[1]DU Yu-zhou, LIU Dong-jie, GE Yan-feng,JIANG Bai-ling(2020) Effects of deformation parameters on microstructure and texture of Mg-Zn-Ce alloy.Transactions of Nonferrous Metals Society of China 30: 2658-2668 https://doi.org/10.1016/S1003-6326(20)65410-3
[2]Liu D, Liu ZY,Wang ED(2015) Evolution of twins and texture and its effects on mechanical properties of AZ31 magnesium alloy sheets under different rolling process parameters[J]. Trans Nonferrous Metals Soc China 25(11):3585–3594
https://doi.org/10.1016/S1003-6326(15)63999-1
[3] Ding Y.L,Wang J.G,Zhao M,Ju D.Y.(2018)Effect of annealing temperature on joints of diffusion bonded Mg/Al alloy.Transactions of Nonferrous Metals Society of China 28(2):251-258.https://doi.org/10.1016/S1003-6326(18)64658-8
[4] Tian,Y.,Hu,H.,Zhang,D.(2021)A novel severe plastic deformation method for manufacturing Al/Mg bimetallic tube. Int J Adv Manuf Technol 116:2569-2575
https://doi.org/10.1007/s00170-021-07513-5
[5] Huang H, Liu H,Wang C, Sun J, Bai J, Xue F, Jiang J, Ma A (2019) Potential of multipass ECAP on improving the mechanical properties of a high-calcium-content Mg-Al-Ca-Mn alloyJournal of Magnesium and Alloys(7):617–627
https://doi.org/10.1016/j.jma.2019.04.008
[6]GUO LL, FU F (2018) Effect of deformation mode, dynamic recrystallization
and twinning on rolling texture evolution of AZ31 magnesium alloy. Trans Nonferrous Metals Soc China 28:1094-1102 https://doi.org/10.1016/S1003-6326(18)64745-4
[6] Chen, Q., Zhang, X., Lin, J.,Zhan H.,Zhao Z.,Xie Z.,Yuan B.(2019)Isothermal closed-die forming process of magnesium alloy upper receiver: numerical simulation and experiments. Int J Adv Manuf Technol 102:685–694 https://doi.org/10.1007/s00170-018-03209-5
[8]Iwaszko,J.,Kudła,K.(2021)Microstructure, hardness, and wear resistance of AZ91 magnesium alloy produced by friction stir processing with air-cooling.Int J Adv Manuf Technol 116: 1309-1323 https://doi.org/10.1007/s00170-021-07474-9
[9]Öğüt, S., Kaya, H., Kentli, A. ,Uar M(2021)Applying hybrid equal channel angular pressing (HECAP) to pure copper using optimized Exp.-ECAP die.Int J Adv Manuf Technol 116:3859-3876 https://doi.org/10.1007/s00170-021-07717-9
[10]LI Xin , JIANG Jing-hua , ZHAO Yong-hao , MA Ai-bin , Dao-jing WEN, Yun-tian ZHU(2015)Effect of equal-channel angular pressing and aging on corrosion behavior of ZK60 Mg alloy.Transactions of Nonferrous Metals Society of China25(12):3909-3920 https://doi.org/10.1016/S1003-6326(15)64038-9
[11]AHMADI Siroos,ALIMIRZALOO Vali,FARAJI Ghader,DONIAVI Ali(2021)Properties inhomogeneity of AM60 magnesium alloy processed by cyclic extrusion compression angular pressing followed by extrusion.Transactions of Nonferrous Metals Society of China21(3):65527-65529
https://doi.org/10.1016/S1003-6326(21)65527-9
[12]Önder AYER(2019)A.forming load analysis for extrusion process of AZ31 magnesium. Transactions of Nonferrous Metals Society of China 29(4) :741-753 https://doi.org/10.1016/S1003-6326(19)64984-8
[13]Yang Yan , Xiong Xiaoming,Chen Jing,Peng Xiaodong ,Chen Daolun , Pan Fusheng (2021)Research advances in magnesium and magnesium alloys worldwide in 2020. Journal of Magnesium and Alloys 9(3):705-747 https://doi.org/10.1016/j.jma.2021.04.001
[14]KUMAR S. DHARANI & KUMAR S. SURESH.(2021)Effect of heat treatment conditions on ballistic behaviour of various zones of friction stir welded magnesium alloy joints[J]. Transactions of Nonferrous Metals Society of China(1)
https://doi.org/10.1016/S1003-6326(20)65484-X
[15]Ji, YF., Duan, JR., Li, HY.,Liu YM,Peng W,Ma LF(2021)Improvement of edge crack damage of magnesium alloy by optimizing the edge curve during cross variable thickness rolling. Int J Adv Manuf Technol 112:1993-2002 https://doi.org/10.1007/s00170-020-06517-x
