Adesina O.T, Jamiru T, Sadiku ER, Ogunbiyi OF, Beneke LW (2019) Mechanical evaluation of hybrid natural fibre–reinforced polymeric composites for automotive bumper beam: a review. J. Adv. Manuf. Technol 103:1781-1797.
Ashok Kumar M, Ramachandra Reddy G, Siva Bharathi Y, Venkata Naidu S, Naga Prasad Naidu V (2010) Frictional coefficient, hardness, impact strength, and chemical resistance of reinforced sisal-glass fiber epoxy hybrid composites. J. Compos. Mater 44:3195-3202.
Belaadi A, Boumaaza M, Amroune S, Bourchak M. (2020) Mechanical characterization and optimization of delamination factor in drilling bidirectional jute fibre-reinforced polymer biocomposites. Int. J. Adv. Manuf. Technol, 111:2073-2094.
Belaadi A, Laouici H, Bourchak M. (2019). Mechanical and drilling performance of short jute fibre-reinforced polymer biocomposites: statistical approach. Int. J. Adv. Manuf. Technol, 106:1989-2006.
Büyükkaya K, Demirer H (2020) Examining the mechanical and thermomechanical properties of polymethylmethacrylate composites reinforced with nettle fibres. Arab J Sci Eng 45:665-674.
Celino A, Fréour S, Jacquemin F, Casari P (2013). Characterization and modeling of the moisture diffusion behavior of natural fibers. J. Appl. Polym. Sci 130:297-306.
Chandramohan, D., Murali, B., Vasantha-Srinivasan, P. and Kumar, S.D., 2019. Mechanical, moisture absorption, and abrasion resistance properties of bamboo–jute–glass fiber composites. Journal of Bio-and Tribo-Corrosion 5:1-8.
Chaudhary V, Bajpai PK, Maheshwari S (2020) Effect of moisture absorption on the mechanical performance of natural fiber reinforced woven hybrid bio-composites. J. Nat. Fibers 17:84-100.
Chowdary MS, Raghavendra G, Kumar MN, Ojha S, Boggarapu V (2020) Influence of Nano-Silica on Enhancing the Mechanical Properties of Sisal/Kevlar Fiber Reinforced Polyester Hybrid Composites. Silicon:1-8.
De Rosa IM, Kenny JM, Puglia D, Santulli C, Sarasini F (2010) Morphological, thermal and mechanical characterization of okra (Abelmoschus esculentus) fibres as potential reinforcement in polymer composites. Compos Sci Technol, 70:116-122.
Debeli DK, Guo J, Li Z, Zhu J, Li N (2017) Treatment of ramie fiber with different techniques: the influence of diammonium phosphate on interfacial adhesion properties of ramie fiber-reinforced polylactic acid composite. Iran Polym J 26:341-354.
Dev I, Ram A, Ahlawat SP, Palsaniya DR, Singh R, Dhyani S.K, Kumar N, Tewari RK, Singh M, Babanna SK, Newaj R (2020) Bamboo-based agroforestry system (Dendrocalamus strictus+ sesame–chickpea) for enhancing productivity in semi-arid tropics of central India. Agrofor. Syst 94:1725-1739.
Devireddy SBR, Biswas S (2017) Physical and mechanical behavior of unidirectional banana/jute fiber reinforced epoxy based hybrid composites. Polym. Compos 38:1396-1403.
Gholampour A, Ozbakkaloglu T (2020) A review of natural fiber composites: Properties, modification and processing techniques, characterization, applications. J. Mater. Sci 55:829-892.
Gunti R, Ratna Prasad AV, Gupta AVSSKS (2018) Mechanical and degradation properties of natural fiber‐reinforced PLA composites: Jute, sisal, and elephant grass. Polym. Compos 39:1125-1136.
Gupta A (2016) Synthesis, chemical resistance, and water absorption of bamboo fiber reinforced epoxy composites. Polym. Compos 37:141-145.
Gupta A (2020) Effect of Industrial Waste on Chemical and Water Absorption of Bamboo Fiber Reinforced Composites. Silicon 12:139-146.
Harish S, Michael DP, Bensely A, Lal DM, Rajadurai A (2009) Mechanical property evaluation of natural fiber coir composite. Mater. Charact 60:44-49.
Hestiawan H (2020) The water absorption, mechanical and thermal properties of chemically treated woven fan palm reinforced polyester composites. J. Mater. Res. Technol 9:4410-4420.
Jayamani E, Loong TG, Bakri, MKB (2020) Comparative study of Fourier transform infrared spectroscopy (FTIR) analysis of natural fibres treated with chemical, physical and biological methods. Polym. Bull 77:1605-1629.
Kansal S, Verma AS, Kant S, Pankaj (2020) Parametric study of sisal-epoxy resin composite treated in sodium bicarbonate solution using Taguchi orthogonal array. Int. J. Mater. Eng. Innov. 11: 264-274.
Lotfi A, Li H, Dao DV. (2018) Drilling behavior of flax/poly (lactic acid) bio-composite laminates: an experimental investigation. J. Nat. Fibers, 17: 1264-1280
Mahendrakumar N, Thyla PR, Mohanram PV, Sabareeswaran A, Manas RB, Srivatsan S (2015) Mechanical and dynamic properties of nettle-polyester composite. Mater Express 5:505-517.
