[1] Hyett A J,Moosavi M,Bawden W F. Load distribution along fully grouted bolts with emphasis on cable bolt reinforcement[J]. International Journal for Numerical and Analytical Methods in Geomechanics, 2015, 20(7): 517-544.
[2] He M C, Xie H P, Peng S P, et al.Study on rock mechanics in deep mining engineering[J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(16): 2803-2813.
[3] Kim Y, Hossain M S, Lee J. Dynamic Installation of a Torpedo Anchor in Two-layered Clays[J]. Canadian Geotechnical Journal, 2017(2): 446-454.
[4] Vandermaat D, Saydam S, Hagan P C, et al. Examination of rockbolt stress corrosion cracking utilising full size rockbolts in a controlled mine environment[J]. International Journal of Rock Mechanics and Mining Sciences, 2016, 81: 86-95.
[5] Kang H, Wu Y, Gao F, et al. Fracture characteristics in rock bolts in underground coal mine roadways[J]. International Journal of Rock Mechanics and Mining Sciences, 2013, 62(5): 105-112.
[6] Jalalifar H. A new approach in determining the load transfer mechanism in fully grouted bolts[D]. Australia: University of Wollongong, 2006.
[7] He M C, Gong W L, Wang J, et al. Development of a novel energy-absorbing bolt with extraordinarily large elongation and constant resistance[J]. International Journal of Rock Mechanics and Mining Sciences, 2014, 67 (1): 29-42.
[8] Alderson A, Alderson K L. Proceedings of the Institution of Mechanical Engineers G Journal of Aerospace Engineering[J]. Auxetic materials, 2007, 221: 565-575.
[9] Yu C, Ji S, Li Q. Effects of porosity on seismic velocities, elastic moduli and Poisson’s ratios of solid materials and rocks[J]. Journal of Rock Mechanics and Geotechnical Engineering, 2016, 8(1): 35–49.
[10] Wan H, Ohtaki H, Kotosaka S, et al. A study of negative Poisson’s ratios in auxetic honeycombs based on a large deflection model[J].European Journal of Mechanics: A /Solids, 2004, 23(1): 95-106.
[11] Horrigan E J, Smith C W, Scarpa F L, et al. Simulated optimization of disordered structures with negative Poisson’s ratios[J]. Mechanics of Materials, 2009, 41(8): 919-927.
[12] Gaspar N. A granular material with a negative Poisson’s ratio[J]. Mechanics of Materials, 2010, 42: 673-677.
[13] Shi Z C, Fan R H, Zhang Z D, et al. Random composites of nickel networks supported by porous alumina toward double negative materials[J]. Advanced Materials. 2012, 24(17): 2349-2352.
[14] Liu Y P, Hu H. A review on auxetic structures and polymeric materials[J]. Scientific Research and Essays. 2010, 5(10): 1052-1063.
[15] Saxena K K, Das R, Calius E P. Three decades of auxetics research materials with negative Poisson's ratio: A Review[J]. Advanced Engineering Materials, 2016, 18:1847-1870.
[16] Evans K E. Auxetic Materials: Functional Materials and Structures from Lateral Thinking! [J]. Advanced Materials, 2010, 12(9): 617-628.
[17] Critchley R, Corni I, Wharton J A, et al. A review of the manufacture, mechanical properties and potential applications of auxetic foams[J]. Physica Status Solidi, 2013, 250(10): 1963-1982.
[18] Li J W, Qiao J G, Fu X, et al. Research Progress on Material/Structure and Mechanical Properties of Energy-absorbing Bolt Used in Ground Anchorage[J]. Materials reports, 2019, 33(5): 1567-1574.
[19] Lakes R. Foam structures with a negative Poisson's ratio[J]. Science, 1987, 235(4792): 1038-1040.
[20] Martz E O, Lee T, Lakes R, et al. Re-entrant transformation methods in closed cell foams [J]. Cellular polymers.1996, 15(4): 229-249.
[21] Chen F, Tang C A, Sun X M, et al. Supporting characteristics analysis of constant resistance bolts under coupled static-dynamic loading[J]. Journal of Mountain Science, 2019, 16(05): 217-226.
[22] Tang C A, Chen Feng, Sun X M, et al. Numerical analysis for support mechanism of constant-resistance bolts[J]. Chinese Journal of Geotechnical Engineering, 2018, 40(12): 2281-2288.
[23] Grima J N, Gatt R, Alderson A, et al. On the potential of connected stars as auxetic systems[J]. Molecular Simulation, 2005, 31(13): 925-935.
[24] Alderson K L, Alderson A, Webber R S, et al. Evidence for uniaxial drawing in the fibrillated microstructure of auxetic microporous polymers[J]. Journal of materials science. 1998, 17(16): 1415-1419.
[25] Ravirala N, Alderson K L, Davies P J, et al. Negative Poisson’s ratio polyester fibers[J]. Textile research journal, 2006, 76(7): 540-546.
[26] Alderson K L, Andrew A, Smart G, et al. Auxetic polypropylene fibres: Part I -Manufacture and characterisation[J]. Plastics, rubber and composites. 2002, 31(8): 344-349.
[27] Lakes R. Materials with structural hierarchy[J]. Nature, 1993, 361(6412): 511-515.
[28] Miller W, Hook P B, Smith C W, et al. The manufacture and characterisation of a novel, low modulus, negative Poisson’s ratio composite[J]. Composites Science and Technology, 2009, 69 (5): 651-655.
[29] Wojciechowski K W. Two-dimensional isotropic system with a negative Poisson’s ratio[J]. Physics Letters A, 1989, 137(1): 60-64.
[30] Grima J N, Gatt R, Alderson A, et al. An alternative explanation for the negative Poisson’s ratios in α-cristobalite[J]. Materials Science and Engineering, 2006, 423: 219-224.
[31] Gercek H. Poisson’s ratio values for rocks. International Journal of Rock Mechanics and Mining Sciences, 2007, 44: 1-13.
[32] Tang C A, Yang W T, Fu Y F, et al. A new approach to numerical method of modelling geological processes and rock engineering problems-continuum to discontinuum and linearity to nonlinearity[J]. Engineering Geology, 1998, 49 (3-4): 207-214.
[33] Tang CA. Numerical simulation of progressive rock failure and associated seismicity[J]. International Journal of Rock Mechanics and Mining Sciences, 1997, 34 (2): 249-261.
[34] Tang C A, Kaiser P K. Numerical simulation of cumulative damage and seismic energy release in unstable failure of brittle Rock-part I. Fundamentals[J]. International Journal of Rock Mechanics and Mining Sciences, 1998, 35 (2): 113-121.
[35] Tang C A. Numerical experiments of rock failure process[M]. Beijing: Science Press, 2003. (in Chinese)
[36] Zhang J X, Tang C A, Liang Z Z, et al. Numerical simulation of failure process of reinforced concrete specimen under uniaxial tension[J]. Chinese Journal of Computational Mechanics, 2007, 24(4): 454-458. (in Chinese)
[37] Mogi K. Earthquake prediction[M]. Tokyo: Academic Press, 1985: 20-123.