Culture of Simian virus 40 large T antigen–immortalized human granulosa (SVOG) cells
SVOG cells were used in the present study to evaluate the influences of BTC treatment. First, a hemocytometer was used to count cells, and 0.04% trypan blue was utilized to assess cell viability. Then, the cells were seeded in 6-well plates or dishes and cultured in a humidified atmosphere containing 5% CO2 and 95% air at 37 °C. The cells were cultured in Dulbecco’s modified Eagle's medium/nutrient mixture F-12 Ham (DMEM/F-12; Sigma‒Aldrich Corp., Oakville, ON) supplemented with 10% charcoal/dextran-treated fetal bovine serum (HyClone, Logan, UT), 100 μg/ml streptomycin sulfate (Invitrogen, Life Technologies), 100 U/ml penicillin (Invitrogen, Life Technologies, NY), and GlutaMAX (1X, Invitrogen, Life Technologies). The medium for SVOG cell culture was changed every other day. Subsequently, serum-free DMEM/F-12 was used to starve cells for 12 h before BTC treatment.
Preparation and culture of primary human granulosa-lutein (hGL) cells
Primary hGL cells were obtained with informed patient consent following approval from the University of British Columbia Ethics Board. Two controlled ovarian stimulation protocols for in vitro fertilization patients were utilized: 1) one involved luteal-phase nafarelin acetate (Synarel, Pfizer, Kirkland, Quebec, Canada) and 2) another was based on follicular phase GnRH antagonist (Ganirelix; Merck Canada) down regulation. Gonadotropin stimulation was initiated on menstrual cycle Day 2 by administration of human menopausal gonadotropin (hMG; Menopur, Ferring, Canada) and recombinant FSH (Puregon, Merck, Canada). Based on follicle size, human chorionic gonadotropin was administered 34-36 h before oocyte retrieval. Granulosa cells were purified by density centrifugation of follicular aspirates obtained from women undergoing oocyte retrieval as previously described [49]. Primary hGL cells collected from individual females were cultured separately. Purified hGL cells were seeded in 6-well plates in the same culture environment and culture medium that was used with the SVOG cell line.
Antibodies and reagents
Polyclonal rabbit anti-connexin 43 (#3512) (1:1000) and polyclonal rabbit anti-phospho-connexin 43 (Ser368) (D6W8P) (#52559) antibodies were obtained from Cell Signaling Technology (Beverly, MA). A monoclonal mouse anti-α-tubulin (B-5-1-2) (sc-23948) (1:3000) antibody was obtained from Santa Cruz Biotechnology (Santa Cruz, CA). Horseradish peroxidase-conjugated goat anti-rabbit IgG and goat anti-mouse IgG were obtained from Bio-Rad Laboratories (Hercules, CA). E. coli-derived recombinant human betacellulin (Asp32-Tyr111) was obtained from R&D Systems (Minneapolis, MN). AG 1478 was obtained from Sigma‒Aldrich Corp. U0126 was obtained from Calbiochem. Sotrastaurin (AEB071) and a PKC-theta inhibitor were obtained from Selleckchem.
Reverse transcription and real-time quantitative PCR (RT‒qPCR)
Cells were washed with cold phosphate-buffered saline (PBS), and total RNA was extracted with TRIzol reagent (Invitrogen) according to the manufacturer’s instructions. RNA (2 μg) was reverse-transcribed into first-strand cDNA with random primers and MMLV reverse transcriptase (Promega, Madison, WI). Each 20-μl qPCR consisted of 1X SYBR Green PCR Master Mix (Applied Biosystems, Foster City, CA), 20 ng of cDNA and 250 nM of each primer. The primers used were GJA1 (Cx43), 5'- TAC CAA ACA GCA GCG GAG TT -3' (sense) and 5'- TGG GCA CCA CTC TTT TGC TT -3' (antisense); and glyceraldehyde-3-phosphate dehydrogenase (GAPDH), 5'- ATG GAA ATC CCA TCA CCA TCT T -3' (sense) and 5'- CGC CCC ACT TGA TTT TGG -3' (antisense). qPCR was performed on an Applied Biosystems 7300 Real-Time PCR System equipped with a 96-well optical reaction plate (Applied Biosystems). The specificity of each assay was validated by dissociation curve analysis and agarose gel electrophoresis of the PCR products. Assay performance was validated by evaluating the amplification efficiencies on the basis of the means of calibration curves and by ensuring that the plot of the log input amount vs. ΔCq (also known as ΔCT) had a slope < |0.1|. The PCR parameters were 50 °C for 2 min, 95 °C for 10 min and 40 cycles of 95 °C for 15 sec and 60 °C for 1 min. Three separate experiments were performed with different cultures, and each sample was assayed in triplicate. A mean value was used for the determination of mRNA levels via the comparative Cq (2–ΔΔCq) method with GAPDH used as the reference gene.
