ASCE/SEI 7-10, (2010). Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers.
Anagnostopoulos, S.A. and Spiliopoulos, K.V., (1992). An investigation of earthquake induced pounding between adjacent buildings. Earthquake engineering & structural dynamics, 21(4), pp.289-302.
Anagnostopoulos, S.A., (1988). Pounding of buildings in series during earthquakes. Earthquake engineering & structural dynamics, 16(3), pp.443-456.
Barros, R.C., Naderpour, H., Khatami, S.M. and Mortezaei, A., (2013). Influence of seismic pounding on RC buildings with and without base isolation system subject to near-fault ground motions. Journal of Rehabilitation in Civil Engineering, 1(1), pp.39-52.
Chitte, C.J., Jadhav, A.S. and Kumavat, H.R., (2014). Seismic Pounding Between Adjacent Building Structures Subjected to Near Field Ground Motion. International Journal of Research in Engineering and Technology, 3, pp.53-62.
Cole, G., Dhakal, R., Carr, A. and Bull, D., (2010). Interbuilding pounding damage observed in the 2010 Darfield earthquake. Bulletin of the New Zealand Society for Earthquake Engineering, 43(4), pp.382-386.
Cole, G.L., Dhakal, R.P. and Turner, F.M., (2012). Building pounding damage observed in the 2011 Christchurch earthquake. Earthquake Engineering & Structural Dynamics, 41(5), pp.893-913.
Dimitrakopoulos, E., Makris, N. and Kappos, A. J., (2009). Dimensional analysis of the earthquake‐induced pounding between adjacent structures. Earthquake Engineering & Structural Dynamics, 38(7), 867-886.
Elwardany, H., Seleemah, A. and Jankowski, R., (2017). Seismic pounding behavior of multi-story buildings in series considering the effect of infill panels. Engineering Structures, 144, pp.139-150.
Elwardany H., Seleemah A., Jankowski R. and El-Khoriby S., (2019). Influence of soil-structure interaction on seismic pounding between steel frame buildings considering the effect of infill panels. Bulletin of Earthquake Engineering, 17(11), 6165-6202.
FEMA (Federal Emergency Management Agency). (2012). “Hazus-MH 2.1–Earthquake model user manual.” Washington, DC, 863
FEMA P-695, (2009). Recommended methodology for quantification of building system performance and response parameters. Prepared by the Applied Technology Council, Redwood, CA.
Fujii, K. and Sakai, Y., (2018). Shaking table test of adjacent building models considering pounding. Seismic Resistant Structures, 173.
Hadianfard, M.A. and Gadami, M., (2012). Seismic demand of steel structures with mass irregularity. Journal of Engineering and Technology, Vol. 1, No. 3, 135-154.
Haselton, C. B. (2006). Assessing seismic collapse safety of modern reinforced concrete moment frame buildings (Doctoral dissertation, Stanford University).
Haselton, C.B., Liel, A.B., Deierlein, G.G., Dean, B.S. and Chou, J.H., (2011). Seismic collapse safety of reinforced concrete buildings. I: Assessment of ductile moment frames. Journal of Structural Engineering, 137(4), pp.481-491.
Hosseini S.H., Naderpour H., Vahdani R. and Jankowski R., (2021). Evaluation of pounding effects between reinforced concrete frames subjected to far-field earthquakes in terms of damage index. Bulletin of Earthquake Engineering, published online: 28 October 2021, DOI: 10.1007/s10518-021-01259-x.
Hudson, D.E. and Housner, G. W. (1958). An analysis of strong-motion accelerometer data from the San Francisco earthquake of March 22, 1957. Bulletin of the seismological society of America, 48(3), 253-268.
Ibarra, L.F., Medina, R.A. and Krawinkler, H., (2005). Hysteretic models that incorporate strength and stiffness deterioration. Earthquake engineering & structural dynamics, 34(12), pp.1489-1511.
Inel, M., Ozmen, H.B. and Akyol, E., (2013). Observations on the building damages after 19 May 2011 Simav (Turkey) earthquake. Bulletin of Earthquake Engineering, 11(1), pp.255-283.
