1. Ashour T, Wieland H, Georg H, Bockisch FJ, Wu W. The influence of natural reinforcement fibres on insulation values of earth plaster for straw bale buildings. Materials Design. 2010;31(10):4676–85.
2. Bohler J. Simple and inexpensive reinforcement of plaster casts. Der Chirurg; Zeitschrift fur alle Gebiete der operativen Medizen 1955,26 (3), 144.
3. Khenfer MM, Morlier PP. Cellulose fibres reinforced plaster. Mater Struct. 1999;32(215):52–8.
4. Altin S, Anil O, Kopraman Y, Belgin C. Strengthening masonry infill walls with reinforced plaster. Proceedings of the Institution of Civil Engineers-Structures and Buildings 2010,163 (5), 331–342.
5. Quagliarini E, D'Orazio M. Light Vaults With Frescoes or Stuccoes Strengthened by Glass Fiber-Reinforced Polymer (GFRP) the Role of the Reinforcement on Intrados Strains: First Experimental Data. International Journal of Architectural Heritage 2010,4 (4), 320–336.
6. Li N, Zhao Q, Zhang J, Fu Y, Liu M. A new type of polyurethane polyurea reinforcement material for coal mine. Modern Chemical Industry 2016,36 (10), 126–128.
7. Feng Z. Application of Polyurethane Grouting Material Modified by Silicate to the Reinforcement of Coal Mines Roadway. Journal of Yangtze River Scientific Research Institute 2013,30 (10), 99–103.
8. Linghua TAN, Zhangzhong W, Yuming DAI, Zhixin BA. Progress in Study on the Reinforced Rigid Polyurethane Foams. Materials Review 2006,20 (9), 21–25.
9. Shao-bin Y, Yang Z, Fang-fang C. Development of research on polyurethane grouting materials in mining engineering. Applied Chemical Industry. 2010;39(1):111–5.
10. Su BM, Zhang HB, Zhang BJ, Jiang DQ, Zhang R, Tan X. A scientific investigation of five polymeric materials used in the conservation of murals in Dunhuang Mogao Grottoes. Journal of Cultural Heritage. 2018;31:105–11.
11. Cocca M, D'Arienzo L, D'Orazio L, Gentile G, Mancarella C, Martuscelli E, Polcaro C. Water dispersed polymers for textile conservation: a molecular, thermal, structural, mechanical and optical characterisation. Journal of Cultural Heritage 2006,7 (4), 236–243.
12. Briffa SM, Vella DA, The behaviour of as-applied and artificially weathered silica-epoxy consolidants on a typical Mediterranean porous limestone: a comparison with TEOS. Herit. Sci. 2019,7, 13. Formia, A.; Tulliani, J. M.; Antonaci, P.; Sangermano, M., Epoxy monomers consolidant for lime plaster cured via a redox activated cationic polymerization. Journal of Cultural Heritage 2014,15 (6), 595–601.
14. Brown M, Davidson A. The Use of Cyclododecane to Protect Delicate Fossils during Transportation. Journal of Vertebrate Paleontology 2010,30 (1), 300–303.
15. Papini G, Borgioli L, De Luca D, Gui MO, Modugno F. Evaluation of the Effects of Cyclododecane on Oil Paintings. International Journal of Conservation Science 2018,9 (1), 105–116.
16. Stein R, Kimmel J, Marincola M, Klemm F. Observations on cyclododecane as a temporary consolidant for stone. Journal of the American Institute for Conservation 2000,39 (3), 355–369.
17. Bruckle I, Thornton J, Nichols K, Strickler G. Cyclododecane: Technical note on some uses in paper and objects conservation. Journal of the American Institute for Conservation 1999,38 (2), 162–175.
18. Munoz-Vinas S, Vivancos-Ramon V, Ruiz-Segura P. The Influence of Temperature on the Application of Cyclododecane in Paper Conservation. Restaurator-International Journal for the Preservation of Library and Archival Material 2016,37 (1), 29–48.
19. Diaz-Marin C, Aura-Castro E, Sanchez-Belenguer C, Vendrell-Vidal E. Cyclododecane as opacifier for digitalization of archaeological glass. Journal of Cultural Heritage 2016,17, 131–140.
20. Maish JP, Risser E. A case study in the sue of cyclododecane and latex rubber in the molding of marble. Journal of the American Institute for Conservation 2002,41 (2), 127–137.
