1. Wang, S. et al. Skin electronics from scalable fabrication of an intrinsically stretchable transistor array. Nature 555, 83–88 (2018).
2. Ma, Z. et al. Permeable superelastic liquid-metal fibre mat enables biocompatible and monolithic stretchable electronics. Nat. Mater. 20, 859–868 (2021).
3. Jung, D. et al. Highly conductive and elastic nanomembrane for skin electronics. Science 1026, 1022–1026 (2021).
4. Liu, S., Shah, D. S. & Kramer-Bottiglio, R. Highly stretchable multilayer electronic circuits using biphasic gallium-indium. Nat. Mater. 20, 851–858 (2021).
5. Lv, G. et al. Flexible, Conformable Organic Semiconductor Proximity Sensor Array for Electronic Skin. Adv. Mater. Interfaces 7, 2000306 (2020).
6. Sempionatto, J. R. et al. An epidermal patch for the simultaneous monitoring of haemodynamic and metabolic biomarkers. Nat. Biomed. Eng. 5, 737–748 (2021).
7. Qi, D. et al. Highly Stretchable Gold Nanobelts with Sinusoidal Structures for Recording Electrocorticograms. Adv. Mater. 27, 3145–3151 (2015).
8. Xu, L. et al. 3D multifunctional integumentary membranes for spatiotemporal cardiac measurements and stimulation across the entire epicardium. Nat. Commun. 5, 3329 (2014).
9. Markvicka, E. et al. ElectroDermis. in Proceedings of the 2019 CHI Conference on Human Factors in Computing Systems 632 (ACM, 2019). doi:10.1145/3290605.3300862.
10. Yoon, J. et al. Soft Modular Electronic Blocks (SMEBs): A Strategy for Tailored Wearable Health-Monitoring Systems. Adv. Sci. 6, 1801682 (2019).
11. Ahn, B. Y. et al. Omnidirectional printing of flexible, stretchable, and spanning silver microelectrodes. Science 323, 1590–1593 (2009).
12. Zhang, B. et al. One-Step Sub-micrometer-Scale Electrohydrodynamic Inkjet Three-Dimensional Printing Technique with Spontaneous Nanoscale Joule Heating. ACS Appl. Mater. Interfaces 9, 29965–29972 (2017).
13. Zhou, N., Liu, C., Lewis, J. A. & Ham, D. Gigahertz Electromagnetic Structures via Direct Ink Writing for Radio‐Frequency Oscillator and Transmitter Applications. Adv. Mater. 29, 1605198 (2017).
14. Liashenko, I., Rosell-Llompart, J. & Cabot, A. Ultrafast 3D printing with submicrometer features using electrostatic jet deflection. Nat. Commun. 11, 753 (2020).
15. Kim, F. et al. Direct ink writing of three-dimensional thermoelectric microarchitectures. Nat. Electron. 4, 579–587 (2021).
16. Ladd, C., So, J. H., Muth, J. & Dickey, M. D. 3D printing of free standing liquid metal microstructures. Adv. Mater. 25, 5081–5085 (2013).
17. Gannarapu, A. & Gozen, B. A. Freeze-Printing of Liquid Metal Alloys for Manufacturing of 3D, Conductive, and Flexible Networks. Adv. Mater. Technol. 1, 1600047 (2016).
18. Wang, Y. et al. Printable Liquid-Metal@PDMS Stretchable Heater with High Stretchability and Dynamic Stability for Wearable Thermotherapy. Adv. Mater. Technol. 4, 1800435 (2019).
19. Park, Y.-G., An, H. S., Kim, J.-Y. & Park, J.-U. High-resolution, reconfigurable printing of liquid metals with three-dimensional structures. Sci. Adv. 5, eaaw2844 (2019).
20. Park, Y. G. et al. Three-Dimensional, High-Resolution Printing of Carbon Nanotube/Liquid Metal Composites with Mechanical and Electrical Reinforcement. Nano Lett. 19, 4866–4872 (2019).
21. Glickman, E., Levenshtein, M., Budic, L. & Eliaz, N. Interaction of liquid and solid gallium with thin silver films: Synchronized spreading and penetration. Acta Mater. 59, 914–926 (2011).
22. Oh, E. et al. Highly Reliable Liquid Metal–Solid Metal Contacts with a Corrugated Single-Walled Carbon Nanotube Diffusion Barrier for Stretchable Electronics. Adv. Funct. Mater. 28, 1806014 (2018).
23. Kramer, R. K., Boley, J. W., Stone, H. A., Weaver, J. C. & Wood, R. J. Effect of microtextured surface topography on the wetting behavior of eutectic gallium-indium alloys. Langmuir 30, 533–539 (2014).
