[1] Kirkhorn L, Frogner K, Andersson M, Ståhl JE. Improved Tribotesting for Sheet Metal Forming. Procedia CIRP 2012;3:507–12. https://doi.org/https://doi.org/10.1016/j.procir.2012.07.087.
[2] Padmanabhan R, Oliveira MC, Alves JL, Menezes LF. Influence of process parameters on the deep drawing of stainless steel. Finite Elem Anal Des 2007;43:1062–7. https://doi.org/https://doi.org/10.1016/j.finel.2007.06.011.
[3] Karupannasamy DK. Friction modeling on multiple scales for Deep drawing processes. University of Twente, Enschede, The Netherlands, 2013.
[4] Trzepiecinski T, Lemu HG. Recent Developments and Trends in the Friction Testing for Conventional Sheet Metal Forming and Incremental Sheet Forming. Met 2020;10. https://doi.org/10.3390/met10010047.
[5] Hol J, Cid Alfaro M V, de Rooij MB, Meinders T. Advanced friction modeling for sheet metal forming. Wear 2012;286–287:66–78. https://doi.org/https://doi.org/10.1016/j.wear.2011.04.004.
[6] Wang W, Zhao Y, Wang Z, Hua M, Wei X. A study on variable friction model in sheet metal forming with advanced high strength steels. Tribol Int 2016;93:17–28. https://doi.org/https://doi.org/10.1016/j.triboint.2015.09.011.
[7] Bay N, Azushima A, Groche P, Ishibashi I, Merklein M, Morishita M, et al. Environmentally benign tribo-systems for metal forming. CIRP Ann 2010;59:760–80. https://doi.org/https://doi.org/10.1016/j.cirp.2010.05.007.
[8] Shafiee Sabet A, Domitner J, Öksüz KI, Hodžić E, Torres H, Rodríguez Ripoll M, et al. Tribological investigations on aluminum alloys at different contact conditions for simulation of deep drawing processes. J Manuf Process 2021;68:546–57. https://doi.org/10.1016/j.jmapro.2021.05.050.
[9] Dattatraya Bachchhav B, S. Lathkar G, Bagchi H. Tribology of drawing lubricants for low carbon steel. Ind Lubr Tribol 2014;66:640–4. https://doi.org/10.1108/ILT-10-2012-0105.
[10] ter Haar R. Friction in sheet metal forming, the influence of (local) contact conditions and deformation. University of Twente, Enschede, The Netherlands, 1996.
[11] Singh C, Agnihotri G. Study of Deep Drawing Process Parameters: A Review. Int. J. Sci. Res. Publ., 2015, p. Vol. 5-2.
[12] Wilson WRD, Hsu T-C, Huang X-B. A Realistic Friction Model for Computer Simulation of Sheet Metal Forming Processes. J Eng Ind 1995;117:202–9. https://doi.org/10.1115/1.2803295.
[13] Evin E, Daneshjo N, Mareš A, Tomáš M, Petrovčiková K. Experimental Assessment of Friction Coefficient in Deep Drawing and Its Verification by Numerical Simulation. Appl Sci 2021;11. https://doi.org/10.3390/app11062756.
[14] Kott M, Erz C, Heingärtner J, Groche P. Controllability of Temperature Induced Friction Effects during Deep Drawing of Car Body Parts with High Drawing Depths in Series Production. Procedia Manuf 2020;47:553–60. https://doi.org/https://doi.org/10.1016/j.promfg.2020.04.166.
[15] Tigrinho LM V., dos Santos RA, Chemin Filho RA, Marcondes PVP. Experimental investigation on the influence of the lubricant type in the punch stretching of extra deep-drawing steel. J Brazilian Soc Mech Sci Eng 2008;30:290–4. https://doi.org/https://doi.org/10.1590/S1678-58782008000400004.
[16] Le HR, Sutcliffe MPF. Measurements of friction in strip drawing under thin film lubrication. Tribol Int 2002;35:123–8. https://doi.org/https://doi.org/10.1016/S0301-679X(01)00104-9.
