Ashok, B., A. K. Jeevanantham, K. Prabhu, Pratik M. Shirude, Datta D. Shinde, Nikhil S. Nadgauda, and C. Karthick. "Multi-Objective Optimization on Vibration and Noise Characteristics of Light Duty Biofuel Powered Engine at Idling Condition Using Response Surface Methodology." Journal of Energy Resources Technology 143, no. 4 (2020).
Barabas, I., Todoruţ, A. and Băldean, D., 2010. Performance and emission characteristics of an CI engine fueled with diesel–biodiesel–bioethanol blends. Fuel, 89(12), pp.3827-3832.
Bhowmik, Subrata, Rajsekhar Panua, Durbadal Debroy, and Abhishek Paul. "Artificial neural network prediction of diesel engine performance and emission fueled with diesel–kerosene–ethanol blends: a fuzzy-based optimization." Journal of Energy Resources Technology 139, no. 4 (2017).
Bhowmik, Subrata, Rajsekhar Panua, Subrata Kumar Ghosh, Durbadal Debroy, and Abhishek Paul. "A comparative study of Artificial Intelligence based models to predict performance and emission characteristics of a single cylinder Diesel engine fueled with Diesosenol." Journal of Thermal Science and Engineering Applications 10, no. 4 (2018).
Charoensaeng, A., Khaodhiar, S., Sabatini, D.A. and Arpornpong, N., 2018. Exhaust emissions of a diesel engine using ethanol-in-palm oil/diesel microemulsion-based biofuels. Environmental Engineering Research, 23(3), pp.242-249.
Chen, A.F., Adzmi, M.A., Adam, A., Othman, M.F., Kamaruzzaman, M.K. and Mrwan, A.G., 2018. Combustion characteristics, engine performances and emissions of a diesel engine using nanoparticle-diesel fuel blends with aluminium oxide, carbon nanotubes and silicon oxide. Energy Conversion and Management, 171, pp.461-477.
Chockalingam, S.R., Kumar, M. and Pauldoss, P., 2017. Effective application of ethanol in diesel engines. International Journal of Green Energy, 14(12), pp.1027-1033.
Datta, A. and Mandal, B.K., 2014. Use of Jatropha biodiesel as a future sustainable fuel. Energy Technology & Policy, 1(1), pp.8-14.
De Luca, L.T., Galfetti, L., Severini, F., Meda, L., Marra, G., Vorozhtsov, A.B., Sedoi, V.S. and Babuk, V.A., 2005. Burning of nano-aluminized composite rocket propellants. Combustion, Explosion and Shock Waves, 41(6), pp.680-692.
Dogan, B., Cakmak, A., Yesilyurt, M.K. and Erol, D., 2020. Investigation on 1-heptanol as an oxygenated additive with diesel fuel for compression-ignition engine applications: An approach in terms of energy, exergy, exergoeconomic, enviroeconomic, and sustainability analyses. Fuel, 275, p.117973.
El-Seesy, A.I., Attia, A.M. and El-Batsh, H.M., 2018. The effect of Aluminum oxide nanoparticles addition with Jojoba methyl ester-diesel fuel blend on a diesel engine performance, combustion and emission characteristics. Fuel, 224, pp.147-166.
Fang, Q., Fang, J., Zhuang, J. and Huang, Z., 2013. Effects of ethanol–diesel–biodiesel blends on combustion and emissions in premixed low temperature combustion. Applied Thermal Engineering, 54(2), pp.541-548.
Ghadikolaei, M.A., Yung, K.F., Cheung, C.S. and Lau, P.C., 2019. Chemical properties and composition of PM emitted from a diesel engine fueled with ternary fuel (diesel-biodiesel-ethanol) in blended and fumigation modes. Fuel, 251, pp.368-382.
Hosseini, S.H., Taghizadeh-Alisaraei, A., Ghobadian, B. and Abbaszadeh-Mayvan, A., 2017. Effect of added alumina as nano-catalyst to diesel-biodiesel blends on performance and emission characteristics of CI engine. Energy, 124, pp.543-552.
Hulwan, D.B. and Joshi, S.V., 2011. Performance, emission and combustion characteristic of a multicylinder DI diesel engine running on diesel–ethanol–biodiesel blends of high ethanol content. Applied Energy, 88(12), pp.5042-5055.
Kao, M.J., Ting, C.C., Lin, B.F. and Tsung, T.T., 2008. Aqueous aluminum nanofluid combustion in diesel fuel. Journal of testing and evaluation, 36(2), pp.186-190.
Kapoor, Mayank, Narendra Kumar, Ajay Singh Verma, Gaurav Gautam, and Aditya Kumar Padap. "Performance and Emission Analysis of Compression Ignition Engine with Neem Methyl Ester Mixed with Cerium Oxide (CeO2) Nanoparticles." Journal of Energy Resources Technology 142, no. 8 (2020).
Kumar Sharma, Pushpendra, Dilip Sharma, Shyam Lal Soni, and Amit Jhalani. "Characterization of the nonroad modified diesel engine using a novel entropy-VIKOR approach: experimental investigation and numerical simulation." Journal of Energy Resources Technology 141, no. 8 (2019).
Li, X., Xu, Z., Guan, C. and Huang, Z., 2014. Particle size distributions and OC, EC emissions from a diesel engine with the application of in-cylinder emission control strategies. Fuel, 121, pp.20-26.
Lin, J., Gaustad, G. and Trabold, T.A., 2013. Profit and policy implications of producing biodiesel–ethanol–diesel fuel blends to specification. Applied energy, 104, pp.936-944.
