[1] Musfirah, A. H., & Jaharah, A. G. (2012). Magnesium and aluminum alloys in automotive industry. Journal of Applied Sciences Research, 8(10), 4865- 4875.
[2] Farrokhi- Rad, M. (2018). Electrophoretic deposition of fiber hydroxyapatite / Titania nanocomposite coatings ceramic International, 44(1). 622-630.
[3] Chen, X., Chen, S., Liang, L., Hong, H., Zhang, Z., & Shen, B. (2018). Electrochemical behavior of EPD synthesized graphene coating on titanium alloys for orthopedic implant application. Procedia CIRP, 71, 322-328.
[4] Pansini, M., Dell' Agli, G., Marocco, A., Netti, P. A., Battista, E., Lettera, V., … & Barrera, G. (2017).
[5] Farrokhi- Rad, M., Shahrabi, T., Mahmoodi, S., & Khanmohammadi, S. (2017). Electrophoretic deposition of hydroxyapatite- chitosan- CNTs nanocomposite coatings. Ceramics International, 43 (5), 4663- 4669.
[6] Bakhsheshi- Rad, H. R., Hamzah, E., Dias, G. J., Saud, S. N., Yaghoubidoust, F., & Hadisi, Z. (2017). Fabrication and characterization of novel Zno/ MWCNT duplex coating deposited on Mg alloy by PVD coupled with dip-coating techniques. Journal of Alloys and compounds, 728, 159-168.
[7] Khandan, A., Abdellahi, M., Ozada, N., & Ghayour, H. (2016). Study of the bioactivity, wettability and hardness behaviour of the bovine hydroxyapatite-diopside bio-nanocomposite coating. Journal of the Taiwan Institute of Chemical Engineers, 60, 538-546.
[8] Ducheyne, P., Radin., Heughebaert, M., & Heughebaert, J.C. (1990). Calcium phosphate ceramic coatings on porous titanium: effect of structure and composition on electrophoretic deposition, vacuum sintering and in vitro dissolution. Biomaterials, 11 (4), 244- 254.
[9] Murugan, N., Murugan, C., & Sundramoorthy, A. K. (2018). In vitro and in vitro characterization of mineralized hydroxyapatite / polycaprolactone- graphene oxide based bioactive multifunctional coating on Ti alloy for bone implant applications. Arabian Journal of Chemistry.
[10] Ismail, R. A., Hamoudi, W. K., & Abbas, H. F. (2018). Electrophoretic deposition of hydroxyapatite- shrimp crusts nanocomposite thin films for bone implant studies. IET Nanobiotechnology.
[11] Kus'nierczyk, K., & Basista, M. (2017). Recent advances phosphate composites as biodegradable implant materials. Journal of biomaterials applications, 31 (6), 878- 900.
[12] Al-Rashidy, Z. M., Farag, M. M., Ghany, N. A., Ibrahim, A. M., & Abdel- Fattah, W. I. (2017). Aqueous electrophoretic deposition and corrosion protection of borate glass coatings on 316 L stainless steel for hard tissue fixation. Surfaces and Interfaces, 7, 125-133.
[13] Nakajama, S. (1990). Experimental studies of healing process on rienforcment ceramic implantation in rabbit mandible. Shika gakuho. Dental Science reports, 90 (4), 525- 553.
[14] Nakajima, S., Kurihara, Y., Wakatsuki, Y., & Noma, H. (1989). Physico-chemical characteristics of new reinforcement ceramic implant, Shika gakuho. Dental Science reports, 89 (11), 1709 – 1717.
[15] Wu C.T., & Chang J. (2004). Synthesis and apatite-formation ability of akermanite. Materials Letters, 58 (19), 2415-2417.
[16] Fathi, M.H., Doost Mohammadi, A., “Prepration and Charactrization of Sol-gel bioactive Engineering”, Materials scienceA, Vol. 474, pp. 128-133, 2008.