[17] Kim YS, Jain MK, Metzger DR. Determination of pressure-dependent friction coefficient from draw-bend test and its application to cup drawing. Int J Mach Tools Manuf 2012;56:69–78. https://doi.org/https://doi.org/10.1016/j.ijmachtools.2011.12.011.
[18] Kim H, Sung JH, Sivakumar R, Altan T. Evaluation of stamping lubricants using the deep drawing test. Int J Mach Tools Manuf 2007;47:2120–32. https://doi.org/https://doi.org/10.1016/j.ijmachtools.2007.04.014.
[19] Trzepieciński T, Fejkiel R. On the influence of deformation of deep drawing quality steel sheet on surface topography and friction. Tribol Int 2017;115:78–88. https://doi.org/https://doi.org/10.1016/j.triboint.2017.05.007.
[20] Wu Y, Recklin V, Groche P. Strain Induced Surface Change in Sheet Metal Forming: Numerical Prediction, Influence on Friction and Tool Wear. J Manuf Mater Process 2021;5. https://doi.org/10.3390/jmmp5020029.
[21] Azushima A, Sakuramoto M. Effects of Plastic Strain on Surface Roughness and Coefficient of Friction in Tension-Bending Test. CIRP Ann 2006;55:303–6. https://doi.org/10.1016/S0007-8506(07)60422-3.
[22] Trzepiecinski T. A Study of the Coefficient of Friction in Steel Sheets Forming. Met 2019;9. https://doi.org/10.3390/met9090988.
[23] Masters IG, Williams DK, Roy R. Friction behaviour in strip draw test of pre-stretched high strength automotive aluminium alloys. Int J Mach Tools Manuf 2013;73:17–24. https://doi.org/https://doi.org/10.1016/j.ijmachtools.2013.05.002.
[24] Bay N, Olsson DD, Andreasen JL. Lubricant test methods for sheet metal forming. Tribol Int 2008;41:844–53. https://doi.org/10.1016/J.TRIBOINT.2007.11.017.
[25] Bellemare S, Dao M, Suresh S. The frictional sliding response of elasto-plastic materials in contact with a conical indenter. Int J Solids Struct 2007;44:1970–89. https://doi.org/10.1016/J.IJSOLSTR.2006.08.008.
[26] Bellemare SC, Dao M, Suresh S. Effects of mechanical properties and surface friction on elasto-plastic sliding contact. Mech Mater 2008;40:206–19. https://doi.org/10.1016/J.MECHMAT.2007.07.006.
[27] Mendas M, Ben Tkaya M, Benayoun S, Zahouani H, Kapsa P. Experimental and Numerical Analysis of the Scratch Behaviour of Steels: Description of the Effect of Work Hardening. Int J Eng Appl (IREA); Vol 5, No 4 2017.
[28] Shugurov A, Panin A, Dmitriev A, Nikonov A. The effect of crystallographic grain orientation of polycrystalline Ti on ploughing under scratch testing. Wear 2018;408–409:214–21. https://doi.org/10.1016/J.WEAR.2018.05.013.
[29] Peng LF, Mao MY, Fu MW, Lai XM. Effect of grain size on the adhesive and ploughing friction behaviours of polycrystalline metals in forming process. Int J Mech Sci 2016;117:197–209. https://doi.org/10.1016/J.IJMECSCI.2016.08.022.
[30] Jain M, Lloyd DJ, Macewen SR. Hardening laws, surface roughness and biaxial tensile limit strains of sheet aluminium alloys. Int J Mech Sci 1996;38:219–32. https://doi.org/10.1016/0020-7403(95)00038-Y.
[31] Bowden FP, Tabor D. The Friction and Lubrication of Solids. New York Oxford Univ Press 1950:337.
[32] Exol-lubricants Company. Website of Exol-lubricants Company 2022. https://www.exol-lubricants.com/products/327/trojan-460-g006/ (accessed April 30, 2022).