Marri, Vinod Babu, K. Madhu Murthy, and G. Amba Prasad Rao. "Optimization of operating parameters of an off-road automotive diesel engine running at highway drive conditions using Response Surface Methodology." Journal of Energy Resources Technology (2020): 1-48.
Nour, M., El-Seesy, A.I., Abdel-Rahman, A.K. and Bady, M., 2018. Influence of adding aluminum oxide nanoparticles to diesterol blends on the combustion and exhaust emission characteristics of a diesel engine. Experimental Thermal and Fluid Science, 98, pp.634-644.
Prabu, A. and Anand, R.B., 2016. Emission control strategy by adding alumina and cerium oxide nano particle in biodiesel. Journal of the Energy Institute, 89(3), pp.366-372.
Qi, D.H., Chen, H., Geng, L.M. and Bian, Y.Z., 2011. Effect of diethyl ether and ethanol additives on the combustion and emission characteristics of biodiesel-diesel blended fuel engine. Renewable energy, 36(4), pp.1252-1258.
Raju, V.D., Kishore, P.S., Nanthagopal, K. and Ashok, B., 2018. An experimental study on the effect of nanoparticles with novel tamarind seed methyl ester for diesel engine applications. Energy conversion and management, 164, pp.655-666.
Rakopoulos, D.C., Rakopoulos, C.D., Kakaras, E.C. and Giakoumis, E.G., 2008. Effects of ethanol–diesel fuel blends on the performance and exhaust emissions of heavy duty DI diesel engine. Energy conversion and management, 49(11), pp.3155-3162.
Sandalcı, T., Karagöz, Y., Orak, E. and Yüksek, L., 2014. An experimental investigation of ethanol-diesel blends on performance and exhaust emissions of diesel engines. Advances in Mechanical Engineering, 6, p.409739.
Selvan, V.A.M., Anand, R.B. and Udayakumar, M., 2009. Effects of cerium oxide nanoparticle addition in diesel and diesel-biodiesel-ethanol blends on the performance and emission characteristics of a CI engine. J Eng Appl Sci, 4(7), pp.1819-6608.
Shaafi, T. and Velraj, R., 2015. Influence of alumina nanoparticles, ethanol and isopropanol blend as additive with diesel–soybean biodiesel blend fuel: Combustion, engine performance and emissions. Renewable Energy, 80, pp.655-663.
Sivakumar, M., Sundaram, N.S. and Thasthagir, M.H.S., 2018. Effect of aluminium oxide nanoparticles blended pongamia methyl ester on performance, combustion and emission characteristics of diesel engine. Renewable Energy, 116, pp.518-526.
Soudagar, M.E.M., Nik-Ghazali, N.N., Kalam, M.A., Badruddin, I.A., Banapurmath, N.R. and Akram, N., 2018. The effect of nano-additives in diesel-biodiesel fuel blends: A comprehensive review on stability, engine performance and emission characteristics. Energy Conversion and Management, 178, pp.146-177.
Tyagi, H., Phelan, P.E., Prasher, R., Peck, R., Lee, T., Pacheco, J.R. and Arentzen, P., 2008. Increased hot-plate ignition probability for nanoparticle-laden diesel fuel. Nano letters, 8(5), pp.1410-1416.
Venu, H. and Madhavan, V., 2016. Effect of Al2O3 nanoparticles in biodiesel-diesel-ethanol blends at various injection strategies: Performance, combustion and emission characteristics. Fuel, 186, pp.176-189.
Venu, H. and Madhavan, V., 2017. Effect of diethyl ether and Al 2 O 3 nano additives in diesel-biodiesel-ethanol blends: Performance, combustion and emission characteristics. Journal of Mechanical Science and Technology, 31(1), pp.409-420.
Wu, Q., Xie, X., Wang, Y. and Roskilly, T., 2018. Effect of carbon coated aluminum nanoparticles as additive to biodiesel-diesel blends on performance and emission characteristics of diesel engine. Applied Energy, 221, pp.597-604.
Yesilyurt, M.K. and Arslan, M., 2018. Analysis of the fuel injection pressure effects on energy and exergy efficiencies of a diesel engine operating with biodiesel. Biofuels.
Yesilyurt, M.K. and Aydin, M., 2020. Experimental investigation on the performance, combustion and exhaust emission characteristics of a compression-ignition engine fueled with cottonseed oil biodiesel/diethyl ether/diesel fuel blends. Energy Conversion and Management, 205, p.112355.
Yesilyurt, M.K., 2019. The effects of the fuel injection pressure on the performance and emission characteristics of a diesel engine fuelled with waste cooking oil biodiesel-diesel blends. Renewable energy, 132, pp.649-666.
Yesilyurt, M.K., Aydin, M., Yilbasi, Z. and Arslan, M., 2020. Investigation on the structural effects of the addition of alcohols having various chain lengths into the vegetable oil-biodiesel-diesel fuel blends: An attempt for improving the performance, combustion, and exhaust emission characteristics of a compression ignition engine. Fuel, 269, p.117455.
Yesilyurt, M.K., Yilbasi, Z. and Aydin, M., 2020. The performance, emissions, and combustion characteristics of an unmodified diesel engine running on the ternary blends of pentanol/safflower oil biodiesel/diesel fuel. Journal of Thermal Analysis and Calorimetry, pp.1-40.
Yetter, R.A., Risha, G.A. and Son, S.F., 2009. Metal particle combustion and nanotechnology. Proceedings of the Combustion Institute, 32(2), pp.1819-1838.
Yilmaz, N., Vigil, F.M., Donaldson, A.B. and Darabseh, T., 2014. Investigation of CI engine emissions in biodiesel–ethanol–diesel blends as a function of ethanol concentration. Fuel, 115, pp.790-793.