[1] LI Lun. Radiation Dose Monitor System for CSNS[J]. Nuclear Electronics & Detection Technology, 2018, 38(6) :764-768.
[2] Y Jeong, D Lee, K Kim, et al. A wearable robotics arm with high force-reflection capability. Proceedings of the IEEE International Workshop on Robot and Human Interactive Communication, Osaka, Japan, September 27–29, 2000: 27–29.
[3] Wang Guofeng. Application of DB in the preassembling and pre-alignment of BEPCII[J]. URBAN GEOTECHNICAL INVESTIGATION & SURVEYING, 2008(1):112-115.
[4] Huang Zhencang. Inter-changeability and technology measurement[M]. Guangzhou: Southchina University of Technology Press, 2005:76-88.
[5] Nanyan Shen. A practical method of improving hole position accuracy in the robotic drilling process[J]. The International Journal of Advanced Manufacturing Technology, 2018 (9): 2973-2987.
[6] Yang zhen, Li Guangyun, He Liu. Measurement methods and precision analysis of optical collimation[J]. INFRARED AND LASER ENGINEERING, 2011,40(2):282-286.
[7] Ni jian, Tian Ruiqing. Positioning structure reliability technique of marine feed pump rotor pump impeller[J]. China Heavy Equipment, 2019(3):43-48.
[8] Shi Wen. Metal material and heat treatment[M]. Shanghai: Shanghai technology Press, 2011:14-26.
[9] Ma Jijun, Yang Shuai, Yu Jinming. Fatigue strength analysis of C groove structure of a-alloy train body under vibration load of suspension equipment[J]. Journal of Dalian Jiaotong University, 2015, 36(5) :26-29.
[10] Maciej Malicki. The impact of damage in anneling inconel 718 on hardness measured by tvickers method[J]. Fatigue of Aircraft Structures, 2016, 8:92-96.
[11] Zhu Qianhao, Ma Su. Heat treatment of large-sized AISI 4150H steel gear ring[J]. Heat Treatment, 2018, 33(6) :44-48.
[12] Shao Yujia, Yang Zhaojing, Wang Lingqi. Effect of hardening process on microstructure and hardness of high-nitrogen 40Cr15Mo2VN steel[J]. Heat Treatment, 2019, 34(2) :31-33, 36.
[13] Xue Shun, Tian Jun, Wang Wenhu, et al. Continuous cooling transformation curve and heat treatment process of a new type of spring steel used for high speed railway[J]. Hot Working Technology, 2013, 42(16) :176-179.
[14] A. Boudilmi, K. Loucif. Modelling of thin films Hardness measured by a spherical indenter[J]. METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2018, 40(12) :1689-1697.
[15] da Silva Andrade Breno Henrique. Effects of annealing temperature on thermodynamic parameters and mechanical properties of a Cu-Al-Be-Nb-Ni-Cr alloy[J]. Materials letters, 2021, 302:1-4.
[16] Zixi Fang, Zezhong C Chen, et al. Simultaneous calibration of probe parameters and location errors of rotary axes on multi-axis machine tolls by inspecting a sphere[J]. Measurement, 2021, doi: https://doi.org/10.1016/j.measurement.2021.110389.
[17] Le Thi.Nhung. Effect of temperature on δ-Ferrite morphology of carbon steel and austenitic stainless steel welds [J]. Materials Science Forum, 2021, 6042(2068) :23-32.
[18] Hu Dongfang. The control of machining errors of tool path for unequal diameter flank milling of globoidal cam[J]. The International Journal of Advanced Manufacturing Technology, 2021, 113(9) :2999-3009.
[19] Ren Jie. In-beam g-rays of back-streaming white neutron source at China Spallation Neutron Source[J]. Acta Physica Sinica, 2020, 69(17) :233-241.
[20] Dongfang Hu. Tool path optimization algorithm of spatial cam flank milling based on NURBS surface[J]. Journal of the Brazilian Society of Mechanical and Engineering, 2018(40):1-8.
[21] Gao Jian, Chen Yueping, Deng Haixiang. In-situ inspection error compensation for machining accuracy improvement of complex components[J]. Journal of Mechanical Engineering, 2013, 49(9):133-143.