[16]AHMADI Siroos,ALIMIRZALOO Vali,FARAJI Ghader & DONIAVI Ali(2021)Properties inhomogeneity of AM60 magnesium alloy processed by cyclic extrusion compression angular pressing followed by extrusion.Transactions of Nonferrous Metals Society of
China21(3):65527-65529.https://doi.org/10.1016/S1003-6326(21)65527-9
[17]DU Pei-hua,SHUSAKU F, TSUYOSHI F.(2020)Microstructure and performance of biodegradable magnesium alloy Tubes fabricated by Local-heating-assisted dieless drawing.Journal of Magneisum and Alloys 8(3):614-623
https://doi.org/10.1016/j.jma.2020.05.009
[18] Huang J. F.,Song G.L,Zhu Y. X,Zheng D. J,Wang Z.M.(2021)The anodically polarized Mg surface products and accelerated hydrogen evolution,Journal of Magnesium and Alloys
https://doi.org/10.1016/j.jma.2021.05.008
[19] Yuan X, Zhang J,LianY.,DuC,Xu W(2018)Research progress of residual stress determination in magnesium alloys, Journal of Magnesium and Alloys(6):238-244
https://doi.org/10.1016/j.jma.2018.06.002
[20] YANG Xia-wei ,FENG Wu-yuan ,LI Wen-ya,YAO Shuo-tian (2019)Microstructure and properties of probeless friction stir spot welding of AZ31 magnesium alloy joints.Transactions of Nonferrous Metals Society of China(11), doi:10.1016/S1003-6326(19)65136-8.
[21] Li, X.B., Li, F. & Li, X.W.(2018)Effect of different temperatures on deformation characteristics of AZ31 magnesium alloy by continuous variable cross-section direct extrusion. Int J Adv Manuf Technol 95:4623–4628 https://doi.org/10.1007/s00170-017-1557-6
[22]Wu, S., Sun, T., Shen, Y.,Yan Y, Ni R, Liu W(2021)Conventional and swing friction stir spot welding of aluminum alloy to magnesium alloy. Int J Adv Manuf Technol 116: 2401–2412 https://doi.org/10.1007/s00170-020-06548-4
[23]GUO F,ZHANG D.F,YANG X.S(2015)Microstructure and texture evolution of AZ31 magnesium alloy during large strain hot rolling.Transactions of Nonferrous Metals Society of China25 (01): 14-21 https://doi.org/10.1016/S1003-6326(15)63573-7
[24]Campanella, D., Buffa, G., Lo Valvo, E. et al.(2021) A numerical approach for the modelling of forming limits in hot incremental forming of AZ31 magnesium alloy. Int J Adv Manuf Technol 114:3229–3239 . https://doi.org/10.1007/s00170-021-07059-6
[25]Tian Y, Hu HJ, Zhang DF (2021) A novel severe plastic deforma-
tion method for manufacturing Al/Mg bimetallic tube, Int J Adv Manuf Technol 2021 https://doi.org/10.1007/s00170-021-07513-5.
[26]Moradnezhad, S., Razaghian, A., Taghiabadi, R. et al.(2019)Effect of Ca additions on evolved microstructures and subsequent mechanical properties of a cast and hot-extruded Mg–Zn–Zr magnesium alloy. Int J Adv Manuf Technol 104:4265-4275. https://doi.org/10.1007/s00170-019-04260-6
[27]Wang, Y.P., Li, F., Li, X.W.(2020)Effect of extrusion ratio (λ) on dynamic recrystallization of AZ31 magnesium alloy bending products prepared by staggered extrusion (SE). Int J Adv Manuf Technol 108:289–297. https://doi.org/10.1007/s00170-020-05416-5
[28]Han, S., Li, Z., Wang, Z.,Li Y (2021) Review on joining processes of magnesium alloy sheets. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-021-07981-9
[29]Wang, Y., Li, F., Li, X.W,Fang,W.B.(2019)Process model and experimental analysis of circumferential extending extrusion forming for magnesium alloy sheet. Int J Adv Manuf Technol 102:1547–1556 . https://doi.org/10.1007/s00170-018-03232-6
[30]Xia X.S,Chen Q,Li H ,Tan Y.J (2018) Hot forging process design, microstructure, and mechanical properties of cast Mg–Zn–Y–Zr magnesium alloy tank cover. Int J Adv Manuf Technol 94:4199–4208. https://doi.org/10.1007/s00170-017-1146-8