Lang Y, Tian CJ, Dai X, et al. Preparation of YSZ porous ceramics with precise porosity control. Int J Appl Ceram Tec 2020, DOI:10.1111/ijac.13431
 Eom JH, Kim YW, Raju S, Processing and properties of macroporous silicon carbide ceramics: a review. J Asian Ceram Soc 2013,1: 220-242
 Studart AR, Gonzenbach UT, Tervoort E, et al. Processing routes to macroporous ceramics: a review. J Am Ceram Soc 2006, 89: 1771–1789.
[4 Colombo P, Ceramic foams: fabrication, properties and applications. Key Eng Mater Trans Tech Pub 2002, 1913-1918.
 Colombo P, Conventional and novel processing methods for cellular ceramics. Philos. Trans 2006, 364: 109.
Li F, Huang X, Liu JX, Sol-gel derived porous ultra-high temperature ceramics. J Adv Ceram 2020, 9: 1-16.
Ye XL, Chen ZF, Ai SF, Porous SiC/melamine-derived carbon foam frameworks with excellent electromagnetic wave absorbing capacity. J Adv Ceram 2019, 8: 479-488
 Dresler M, Reinsch S, Schadrack R, et al. Burnout behavior of ceramic coated open cell polyurethane (PU) sponges. J Eur Ceram Soc 2009, 29: 3333–3339.
 Yao X, Yang Y, Liu X, et al. Effect of recoating slurry compositions on the microstructure and properties of SiC reticulated porous ceramics. J Eur Ceram Soc 2013, 33: 2909–2914.
 Alem A, Pugh MD, Drew RA, Open-cell reaction bonded silicon nitride foams: fabrication and characterization. J Eur Ceram Soc 2014, 34: 599–609.
 Xia Y, Zeng YP, Jiang D, Mechanical and dielectric properties of porous Si3N4 ceramics using PMMA as pore former. Ceram Int 2011, 37: 3775–3779.
 Zhang LY, Zhou DL, Chen Y, et al. Preparation of high open porosity ceramic foams via direct foaming molded and dried at room temperature. J Eur Ceram Soc 2014, 34:2443 2452.
 Ahmad R, Ha JH, Song IH, Particle-stabilized ultra-low density zirconia toughened alumina foams. J Eur Ceram Soc 2013, 33: 2559–2564.
 Fukushima M, Nakata M, Zhou Y, et al. Fabrication and properties of ultra highly porous silicon carbide by the gelation–freezing method. J Eur. Ceram Soc 2010, 30:2889-2896.
Ren JT, Ying W, Zhao J, et al. High-strength porous mullite ceramics fabricated from particle stabilized foams via oppositely charged dispersants and surfactants. Ceram Int 2019, 45: 6385-6391
Du ZP, Yao DX, Xia YF, et al. The high porosity silicon nitride foams prepared by the direct foaming method. Ceram Int 2019, 45: 2124-2130
Han L, Wang JK, Li FL, et al．Low-temperature preparation of Si3N4 whiskers bonded/reinforced SiC porous. J Eur Ceram Soc 2018, 38: 1210–1218
Liu jj, Huo WL, Zhang XY, et al. Optimal design on the high-temperature mechanical properties of porous alumina ceramics based on fractal dimension analysis. J Adv Ceram 2018, 7: 89-98.
Chen JJ, Chen JX, Zhang H, Microstructure and mechanical properties of h-BN/Yb4Si2O7N2 composites. J Adv Ceram 2018, 7: 317-324
Wang RZ, Wang S, Li DY, et al. Temperature dependence of the fracture strength of porous ceramic materials. Ceram Int 2020, 46:11311-11316
Ren JT, Ying W, Zhao J, et al. High-strength porous mullite ceramics fabricated from particle-stabilized foams via oppositely charged dispersants and surfactants. Ceram Int 2018, 10.1016/JceramInt2018.12.125
Deng XG, Ran SL, Han L, et al. Foam-gelcasting preparation of high-strength self-reinforced porous mullite ceramics. J Eur Ceram Soc 2017, 37: 4059–4066
Huo WL, Zhang XY, Chen YG, et al. Mechanical strength of highly porous ceramic foams with thin and lamellate cell wall from particle-stabilized foams. Ceram Int 2018, 44:5780-5784
Kim EH, Oh YS, Jung YG. Relationship between net work structure and fracture strength of ceramic core in a gel-casting process. Ceram Int 2015, 41: 3396–3399
Carolina T, Chayuda C, David ED, et al. Mechanical strength and damage to lerance of highly porous alumina ceramics produced from sintered particles tabilized foams. Ceram Int 2016, 42: 8478–8487
Hou DW, Li DY,Hua PC, et al. Statistical modelling of compressive strength controlled by porosity and pore size distribution for cementitious materials. Ceram Int 2018, 10.1016/Jcemconcomp.2018.10.012
Lang Y, Zhao L, Dai X, et al. Preparation of porous YSZ ceramics by ball milling foaming-freeze drying process. Ceram Int 2020, 46:9834-9838