24. Mohammed, M., Sundaresan, R. & Dickey, M. D. Self-Running Liquid Metal Drops that Delaminate Metal Films at Record Velocities. ACS Appl. Mater. Interfaces 7, 23163–23171 (2015).
25. Park, M. et al. Highly stretchable electric circuits from a composite material of silver nanoparticles and elastomeric fibres. Nat. Nanotechnol. 7, 803–809 (2012).
26. Sasaki, M. et al. Highly Conductive Stretchable and Biocompatible Electrode-Hydrogel Hybrids for Advanced Tissue Engineering. Adv. Healthc. Mater. 3, 1919–1927 (2014).
27. Chae, C. et al. 3D-stacked carbon composites employing networked electrical intra-pathways for direct-printable, extremely stretchable conductors. ACS Appl. Mater. Interfaces 7, 4109–4117 (2015).
28. Matsuhisa, N. et al. Printable elastic conductors with a high conductivity for electronic textile applications. Nat. Commun. 6, 7461 (2015).
29. Matsuhisa, N. et al. Printable elastic conductors by in situ formation of silver nanoparticles from silver flakes. Nat. Mater. 16, 834–840 (2017).
30. Kim, S. W., Kwon, S. N. & Na, S. I. Stretchable and electrically conductive polyurethane- silver/graphene composite fibers prepared by wet-spinning process. Compos. Part B Eng. 167, 573–581 (2019).
31. Tehrani, F. et al. Laser-Induced Graphene Composites for Printed, Stretchable, and Wearable Electronics. Adv. Mater. Technol. 4, 1900162 (2019).
32. Valentine, A. D. et al. Hybrid 3D Printing of Soft Electronics. Adv. Mater. 29, 1703817 (2017).
33. Kim, J. Y. et al. 3D printable composite dough for stretchable, ultrasensitive and body-patchable strain sensors. Nanoscale 9, 11035–11046 (2017).
34. Guo, S.-Z., Qiu, K., Meng, F., Park, S. H. & McAlpine, M. C. 3D Printed Stretchable Tactile Sensors. Adv. Mater. 29, 1701218 (2017).
35. Wu, Q., Zou, S., Gosselin, F. P., Therriault, D. & Heuzey, M. C. 3D printing of a self-healing nanocomposite for stretchable sensors. J. Mater. Chem. C 6, 12180–12186 (2018).
36. Parida, K. et al. Extremely stretchable and self-healing conductor based on thermoplastic elastomer for all-three-dimensional printed triboelectric nanogenerator. Nat. Commun. 10, 2158 (2019).
37. Lee, H. S. et al. Three-Dimensionally Printed Stretchable Conductors from Surfactant-Mediated Composite Pastes. ACS Appl. Mater. Interfaces 11, 12622–12631 (2019).
38. Hwang, Y. et al. Lubricant-Added Conductive Composite for Direct Writing of a Stretchable Electrode. ACS Appl. Mater. Interfaces 11, 48459–48465 (2019).
39. Yoon, I. S. et al. 3D Printing of Self‐Wiring Conductive Ink with High Stretchability and Stackability for Customized Wearable Devices. Adv. Mater. Technol. 4, 1900363 (2019).
40. Wu, W. et al. Synergistic combination of carbon-black and graphene for 3D printable stretchable conductors. Mater. Technol., 1–10 (2020).
41. Kang, Y. et al. High-Resolution Printable and Elastomeric Conductors from Strain-Adaptive Assemblies of Metallic Nanoparticles with Low Aspect Ratios. Small 16, 2004793 (2020).
42. Balberg, I. & Binenbaum, N. Computer study of the percolation threshold in a two-dimensional anisotropic system of conducting sticks. Phys. Rev. B 28, 3799–3812 (1983).
43. Nam, S. et al. Effects of silica particles on the electrical percolation threshold and thermomechanical properties of epoxy/silver nanocomposites. Appl. Phys. Lett. 99, 043104 (2011).
44. Ko, Y. et al. Stretchable Conductive Adhesives with Superior Electrical Stability as Printable Interconnects in Washable Textile Electronics. ACS Appl. Mater. Interfaces 11, 37043–37050 (2019).
45. Byun, J. et al. Fully printable, strain-engineered electronic wrap for customizable soft electronics. Sci. Rep. 7, 45328 (2017).
46. Byun, J. et al. A Single Droplet‐Printed Double‐Side Universal Soft Electronic Platform for Highly Integrated Stretchable Hybrid Electronics. Adv. Funct. Mater. 27, 1701912 (2017).