[17] Głuzek, J., Masalski, J., Furman, P., & Nitsch, K. (1997). Structural and electrochemical examinations of PACVD TiO2 films in Ringer solution. Biomaterials, 18(11), 789-794
[18] Fathi, M. H., Mortazavi, V., & Moosavi, S. B. (2002). Designing, preparing and evaluation of novel HA/Ti composite coating for endodontic dental implant. Journal of Dental Medicine, 15(3), 39-54.
[19] Tiwari, S. K., Mishra, T., Gunjan, M. K., Bhattacharyya, A. S., Singh, T. B., & Singh, R. (2007). Development and characterization of sol–gel silica–alumina composite coatings on AISI 316L for implant applications. Surface and Coatings Technology, 201(16-17), 7582-7588.
[20] Fathi, M. H., & Doostmohammadi, A. (2009). Bioactive glass nanopowder and bioglass coating for biocompatibility improvement of metallic implant. Journal of materials processing technology, 209(3), 1385-1391.
[21] Salehi, S., & Fathi, M. H. (2010, November). Preparation of sol-gel derived hydroxyapatite/yttria stabilized zirconia nanocomposite coatings on 316 L stainless steel. In 2010 17th Iranian Conference of Biomedical Engineering (ICBME) (pp. 1-4). IEEE.
[22] Fu, T., Wen, C. S., Lu, J., Zhou, Y. M., Ma, S. G., Dong, B. H., & Liu, B. G. (2012). Sol-gel derived TiO2 coating on plasma nitrided 316L stainless steel. Vacuum, 86(9), 1402-1407.
[23] Tiwari, S.K., Mishra, T., Gunjan, M.K., Bahattacharyya, A., Singh, R., “Development and characterization of sol–gel silica–alumina composite coatings on AISI 316L for implant applications”, Surface & Coatings Technology, Vol. 201, pp. 7582–7588, 2007.
[24] Khandan, A., Abdellahi, M., Barenji, R. V., Ozada, N., & Karamian, E. (2015). Introducing natural hydroxyapatite-diopside (NHA-Di) nano-bioceramic coating. Ceramics International, 41(9), 12355-12363.
[25] Eshtiagh. Hossein, H., Housaindokht, M., Chahkandi, M., “Effects of parameters of sol–gel process on the phase evolution of sol–gel-derived hydroxyapatite”, Materials Chemistry and Physics, Vol. 106, pp.310-316, 2007.
[26] Kokubo, T., Kim, H.M., Kawashita, M., “Novel bioactive materials with different mechanical properties”, Biomaterials, Vol. 24, pp. 2161–2175, 2003.
[27] Grandfield, K., Zhitomirsky, I., “GrandfieldElectrophoretic deposition of compositehydroxyapatite–silica–chitosan coatings”, Materials characterization, Vol. 59, pp. 61-67, 2008.
[28] Lu, X., Wang, Y.B., Liu, Y.R., Wang, J.X., Qu, S., Feng, B., Weng, J., “Preparation of HA/chitosan composite coatings on alkali treated titanium surfaces through sol–gel techniques”, Materials Letters, Vol.61 , pp. 3970–3973, 2007.
[29] Luciani, G., Costantini, A., Silvestri, B., Tescione, F., Brand, F., Pezella, A., "Synthesis, Structure and Bioactivity of pHEMA/SiO2 hybrids derived in situ sol-gel Process", Journal sol-gel Science Technology, Vol.46, pp.166-175, 2008.
[30] Evans, S.L., Gregson, P.J., "composite Technology in Load Bearing Orthopeadic Implants", Biomaterials, Vol.19, pp.1329-1342, 1998.
[31] Lo´pez, D.A., Dura´n, A., Cere, S.M., “Electrochemical characterization of AISI 316L stainless steel in contact with simulated body fluid under infection conditions", J Mater Sci: Mater Med, Vol. 19, pp: 2137–2144, 2008.
[32] Farker, D., Anna, C., Corrosion of Metalitic implants and prosthetic devices, Corrosion metal Handbook, ASM, Vol. 13, 1992.
