1. Lee, S. H., Lee, S., Jin, B. S. & Kim, H. S. Optimized electrochemical performance of Ni rich LiNi0.91Co0.06Mn0.03O2 cathodes for high-energy lithium ion batteries. Sci. Rep. 9, 8901; 10.1038/s41598-019-45531-2 (2019).
2. Eum, D. et al. Voltage decay and redox asymmetry mitigation by reversible cation migration in lithium-rich layered oxide electrodes. Nat. Mater. 19, 419–427 (2020).
3. Yin, W. et al. Structural evolution at the oxidative and reductive limits in the first electrochemical cycle of Li1.2Ni0.13Mn0.54Co0.13O2. Nat. Commun. 11, 1252; 10.1038/s41467-020-14927-4 (2020).
4. Sim, S. J., Lee, S. H., Jin, B. S. & Kim, H. S. Use of carbon coating on LiNi0.8Co0.1Mn0.1O2 cathode material for enhanced performances of lithium-ion batteries. Sci. Rep. 10, 11114; 10.1038/s41598-020-67818-5 (2020).
5. Lee, H. et al. Characterization and control of irreversible reaction in Li-rich cathode during the initial charge process. ACS Appl. Mater. Interfaces 10, 10804–10818 (2018).
6. Yu, H. et al. Surface enrichment and diffusion enabling gradient-doping and coating of Ni-rich cathode toward Li-ion batteries. Nat. Commun. 12, 4564; 10.1038/s41467-021-24893-0 (2021).
7. Kim, H. G. & Park, Y. J. Synergy effect of K doping and Nb oxide coating on Li1.2Ni 0.13Co0.13Mn0.54O2 cathodes. J. Electrochem. Sci. Technol. Published onlind at https://doi.org/10.33961/jecst.2021.00052 (2021).
8. McCalla, E. et al. Visualization of O-O peroxo-like dimers in high-capacity layered oxides for Li-ion batteries. Science 350, 1516–1521 (2015).
9. Pearce, P. E. et al. Evidence for anionic redox activity in a tridimensional-ordered Li-rich positive electrode β-Li2IrO3. Nat. Mater. 16, 580–586 (2017).
10. Freire, M. et al. A new active Li-Mn-O compound for high energy density Li-ion batteries. Nat. Mater. 15, 173–177 (2016).
11. Luo, K. et al. Charge-compensation in 3d-transition-metal-oxide intercalation cathodes through the generation of localized electron holes on oxygen. Nat. Chem. 8, 684–691 (2016).
12. Okubo, M. & Yamada, A. Molecular orbital principles of oxygen-redox battery electrodes. ACS Appl. Mater. Interfaces 9, 36463–36472 (2017).
13. Cui, C. et al. Structure and interface design enable stable Li-rich cathode. J. Am. Chem. Soc. 142, 8918–8927 (2020).
14. Zhou, Y. et al. Sufficient oxygen redox activation against voltage decay in Li-rich layered oxide cathode materials. ACS Mater. Lett. 3, 433–441 (2021).
15. Fu, C., Li, G., Luo, D., Zheng, J. & Li, L. Gel-combustion synthesis of Li1.2Mn0.4Co0.4O2 composites with a high capacity and superior rate capability for lithium-ion batteries. J. Mater. Chem. A 2, 1471–1483 (2014).
16. Qiu, B., Zhang, M., Xia, Y., Liu, Z. & Meng, Y. S. Understanding and controlling anionic electrochemical activity in high-capacity oxides for next generation Li-ion batteries. Chem. Mater. 29, 908–915 (2017).
17. Gent, W. E. et al. Coupling between oxygen redox and cation migration explains unusual electrochemistry in lithium-rich layered oxides. Nat. Commun. 8, 2091; 10.1038/s41467-017-02041-x (2017).
18. Zhu, Z. et al. Anion-redox nanolithia cathodes for Li-ion batteries. Nat. Energy 1, 16111; 10.1038/nenergy.2016.111 (2016).
19. Qiao, Y., Deng, H., He, P. & Zhou, H. A 500 Wh/kg lithium-metal cell based on anionic redox. Joule 4, 1445–1458 (2020).
20. Kobayashi, H. et al. Improved performance of Co-doped Li2O cathodes for lithium-peroxide batteries using LiCoO2 as a dopant source. J. Power Sources 306, 567–572 (2016).
21. Harada, K. et al. Electrochemical reactions and cathode properties of Fe-doped Li2O for the hermetically sealed lithium peroxide battery. J. Power Sources 322, 49–56 (2016).
