;231:525–33.
 OtawaN, Sumida T, Kitagaki H, et al. Custom-made titaniumdevices as membranes for bone augmentation in implant treatment: Modeling accuracy of titanium products constructed with selective laser melting. J Craniomaxillofac Surg 2015;43:1289–95.
 Qian C, Zhang F, Sun J. Fabrication of Ti/HA composite and functionally graded implant by three-dimensional printing. Biomed Mater Eng 2015;25:127–36.
 Shao H, Ke X, Liu A, et al. Bone regeneration in 3D printing bioactive ceramic scaffolds with improved tissue/material interface pore architecture in thin-wall bone defect. Biofabrication 2017;9:025003.
 Lv J, Jia Z, Li J, et al. Electron beam melting fabrication of porous ti6al4v scaffolds: cytocompatibility and osteogenesis. Adv Eng Mater 2015;
 Markhoff J,Wieding J, Weissmann V, et al. Influence of different three-dimensional open porous titanium scaffold designs on human osteoblasts behavior in static and dynamic cell investigations. Materials 2015;8:5490–507.
 Kim HN, Xiao NL, Noh KC. Use of a real-size 3D-printed model as a preoperative and intraoperative tool for minimally invasive plating of comminuted midshaft clavicle fractures. J Orthop Surg Res 2015;10:91.
 Wu XB, Wang JQ, Zhao CP, et al. Printed three-dimensional anatomic templates for virtual preoperative planning before reconstruction of old pelvic injuries: initial results. Chin Med J (Engl) 2015;128:477–82.
Chen X,XuL,Wang Y, et al. Image-guided installation of 3D-printed patientspecific implant and its application in pelvic tumor resection and reconstruction surgery. Comput Methods Programs Biomed 2016;125:66–78.
 Shan XF, Chen HM, Liang J, et al. Surgical reconstruction of maxillary and mandibular defects using a printed titanium mesh. JOral Maxillofac Surg 2015;73:e1437–1439.
 ByrneN,Velasco ForteM,Tandon A,Valverde I, HussainT.Asystematic review of image segmentation methodology, used in the additive manufacture of patient-specific 3Dprintedmodels of the cardiovascular system. JRSM Cardiovasc Dis. 2016;5:2048004016645467.
 Riggs KW, Dsouza G, Broderick JT, Moore RA, Morales DLS. 3D-printed models optimize preoperative planning for pediatric cardiac tumor debulking. Transl Pediatr. 2018;7(3):196–202.