21. Vernez D, Wognin B, Tomicic C, Plateel G, Charriere N, Bruhin S. Cyclododecane exposure in the field of conservation and restoration of art objects. International Archives of Occupational and Environmental Health 2011,84 (4), 371–374.
22. Yu Y, Zhang W, Han X, Huang X, Zhao J, Ren Q, Luo H. Menthol-based eutectic mixtures: Novel potential temporary consolidants for archaeological excavation applications. Journal of Cultural Heritage 2019,39, 103–109.
23. Han X, Rong B, Huang X, Zhou T, Luo H, Wang C. The Use of Menthol as Temporary Consolidant in the Excavation of Qin Shihuang's Terracotta Army. Archaeometry 2014,56 (6), 1041–1053.
24. Han X, Huang X, Zhang BJ. Laboratory Research into the Use of Menthol as a Temporary Consolidant for Conservation on Archaeological Excavations. Archaeometry 2018,60 (6), 1334–1345.
25. Sadek H, Berrie BH, Weiss RG. Sublimable layers for protection of painted pottery during desalination. A comparative study. Journal of the American Institute for Conservation 2018,57 (4), 189–202.
26. Yrjö H, Roos. Melting and Crystallization of Sugars in High-Solids Systems. J Agric Food Chem. 2013;61:3167–78.
27. Berto F, Lazzarin P. Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches. Mater Sci Eng R-Rep. 2014;75:1–48.
28. Abadias G, Chason E, Keckes J, Sebastiani M, Thompson GB, Barthel E, Doll GL, Murray CE, Stoessel CH, Martinu L. Stress in thin films and coatings: Current status, challenges, and prospects. J Vac Sci Technol A. 2018;36:020801.
29. van Leeuwen M, Kamminga J-D, Mittemeijer EJ. Diffraction stress analysis of thin films: Modeling and experimental evaluation of elastic constants and grain interaction. J Appl Phys. 1999;86:1904–14.
30. Holden TM, Root JH, Holt RA, Hayashi M. Neutron-diffraction measurements of stress. Physica B. 1995;214(213):793–6.
31. Bemporada E, Brisottob M, Deperob LE, Gelfib M, Korsunskyc AM, Luntc AJG, Sebastiania M. A critical comparison between XRD and FIB residual stress measurement techniques in thin films. Thin Solid Films. 2014;572:224–31.
32. Grabner L. Spectroscopic technique for the measurement of residual stress in sintered Al2O3. J Appl Phys. 1978;49:580–3.
33. Parnas L, Bilir ÖG, Tezcan E. Strain gage methods for measurements of opening mode stress intensity factor. Eng Fract Mech. 1996;55(3):485–92.
34. Zike S, Mikkelsen LP. Correction of Gauge Factor for Strain Gauges Used in Polymer Composite Testing. Experimental Mechanics 2013,54 (3), 393–403.
35. Poornachandra Pandit AV, Venkataramana K, Parthiban P. Experimental investigation on corroded reinforced concrete beam in coastal environment using strain gauges, International Journal of Engineering and Innovative Technology 2013,3 (5), 416–422.
36. Freddi A, Olmi G, Cristofolini L. Introduction to the Application of Strain Gages. In: Experimental Stress Analysis for Materials and Structures. Springer Series in Solid and Structural Mechanics, 2015, vol 4. Springer, Cham.
37. Liu GZ, Liu H, Wei AQ, Xiao JL, Wang P, Li SZ. A new device for stress monitoring in continuously welded rails using bi-directional strain method. Journal of Modern Transportation 2018,26 (3), 179–188.
38. Hu XY, Wang BW, Ji H. A Wireless Sensor Network-Based Structural Health Monitoring System for Highway Bridges. Computer-Aided Civil and Infrastructure Engineering 2013,28 (3), 193–209.
39. Tegtmeier FL. Strain gauge based microsensor for stress analysis in building structures. Measurement 2008,41 (10), 1144–1151.
40. Teomete E, Kocyigit OI. Tensile strain sensitivity of steel fiber reinforced cement matrix composites tested by split tensile test. Construction and Building Materials 2013,47, 962–968.
41. Gomes PTV, Maia NS, Mansur TR, Palma ES. Temperature effect on strain measurement by using weldable electrical resistance strain gages. Journal of Testing and Evaluation 2003,31 (5), 363–369.
42. Afonin GV, Mitrofanov YP, Kobelev NP, Pinto MWD, Wilde G, Khonik VA. Relationship between the enthalpies of structural relaxation, crystallization and melting in metallic glass-forming systems. Scr Mater. 2019;166:6–9.