Jankowski, R.,(2008). Earthquake-induced pounding between equal height buildings with substantially different dynamic properties. Engineering structures, 30(10), pp.2818-2829.
Kasai, K. and Maison, B.F., (1997). Building pounding damage during the 1989 Loma Prieta earthquake. Engineering structures, 19(3), pp.195-207.
Kazemi F., Miari M. and Jankowski R., (2021). Investigating the effects of structural pounding on the seismic performance of adjacent RC and steel MRFs. Bulletin of Earthquake Engineering, 19(1), 317-343.
Kharazian, A. and López-Almansa, F., (2019). State-of-the-art of research on seismic pounding between buildings with aligned slabs. Archives of Computational Methods in Engineering, 26(2), pp.327-345.
Khatami, S., Naderpour, H. and Barros, R., (2014). A new theory of pounding between two bodies considering link element by having nonlinear stiffness of spring. Second European Conference on Earthquake Engineering and Seismology, Istanbul, Aug. 25-29.
Khatami, S.M., Naderpour, H., Barros, R.C., Jakubczyk-Gałczyńska, A. and Jankowski, R., (2020). Determination of peak impact force for buildings exposed to structural pounding during earthquakes. Geosciences, 10(1), 18.
Miari M., Choong K.K. and Jankowski R., (2021). Seismic pounding between bridge segments: a state-of-the-art review. Archives of Computational Methods in Engineering, 28(2), 495-504.
Miari M. and Jankowski R., (2021). Incremental dynamic analysis and fragility assessment of buildings founded on different soil types experiencing structural pounding during earthquakes. Engineering Structures, 113118, published online: 23 October 2021, DOI: 10.1016/j.engstruct.2021.113118.
Naderpour, H., Barros, R.C., Khatami, S.M. and Jankowski, R., (2016). Numerical study on pounding between two adjacent buildings under earthquake excitation. Shock and Vibration, 2016, 1504783.
Naderpour, H., Khatami, S.M. and Barros, R.C., (2017). Prediction of critical distance between two MDOF systems subjected to seismic excitation in terms of artificial neural networks. Periodica Polytechnica Civil Engineering, 61(3), pp.516-529.
OpenSees (2009). Open System for Earthquake Engineering Simulation. Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, CA, 〈http://opensees.berkeley.edu/〉.
Pant, D.R., Wijeyewickrema, A.C. and Ohmachi, T., (2010). Seismic pounding between reinforced concrete buildings: A study using two recently proposed contact element models. Proceedings of the 14ECEE, Ohrid, Macedonia.
Polycarpou, P.C. and Komodromos, P., (2010). Earthquake-induced poundings of a seismically isolated building with adjacent structures. Engineering Structures, 32(7), pp.1937-1951.
Rezaei H., Moayyedi S.A. and Jankowski R., (2020). Probabilistic seismic assessment of RC box-girder highway bridges with unequal-height piers subjected to earthquake-induced pounding. Bulletin of Earthquake Engineering, 18(4), 1547-1578.
Rigi, A., JavidSharifi, B., Hadianfard, M.A. and Yang, T.Y., (2021). Study of the seismic behavior of rigid and semi-rigid steel moment-resisting frames. Journal of Constructional Steel Research, 186, 106910.
Romão, X., Costa, A.A., Paupério, E., Rodrigues, H., Vicente, R., Varum, H. and Costa, A., (2013). Field observations and interpretation of the structural performance of constructions after the 11 May 2011 Lorca earthquake. Engineering Failure Analysis, 34, 670-692.
Rosenblueth, E. and Meli, R., (1986). The earthquake of 19 September 1985: Effects in Mexico City. Concrete International, 8, pp.23-34.
Sołtysik B., Falborski T. and Jankowski R., (2017). Preventing of earthquake-induced pounding between steel structures by using polymer elements – experimental study. Procedia Engineering, 199, 278-283.
Vamvatsikos, D. and Cornell, C. A., (2002). Incremental dynamic analysis. Earthquake engineering & structural dynamics, 31(3), 491-514