Malik K, Ahmad F, Gunister E. (2021) Drilling Performance of Natural Fiber Reinforced Polymer Composites: A Review. J. Nat. Fibers, 1-19.
Maurya AK, Gogoi R, Manik G (2021) Study of the Moisture Mitigation and Toughening Effect of Fly‐ash Particles on Sisal Fiber‐Reinforced Hybrid Polypropylene Composites. J Polym Environ:1-16.
Mohanta N, Acharya SK (2016) Fiber surface treatment: Its effect on structural, thermal, and mechanical properties of Luffa cylindrica fiber and its composite. J. Compos. Mater 50:3117-3131.
Pailoor S, Murthy HN, Sreenivasa, TN. (2021) Drilling of in-line compression molded jute/polypropylene composites. J. Nat. Fibers, 18: 91-104.
Panchal M, Raghavendra G, Prakash MO, Ojha S, Bose PSC (2018) Moisture absorption behavior of treated and untreated eggshell particulate epoxy composites. Silicon 10:859-867.
Panchal M, Raghavendra G, Prakash MO, Ojha S, Bose PSC (2018) Moisture absorption behavior of treated and untreated eggshell particulate epoxy composites. Silicon, 10:859-867.
Pankaj, Jawalkar CS, Kant S (2021). Critical Review on Chemical Treatment of Natural Fibers to Enhance Mechanical Properties of Bio Composites. Silicon, 1-22. https://doi.org/10.1007/s12633-021-01194-1
Patnaik TK, Nayak SS (2018) Development of silicon carbide reinforced jute epoxy composites: Physical, mechanical and thermo-mechanical characterizations. Silicon 10:137-145.
Paul R, Gouda K, Bhowmik S (2020) Effect of Different Constraint on Tribological Behaviour of Natural Fibre/Filler Reinforced Polymeric Composites: a Review. Silicon 2020:1-23.
Pires C, Motta LADC, Ferreira RADR, Caixeta CDO, Savastano H (2020) Thermomechanical and Thermo-hydro-mechanical Treatments of Luffa Cylindrical Fibers. J. Nat. Fibers: 1-13.
Pokhriyal M, Prasad L, Raturi HP (2018) An experimental investigation on mechanical and tribological properties of Himalayan nettle fiber composite. J. Nat. Fibers, 15:752-761.
Prakash MO, Raghavendra G, Panchal M, Ojha S, Bose PSC (2018) Influence of distinct environment on the mechanical characteristics of Arhar fiber polymer composites. Silicon, 10:825-830.
Ramasubbu R, Madasamy (2020) Fabrication of Automobile Component Using Hybrid Natural Fiber Reinforced Polymer Composite. J. Nat. Fibers: 1-11.
Ramesh P, Prasad BD, Narayana KL (2020) Influence of montmorillonite clay content on thermal, mechanical, water absorption and biodegradability properties of treated kenaf fiber/PLA-hybrid biocomposites. Silicon 13:109-118.
Rashid B, Leman Z, Jawaid M, Ghazali MJ, Ishak MR (2016) The mechanical performance of sugar palm fibres (ijuk) reinforced phenolic composites. Int J Precis Eng Manuf 17:1001-1008.
Ray D, Sarkar BK (2001) Characterization of alkali‐treated jute fibers for physical and mechanical properties. J. Appl. Polym. Sci 80:1013-1020.
Reddy PV, Mohana Krishnudu D, Rajendra Prasad P (2019) A study on alkali treatment influence on prosopis juliflora fiber-reinforced epoxy composites. J. Nat. Fibers: 1-13.
Rezghi Maleki H, Hamedi M, Kubouchi M, Arao Y. (2019) Experimental investigation on drilling of natural flax fiber-reinforced composites. Mater. Manuf. Process, 34:283-292.
Saha P, Manna S, Chowdhury SR, Sen R, Roy D, Adhikari B (2010) Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatment. Bioresour. Technol, 101:3182-3187.
Sivasubramanian P, Mayandi K, Santulli C, Alavudeen A, Rajini N (2020) Effect of Fiber Length on Curing and Mechanical Behavior of Pineapple Leaf Fiber (PALF) Reinforced Natural Rubber Composites. J. Nat. Fibers:1-12.
Srivastava N, Rastogi D, (2018) Nettle fiber: Himalayan wonder with extraordinary textile properties. Int. J. Home Sci 4:281-285.
Suriani MJ, Rapi HZ, Ilyas RA, Petrů M, Sapuan SM (2021) Delamination and Manufacturing Defects in Natural Fiber-Reinforced Hybrid Composite: A Review. Polymers 13:1323.
Suriani MJ, Rapi HZ, Ilyas RA, Petrů M, Sapuan SM. (2021). Delamination and Manufacturing Defects in Natural Fiber-Reinforced Hybrid Composite: A Review. Polymers, 13: 1323.
Viju S, Thilagavathi G (2019) Oil spill cleanup by bonded nettle fibrous mat. J. Inst. Eng. India Ser. E 100:93-100.