[1] Schatzker J, Sanderson R, Murnaghan JP. The holding power of orthopedic screws in vivo. Clin Orthop. 1975; 108: 115–126.
[2] Trader JE, Johnson RP, Kalbfleisch JH. Bone-mineral content, surface hardness, and mechanical fixation in the human radius. A correlative study. J Bone Joint Surg [Am] 1979; 61: 1217–1220.
[3] Scott Yerby, C. Corey Scott, Nathan J. Evans, et al. Effect of Cutting Flute Design on Cortical Bone Screw Insertion Torque and Pullout Strength. Journal of Orthopaedic Trauma. 2001; 15(3):216–221.
[4] Lawson KJ, Brems J. Effect of insertion torque on bone screw pullout strength. Orthopedics. 2001; 24:451–454.
[5] ASTM F543-13, Standard Specification and Test Methods for Metallic Medical Bone Screws. In: Annual Book of ASTM Standards. Section 13. Medical Devices and Services. American Society for Testing and Materials, 2016; pp: 127– 148.
[6] Thompson JD, Benjamin JB, Szivek JA. Pullout strengths of cannulated and noncannulated cancellous bone screws. Clin Orthop. 1997; 341: 241–249.
[7] Baumgart FW, Cordey J, Morikawa K, et al. AO/ASIF self-tapping screws (STS). Injury. 1993; 24: S1–7.
[8] Bickley MB, Hanel DP. Self-tapping versus standard tapped titanium screw fixation in the upper extremity. J Hand Surg [Am] 1998; 23: 308–311.
[9] Ansell RH, Scales JT. A study of some factors which affect the strength of screws and their insertion and holding power in bone. J Biomech. 1968;1:279–302.
[10] Boyle JMD, Frost DE, Foley WL, et al. Torque and pullout analysis of six currently available self-tapping and ‘emergency’ screws. J Oral Maxillofac Surg. 1993; 51: 45–50.
[11] Koranyi E, Bowman CE, Knecht CD, et al. Holding power of orthopedic screws in bone. Clin Orthop. 1970; 72: 283–286.
[12] Battula S, Schoenfeld AJ, Sahai V, et al. The effect of pilot hole size on the insertion torque and pullout strength of self-tapping cortical bone screws in osteoporotic bone. J Trauma. 2008; 64:990–995.
[13] Chapman JR, Harrington RM, Lee KM, et al. Factors affecting the pullout strength of cancellous bone screws. J Biomech Eng. 1996; 118:391–398.
[14] Evans M, Spencer M, Wang Q, et al. Design and testing of external fixator bone screws. J Biomed Eng. 1990; 12: 457–462.
[15] William M.R., Paul T, Timothy P, et al. A comparison of screw insertion torque and pullout strength. Journal of Orthopaedic Trauma. 2010, 24(3):374–378.
[16] Bechtol CO. Internal fixation with plates and screws. In: Metals and Engineering in Bone and Joint Surgery, ed by Bechtol CO, Ferguson AB, Lang PG. Baltimore, Williams and Wilkins, 1959.
[17] You ZH, Bell WH, Schneiderman ED, et al. Biomechanical properties of small bone screws. J Oral Maxillofac Surg. 1994; 52:1293– 1302.
[18] Thomas AD, David BH, Daniel JD, et al. Optimizing bone screw pullout force. Journal of Orthopaedic Trauma. 1990; 4(2):169–194.
[19] Murphy TP, Hill CM, Kapatkin AS, et al. Pullout properties of 3.5-mm AO/ASIF self-tapping and cortex screws in a uniform synthetic material and in canine bone. Vet Surg. 2001; 30: 253–260.
[20] Phillips JH, Rahn BA. Comparison of compression and torque measurements of self-tapping and pretapped screws. Plast Reconstr Surg. 1989; 83: 447–458.
[21] Radek C, Karel F, Frantisek S, et al. Analysis of locking self-taping bone screws for angularly stable plates. J. Med. Biol. Eng. 2017; 37: 612–625.