22. Qiao, Y., Jiang, K., Deng, H. & Zhou, H. A high-energy-density and long-life lithium-ion battery via reversible oxide–peroxide conversion. Nat. Catal. 2, 1035–1044 (2019).
23. Lee, B. G. & Park, Y. J. Lithia-based nanocomposites activated by Li2RuO3 for new cathode materials rooted in the oxygen redox reaction. Nanoscale Res. Lett. 14, 378; 10.1186/s11671-019-3223-4 (2019).
24. Lee, S. Y. & Park, Y. J. Lithia/(Ir, Li2IrO3) nanocomposites for new cathode materials based on pure anionic redox reaction. Sci. Rep. 9, 13180; 10.1038/s41598-019-49806-6 (2019).
25. Kobayashi, H. et al. Synthesis of Cu-doped Li2O and its cathode properties for lithium-ion batteries based on oxide/peroxide redox reactions. J. Power Sources 340, 365–372 (2017).
26. Lee, B. G. & Park, Y. J. Enhanced electrochemical performance of lithia/Li2RuO3 cathode by adding tris(trimethylsilyl)borate as electrolyte additive. Sci. Rep. 10, 13498; 10.1038/s41598-020-70333-2 (2020).
27. Lee, S. Y. & Park, Y. J. Effect of vinylethylene carbonate and fluoroethylene carbonate electrolyte additives on the performance of lithia-based cathodes. ACS Omega 5, 3579–3587 (2020).
28. Kobayashi, H. et al. Cathode performance of co-doped Li 2 O with specific capacity (400 mAh/g) enhanced by vinylene carbonate. J. Electrochem. Soc. 164, A750–A753 (2017).
29. Zhang, S. S. Problems and their origins of Ni-rich layered oxide cathode materials. Energy Storage Mater. 24, 247–254 (2020).
30. Seong, W. M., Kim, Y. & Manthiram, A. Impact of residual lithium on the adoption of high-nickel layered oxide cathodes for lithium-ion batteries. Chem. Mater. 32, 9479–9489 (2020).
31. Ross, G. J., Watts, J. F., Hill, M. P. & Morrissey, P. Surface modification of poly(vinylidene fluoride) by alkaline treatment: 1. The degradation mechanism. Polymer 41, 1685–1696 (2000).
32. Stich, M., Göttlinger, M., Kurniawan, M., Schmidt, U. & Bund, A. Hydrolysis of LiPF6 in carbonate-based electrolytes for lithium-ion batteries and in aqueous media. J. Phys. Chem. C 122, 8836–8842 (2018).
33. Cho, D.-H. et al. Effect of residual lithium compounds on layer Ni-Rich Li[Ni0.7Mn0.3]O2. J. Electrochem. Soc. 161, A920–A926 (2014).
34. Gong, L., Nguyen, M. H. T. & Oh, E. S. High polar polyacrylonitrile as a potential binder for negative electrodes in lithium ion batteries. Electrochem. Comm. 29, 45–47 (2013).
35. Lee, S., Kim, E. Y., Lee, H. & Oh, E. S. Effects of polymeric binders on electrochemical performances of spinel lithium manganese oxide cathodes in lithium ion batteries. J. Power Sources 269, 418–423 (2014).
36. Andersson, A. M., Herstedt, M., Bishop, A. G. & Edström, K. The influence of lithium salt on the interfacial reactions controlling the thermal stability of graphite anodes. Electrochim. Acta 47, 1885–1898 (2002).
37. Li, F. et al. Dual-salts of LiTFSI and LiODFB for high voltage cathode LiNi0.5Mn1.5O4. J. Solid State Electrochem. 20, 3491–3498 (2016).
38. Dahbi, M., Ghamouss, F., Tran-Van, F., Lemordant, D. & Anouti, M. Comparative study of EC/DMC LiTFSI and LiPF6 electrolytes for electrochemical storage. J. Power Sources 196, 9743–9750 (2011).
39. Wang, L. et al. 1,3,6-Hexanetricarbonitrile as electrolyte additive for enhancing electrochemical performance of high voltage Li-rich layered oxide cathode. J. Power Sources 361, 227–236 (2017).
40. Kim, K. et al. Dual-function ethyl 4,4,4-trifluorobutyrate additive for high-performance Ni-rich cathodes and stable graphite anodes. J. Power Sources 396, 276–287 (2018).
41. Edström, K., Gustafsson, T. & Thomas, J. O. The cathode-electrolyte interface in the Li-ion battery. Electrochim. Acta 50, 397–403 (2004).