[1] A. Shrivastava, A. Amin, B. Sood, M. Azarian, M. Pecht, M. Zagami, M. Frederick, Thick film resistor failures, Proceeding of the 34rd International Symposium for Testing and Failure Analysis, (2008) 197-205.
[2] D. Ortolino, J. Kita, K. Beart, R. Wurm, S. Kleinewig, A. Pletsch, R. Moos, Failure of electrical vias manufactured in thick-film technology when loaded with short high current pulses, Microelectron Reliab, 56 (2016) 121-128.
[3] N. White, Thick Films, in: S. Kasap, P. Capper (Eds.) Springer Handbook of Electronic and Photonic Materials, Springer International Publishing, Cham, (2017) 711-713.
[4] Y. Imanaka, Multilayered low temperature cofired ceramics (LTCC) technology, Springer Science & Business Media (2005), 83-100.
[5] M. Hrovat, Z. Samardžija, J. Holc, D. Belavič, The development of microstructural and electrical characteristics in some thick-film resistors during firing, J. Mater. Sci., 37 (2002) 2331-2339.
[6] M. Hrovat, J. Holc, M. Jakubowska, K. Kielbasinski, K. Makarovič, D. Belavič, Subsolidus phase equilibria in the CaO-poor part of the RuO2–CaO–SiO2 system, Mater. Res. Bull., 45 (2010) 2040-2043.
[7] C.-J. Ting, Interactions between Ruthenia-Based Resistors and Cordierite-Glass Substrates in Low-Temperature, J. Am. Ceram. Soc., 83 (2000) 2945-2954.
[8] M. Hrovat, Z. Samardzija, J. Holc, D. Belavic, Microstructural, XRD and electrical characterization of some thick film resistors, J. Mater. Sci. Mater. Electron., 11 (2000) 199-208.
[9] A. Alessandrini, G. Valdrè, B. Morten, M. Prudenziati, Electric force microscopy investigation of the microstructure of thick film resistors, J. Appl. Phys., 92 (2002) 4705-4711.
[10] A.W. Stadler, A. Kolek, Z. Zawiślak, K. Mleczko, M. Jakubowska, K.R. Kiełbasiński, A. Młożniak, Noise properties of Pb/Cd-free thick film resistors, J. Phys. D: Appl. Phys., 43 (2010) 265401.
[11] S. Achmatowicz, M. Jakubowska, E. Zwierkowska, M. Primovitch, Low Cost, Thick Film Resistive Compositions without the Use of Noble Metals, Microelectron. Int., 12 (1995) 23-25.
[12] A.D. Garje, R.C. Aiyer, Effect of firing temperature on electrical and gas‐sensing properties of nano‐SnO2‐based thick‐film resistors, Int. J. Appl. Ceram. Technol, 4 (2007) 446-452.
[13] F. Zhang, G. Duan, L. Cao, D.a. Yang, Z. Liu, Preparation and properties of antioxidative BaO–B2O3–SiO2 glass-coated Cu powder for copper conductive film on LTCC substrate, J. Mater. Sci. Mater. Electron., 29 (2018) 130-137.
[14] T. Rovensky, A. Pietrikova, I. Vehec, L. Livovsky, Stability of miniaturized non-trimmed thick- and thin-film resistors, Microelectron Reliab, 84 (2018) 88-94.
[15] P.T. Long, T. Manh, T. Ho, V. Dongquoc, P. Zhang, S. Yu, Magnetocaloric effect in La1-xSrxCoO3 undergoing a second-order phase transition, Ceram. Int., 44 (2018) 15542-15549.
[16] K. Iwasaki, T. Ito, T. Nagasaki, Y. Arita, M. Yoshino, T. Matsui, Thermoelectric properties of polycrystalline La1−xSrxCoO3, J. Solid State Chem., 181 (2008) 3145-3150.
[17] H. Kozuka, K. Ohbayashi, K. Koumoto, Electronic conduction in La-based perovskite-type oxides, Sci. Technol. Adv. Mater., 16 (2015) 026001.