[33] Shara, D., “The Problem of corrosion in Orthopaedic Implant Mateials", Orthopaedic Update (India) 2, Vol. 9, No. 1, April 1999.
[34] Janas, J., "Overview of Biomaterials and Their Use in Medical Devices", Handbook of Materials for Medical Devices, Chapter1, pp. 3-5, 2003.
[35] Saha, P., Gally, E., "Corrosion of Titanium, Stainless steel, Chromium Cobalt Alloys, Amalgam-Orthopaedic & Dental Applications", Metalic Biomaterials, Vol. 74, pp.234-236, 2002.
[36] Breme, J., Beihl, V., Metallic Biomaterials, Handbook of Biomaterials properties, Vol.23, pp. 135-143, 1998.
[37] Shieu F.S., Deng M.J., Lin S.H., “Microstructure and acorrosion of a Type 316L Stainless steel”, Corrosion Science, Vol.40, No.8, pp.1267-1279, 1998.
[38] Fathi, M.H., Salehi, Saatchi,M., Mortazavi,A., Moosavi,V., “In vitro corrosion behavior of boiceramic, metallic and bioceramic metallic coated stainless steel dental implants”, Dental Materials, Vol. 19, pp. 188-198, 2003.
[39] Yashimista O., Emiko G., “comparision of Metal Release from Various Metallic Biomaterials in Vitro”, Biomaterials, Vol. 26, pp.11-21, 2005.
[40] RuizMoreno, R. G., Martinez, A. I., Castro-Rodriguez, R., & Bartolo, P. (2013). Synthesis and characterization of citrate coated magnetite nanoparticles. Journal of superconductivity and novel magnetism, 26(3), 709-712.
[41] Kazemzadeh, H., Ataie, A., & Rashchi, F. (2012). In situ synthesis of silica-coated magnetite nanoparticles by reverse coprecipitation method. Journal of superconductivity and novel magnetism, 25(8), 2803-2808.
[42] Sarma, L., Borah, J. P., Srinivasan, A., & Sarma, S. (2019). Synthesis and Characterization of Tea Polyphenol–Coated Magnetite Nanoparticles for Hyperthermia Application. Journal of Superconductivity and Novel Magnetism, 1-8.
[43] Perez-Gonzalez, T., Rodriguez-Navarro, A., & Jimenez-Lopez, C. (2011). Inorganic magnetite precipitation at 25 C: a low-cost inorganic coprecipitation method. Journal of superconductivity and novel magnetism, 24(1-2), 549-557.
[44] Yadav, B. S., Singh, R., Vishwakarma, A. K., & Kumar, N. (2020). Facile Synthesis of Substantially Magnetic Hollow Nanospheres of Maghemite (γ-Fe 2 O 3) Originated from Magnetite (Fe 3 O 4) via Solvothermal Method. Journal of Superconductivity and Novel Magnetism, 1-10.
[45] Alaei, M., Atapour, M., & Labbaf, S. (2020). Electrophoretic deposition of chitosan-bioactive glass nanocomposite coatings on AZ91 Mg alloy for biomedical applications. Progress in Organic Coatings, 147, 105803.
[46] Ren, Y., Babaie, E., & Bhaduri, S. B. (2018). Nanostructured amorphous magnesium phosphate/poly (lactic acid) composite coating for enhanced corrosion resistance and bioactivity of biodegradable AZ31 magnesium alloy. Progress in Organic Coatings, 118, 1-8.
[47] Kiran, A. S. K., Kumar, T. S., Perumal, G., Sanghavi, R., Doble, M., & Ramakrishna, S. (2018). Dual nanofibrous bioactive coating and antimicrobial surface treatment for infection resistant titanium implants. Progress in Organic Coatings, 121, 112-119.
[48] Akay, S. K., Peksoz, A., & Kara, A. (2018). Magnetic Responses of Divinylbenzene-Fe 3 O 4 Composite Film Deposited by Free Radical Polymerization Method. Journal of Superconductivity and Novel Magnetism, 31(3), 849-854.