[1] Niu X, Guo S, Gao L, et al. The mercury release during thermal treatment of two coal gangues and two coal slimes under N2 and air. Energ Fuel 2017,8648–8654.
[2] Li M, Zhang J, Huang Y, et al. Effects of particle size of crushed gangue backfill materials on surface subsidence and its application under buildings. Environ Earth Sci 2017,76:603–614.
[3] Jelínek P, Marschalko M, Lamich D, et al. Monitoring and analysis of burning in coal tailing dumps: a case study from the Czech Republic. Environ Earth Sci 2015,73:6601–6612.
[4] Liu H,Liu Z. Recycling utilization patterns of coal mining waste in China. Resour Conserv Recy 2010,54:1331–1340.
[5] Chao X U,Kang X. Harm and Comprehensive Utilization of Coal Gangue. Environ Sci Techno 2010,102–104.
[6] Qing Z,Guoqiang Z. Treatment of Wastewater Containing Ni(II)by Pyrites in Coal Gangue. Environ Sci Techno 2008,31:104–105.
[7] Li Y, Yao Y, Liu X, et al. Improvement on pozzolanic reactivity of coal gangue by integrated thermal and chemical activation. Fuel 2013,109:527–533.
[8] Song Z, Jing C, Yao L, et al. Microwave drying performance of single-particle coal slime and energy consumption analyses. Fuel Process Technol 2016,143:69–78.
[9] Zhou K, Lin Q, Hu H, et al. The ignition characteristics and combustion processes of the single coal slime particle under different hot-coflow conditions in N2/O2 atmosphere. Energy 2016,136:173–184.
[10] Wang H, Liu S, Wang X, et al. Ignition and Combustion Behavior of Coal Slime in Air. Energ Fuel 2017,31:11439–11447.
[11] Medvedovski,Eugene. Alumina–mullite ceramics for structural applications. Ceram Int 2006,32:369–375.
[12] Zhang H, Zhang Y, Wang B, et al. Preparation and characterization of continuous alumina based fiber reinforced with orientated mullite whisker.2015,268:109–115.
[13] Gui K, Liu F, Wang G, et al. Microstructural evolution and performance of carbon fiber-toughened ZrB2 ceramics with SiC or ZrSi2 additive. J Adv Ceram 2018,7:343–351.
[14] Boussois K, Tessier-Doyen N,Blanchart P. Anisotropic kinetic of the kaolinite to mullite reaction sequence in multilayer ceramics. J Eur Ceram Soc 2013,33:243–249.
[15] De Aza A H, Turrillas X, Rodriguez M A, et al. Time-resolved powder neutron diffraction study of the phase transformation sequence of kaolinite to mullite. J Eur Ceram Soc 2014,34:1409–1421.
[16] Dong Y, Feng X, Feng X, et al. Preparation of low-cost mullite ceramics from natural bauxite and industrial waste fly ash. J Alloy Compd 2008,460:599–606.
[17] Hua K, Shui A, Xu L, et al. Fabrication and characterization of anorthite–mullite–corundum porous ceramics from construction waste. Ceram Int 2016,42:6080–6087.
[18] Guo H S, Li W F,Ye F B. Low-cost porous mullite ceramic membrane supports fabricated from kyanite by casting and reaction sintering. Ceram Int 2016,42:4819–4826.
[19] Xu L, Xi X, Zhu W, et al. Investigation on the influence factors for preparing mullite-whisker-structured porous ceramic. J Alloy Compd 2015,649:739–745.
[20] Zhu Z W, Wei Z L, Shen J X, et al. Fabrication and catalytic growth mechanism of mullite ceramic whiskers using molybdenum oxide as catalyst. Ceram Int 2017,43:2871–2875.
[21] Lang Y, Zhao L, Dai X, et al. Effect of alumina fiber content on pore structure and properties of porous ceramics. Int J Appl Ceram Tec 2019,16:814–819.
[22] Wang Z, Feng P Z, Wang X H, et al. Fabrication and properties of freeze-cast mullite foams derived from coal-series kaolin. Ceram Int 2016,42:12414–12421.
[23] Yan S, Pan Y M, Wang L, et al. Synthesis of low-cost porous ceramic microspheres from waste gangue for dye adsorption. J Adv Ceram 2018,7:30–40.
[24] Gröttrup J, Schütt F, Smazna D, et al. Porous ceramics based on hybrid inorganic tetrapodal networks for efficient photocatalysis and water purification. Ceram Int 2017,43:14915–14922.
[25] Lu Q, Dong X, Zhu Z, et al. Environment-oriented low-cost porous mullite ceramic membrane supports fabricated from coal gangue and bauxite. J Hazard Mater 2014,273:136–145.
[26] Serra M F, Conconi M S, Gauna M R, et al. Mullite (3Al2O3·2SiO2) ceramics obtained by reaction sintering of rice husk ash and alumina, phase evolution, sintering and microstructure. J Asian Ceram Soc 2018,4:61–67.
[27] Wang Y, Cheng H, Liu H, et al. Effects of sintering temperature on mechanical properties of 3D mullite fiber (ALF FB3) reinforced mullite composites. Ceram Int 2013,39:9229–9235.
[28] Zhu Z W, Wei Z L, Sun W P, et al. Cost-effective utilization of mineral-based raw materials for preparation of porous mullite ceramic membranes via in-situ reaction method. Apple Clay Sci 2016,120:135–141.
[29] Liu P-F, Li Z, Xiao P, et al. Microstructure and mechanical properties of in-situ grown mullite toughened 3Y-TZP zirconia ceramics fabricated by gelcasting. Ceram Int 2018,44:1394–1403.
[30] Xu X H, Lao X B, Wu J F, et al. In-situ synthesis of SiCw/Al2O3 composite honeycomb ceramics by aluminium-assisted carbothermal reduction of coal series kaolin. Apple Clay Sci 2016,126:122–131.
[31] Dong Y, Zhou J, Lin B, et al. Reaction-sintered porous mineral-based mullite ceramic membrane supports made from recycled materials. J Hazard Mater 2009,172:180–186.
[32] Jing Q, Bao J, Ruan F, et al. The effect of YF3 on the mechanical properties and low-temperature degradation of 3Y-TZP ceramics. Ceram Int 2019,45:24212–24220.
[33] Guo H,Li W. Effects of Al2O3 crystal types on morphologies, formation mechanisms of mullite and properties of porous mullite ceramics based on kyanite. J Eur Ceram Soc 2018,38:679–686.
[34] Deutou J G N, Mohamed H, Nzeukou N A, et al. The role of kyanite in the improvement in the crystallization and densification of the high strength mullite matrix Phase evolution and sintering behaviour. J Therml Anal Calorim 2016,126:1211–1222.