Western blot analysis
After treatment, the cells were washed with cold PBS 3 times and lysed in lysis buffer (Cell Signaling) containing a protease inhibitor cocktail (Sigma‒Aldrich). Extracts were centrifuged at 20,000 x g for 10 min at 4 °C to remove cell debris. A DC Protein Assay (Bio-Rad Laboratories) was used to quantify the protein concentrations. Equal amounts of protein were separated by 10% sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS‒PAGE) and transferred from the gels to polyvinylidene fluoride membranes. The membranes were blocked with 5% nonfat dried milk in Tris-buffered solution containing 0.05% Tween 20 at room temperature for 1 h and incubated with the relevant primary antibodies at 4 °C overnight. After washing with TBS, the membranes were incubated with a peroxidase conjugated secondary antibody (Bio-Rad) at room temperature for 1 h. An enhanced chemiluminescence substrate or a SuperSignal West Femto Chemiluminescence Substrate (Pierce, Rockford, IL) was utilized as needed. The membranes were exposed to CL-XPosure film (Thermo Fisher, Waltham, MA) for detection of the immunoreactive bands. Stripping buffer (50 mM Tris-HCl, pH 7.6; 10 mmol/l β-mercaptoethanol; and 1% SDS) was used to strip membranes at 50 °C for 30 min, and the membranes were reprobed with a rabbit anti-Cx43 antibody as the loading control. In protein electrophoresis, the typical pattern of Cx43 (GJA1) are the two bands detectable in Western blot analysis, which are referred to as upper band and lower band [50]. The upper band resembles the non-phosphorylated more immature Cx43 (GJA1), while the lower band represents the phosphorylated Cx43 (GJA1), which is present in functional gap junction plaques [51]. Band intensities of western blot staining were measured and quantitatively analyzed using ImageJ 1.42 (NIH, U.S.A.). The experiments were performed in triplicate. Quantification graphs reflect Integrated Density Values of the treatment group divided by the Integrated Density Values of control group.
Small interfering RNA (siRNA) transfection
Cells were precultured to 50% confluence in antibiotic-free DMEM/F12 with 10% charcoal/dextran-treated fetal bovine serum and then transfected with 25 nM EGFR-targeting siRNA (ON-TARGETplus SMARTpool), 25 nM ErbB4-targeting siRNA (ON TARGETplus SMARTpool), or 25 nM control siRNA (ON-TARGETplus Nontargeting Pool) (Dharmacon) for 48 h using Lipofectamine RNAiMAX (Invitrogen). The efficiency of target gene was confirmed by Western blotting.
Immunofluorescence staining
Cells were plated on glass cover slips, grown to 80% confluence, and fixed with methanol at -20 °C for 30 min. After they were washed with cold PBS three times, the cover slips were blocked with Protein Block Serum-free Buffer (Dako, Mississauga, Ontario, Canada) for 1 h and then incubated with a rabbit anti-phospho-Cx43 antibody (1:100 diluted in Protein Block Serum-free Buffer) at 4 °C overnight. After the cover slips were washed with cold PBS three times, they were incubated with a secondary antibody (Alexa Fluor 555 donkey anti-rabbit IgG, Life Technologies) at room temperature for 1 h. After the cover slips were washed with cold PBS three times, they were counterstained with Prolong™ Gold anti-fading reagent containing DAPI (Thermo) and imaged with a Zeiss Axiophot fluorescence microscope equipped with a digital camera (Q Imaging, Burnaby, BC, Canada). Quantification of the fluorescence intensities were quantified using ImageJ 1.42 (NIH, U.S.A.). The experiments were performed in triplicate. Fluorescence intensity was calculated as fluorescence intensity of the treatment group divided by the fluorescence intensity of control group. The image background was subtracted by ImageJ software.
Protein kinase C (PKC) activity measurement
After treatment, the cells were washed with cold PBS 3 times and lysed in lysis buffer (Cell Signaling) containing a protease inhibitor cocktail (Sigma‒Aldrich). Extracts were centrifuged at 20,000 x g for 10 min at 4 °C to remove cell debris. A DC Protein Assay (Bio-Rad Laboratories) was used to quantify protein concentrations. A total of 0.125 μg of each extract was used for the PKC kinase assay, which was performed with a PKC Kinase Activity Assay Kit (Abcam) according to the manufacturer’s protocol. The kit is based on an ELISA (enzyme-linked immune-absorbent assay), in which a specific peptide is a substrate for PKC and a polyclonal antibody recognizes the phosphorylated form of the substate. The absorbance was measured at 450 nm with a microplate reader to determine PKC activity.
Scrape-loading and dye transfer assay
To date, the scrape-loading and dye transfer assay is the most sensitive assay to evaluate intercellular communication [52]. This technique has been widely used to elucidate the qualitative and quantitative presence or absence of GJIC. Lucifer yellow (MW 457.2) is the most popular used dye with a high fluorescence efficiency. After introduction of Lucifer yellow into living cells, it cannot diffuse through intact cell membranes; however, because of its low molecular weight, it can be transferred to adjacent cells via intact gap junctions. To determine the regulatory effect of BTC on human granulosa cell GJIC activity, we performed scrape-loading and dye transfer assays. After the cells were cultured to 90% confluence, they were pretreated with inhibitors or DMSO and then treated with 50 ng/ml BTC for an additional 15 min. The cells were then washed with PBS and scraped with a surgical blade prior to the addition of fluorescent dye (0.5% Lucifer yellow CH, a potassium salt, Life Technology). Next, the cells were incubated for 5 min and washed with PBS three times to completely remove background fluorescence. Then, the cells were fixed with 4% paraformaldehyde and imaged with a Zeiss Axiophot fluorescence microscope equipped with a digital camera. The amount of dye transferred from one cell to its connected neighbor is dependent on the number of gap junctions that are coupled. The GJIC was estimated as an area that the Lucifer yellow diffuses during a certain period away from the scrape line to the furthest extent of the dye-coupled cells. The expression or fluorescence intensities were quantified using ImageJ 1.42 software (NIH, U.S.A.). The experiments were performed in triplicate. Fluorescence intensity was calculated as fluorescence intensity of the treatment group divided by the fluorescence intensity of control group. The image background was subtracted by ImageJ software.
Statistical analysis
The results were analyzed by one-way ANOVA followed by Tukey’s multiple comparison test in PRISM software (GraphPad Software, Inc., San Diego, CA). The results are presented as the mean ± SEM of at least three independent experiments. The data were considered significantly different when P < 0.05.