[18] A. Chrzan, S. Ovtar, P. Jasinski, M. Chen, A. Hauch, High performance LaNi1-xCoxO3-δ (x = 0.4 to 0.7) infiltrated oxygen electrodes for reversible solid oxide cells, J. Power Sources, 353 (2017) 67-76.
[19] V. Vulchev, L. Vassilev, S. Harizanova, M. Khristov, E. Zhecheva, R. Stoyanova, Improving of the thermoelectric efficiency of LaCoO3 by double substitution with nickel and iron, J. Phys. Chem. C, 116 (2012) 13507-13515.
[20] P. Migiakis, J. Androulakis, J. Giapintzakis, Thermoelectric properties of LaNi1-xCoxO3 solid solution, J. Appl. Phys., 94 (2003) 7616-7620.
[21] A. Mineshige, M. Inaba, T. Yao, Z. Ogumi, K. Kikuchi, M. Kawase, Crystal structure and metal–insulator transition of La1− xSrxCoO3, J. Solid State Chem., 121 (1996) 423-429.
[22] B. Liu, Y. Wang, G. Liu, H. Feng, H. Yang, J. Sun, Electrical transport properties of La1−xSrxCoO3 thin films, J. Appl. Phys., 120 (2016) 154103.
[23] H. Kozuka, K. Ohbayashi, K. Koumoto, LaCo1-xNixO3 with Improved Electrical Conductivity, Inorg. Chem., 51 (2012) 9259-9264.
[24] V. Kumar, R. Kumar, D. Shukla, S. Gautam, K. Hwa Chae, R. Kumar, Electronic structure and electrical transport properties of LaCo1-xNixO3 (0≤x≤0.5), J. Appl. Phys., 114 (2013) 073704.
[25] Y. Lu, Y. Li, D. Chen, R. Peng, Q. Yang, H. Su, Z. Tao, S. Zhang, Experimental and theoretical study on enhanced electrical properties of nickel-substituted La0.5Sr0.5CoO3-δ ceramics, J. Eur. Ceram. Soc., 40 (2020) 3049-3056.
[26] J. Androulakis, J. Giapintzakis, Magnetoresistance in LaNi1-xCoxO3 (0.3≤x≤0.6), Physica. B., 405 (2010) 107-112.
[27] Y. Lu, Y. Li, D. Chen, R. Peng, Q. Yang, H. Su, S. Zhang, The sintering and electrical properties of Zn-substituted LaCo0.4Ni0.6O3 ceramics based upon experiments and calculations, Ceram. Int., (2020).
[28] I. Kagomiya, S. Matsumoto, K.-i. Kakimoto, H. Ohsato, H. Sakai, Y. Maeda, Controlling temperature coefficient of resistivity in La1−xSrxMnO3 ceramics, Mater. Lett., 63 (2009) 2452-2455.
[29] R. Peng, Y. Li, G. Yu, Y. Lu, S. Li, Effect of Co2+ Substitution on the Microwave Dielectric Properties of LiZnPO4 Ceramics, J. Electron. Mater., 47 (2018) 7281-7287.
[30] J. Tang, R. Dass, A. Manthiram, Comparison of the crystal chemistry and electrical properties of La2−xAxNiO4 (A = Ca, Sr, and Ba), Mater. Res. Bull., 35 (2000) 411-424.
[31] H. Chen, Y. Lu, W. Hwang, Characterization of sputtered NiO thin films, Surf. Coat. Technol., 198 (2005) 138-142.
[32] J. Ma, M. Theingi, Q. Chen, W. Wang, X. Liu, H. Zhang, Influence of synthesis methods and calcination temperature on electrical properties of La1-xCaxMnO3 (x=0.33 and 0.28) ceramics, Ceram. Int., 39 (2013) 7839-7843.
[33] D. Li, Q. Chen, Z. Li, Y. Li, H. Zhang, Y. Zhang, Effects of silver doping on structure and electrical properties of La0.67Ca0.23K0.1MnO3 polycrystalline ceramic, Ceram. Int., 44 (2018) 3448-3453.
[34] R. Peng, Y. Li, Y. Lu, Y. Yun, W. Du, Z. Tao, B. Liao, High-performance microwave dielectric composite ceramics sintered at low temperature without sintering-aids, J. Alloys Compd., 831 (2020) 154878.