[1] Otsuka K, Ren X. Physical metallurgy of Ti–Ni-based shape memory alloys[J]. Progress in materials science, 2005, 50(5): 511-678.
[2] Shape memory and superelastic alloys: technologies and applications[M]. Woodhead Publishing, 2011.
[3] Mohd Jani J, Leary M, Subic A and Gibson M A 2014 A review of shape memory alloy research, applications and opportunities Mater. Des. 56 1078–113
[4] Elahinia M, Hashemi M, Tabesh M and Bhaduri S B 2012 Manufacturing and processing of NiTi implants: a review Prog. Mater. Sci. 57 911–46
[5] Duerig T, Pelton A and Stöckel D 1999 An overview of nitinol medical applications Mater. Sci. Eng. A 15 149–60
[6] Braz Fernandes F M, Oliveira J P, Machado A and Schell N XRD study of NiTi endodontic files using synchrotron radiation J. Mater. Eng. Perform. 23 2477–81
[7] McDonald Schetky L 1991 Shape memory alloy applications in space systems Mater. Des. 12 29–32
[8] Stoeckel D 1990 Shape memory actuators for automotive applications Mater. Des. 11 302–7
[9] Frenzel J, George E P, Dlouhy A, et al. Influence of Ni on martensitic phase transformations in NiTi shape memory alloys[J]. Acta Materialia, 2010, 58(9): 3444-3458.
[10] Mehrpouya M, Gisario A, Broggiato G B, et al. Effect of welding parameters on functionality of dissimilar laser-welded NiTi superelastic (SE) to shape memory effect (SME) wires[J]. The International Journal of Advanced Manufacturing Technology, 2019, 103(1): 1593-1601.
[11] Zeng Z, Yang M, Oliveira J P, et al. Laser welding of NiTi shape memory alloy wires and tubes for multi-functional design applications[J]. Smart Materials and Structures, 2016, 25(8).
[12]. Zamani N, Khamesee MB, Khan MI (2017) Novel laser processed shape memory alloy actuator design with an embedded strain gauge sensor using dual resistance measurements. Part I: Fabrication and model-based position estimation. Sensors Actuators A Phys 263:234–245
[13]. Engeberg ED, Dilibal S, Vatani M, Choi JW, Lavery J (2015) Anthropomorphic finger antagonistically actuated by SMA plates, Bioinspir Biomim 10(5):056002
[14] Stoeckel D. Forming of nitinol–a challenge[J]. New Developments in Forging Technolog, 2001: 119-134.
[15] Wu S K, Lin H C, Chen C C. A study on the machinability of a Ti49. 6Ni50. 4 shape memory alloy[J]. Materials Letters, 1999, 40(1): 27-32.
[16] Biermann D, Kahleyss F, Krebs E, et al. A study on micro-machining technology for the machining of NiTi: five-axis micro-milling and micro deep-hole drilling[J]. Journal of materials engineering and performance, 2011, 20(4-5): 745-751.
[17] Bellouard Y. Shape memory alloys for microsystems: A review from a material research perspective[J]. Materials Science and Engineering: A, 2008, 481: 582-589.
[18]. Mehrpouya M, Shahedin AM, Daood Salman Dawood S, Kamal Ariffin A (2017) An investigation on the optimum machinability of NiTi based shape memory alloy. Mater Manuf Process 32(13): 1497–1504
[19]. MehrpouyaM, Gisario A, ElahiniaM(2018) Laser welding of NiTi shape memory alloy: a review. J Manuf Process 2018(31):162–186
[20] Tam B, Khan M and Zhou Y 2011 Mechanical and functional properties of laser-welded Ti-55.8 Wt Pct Ni nitinol wires Metall. Mater. Trans. A 42 2166–75
[21] Falvo A, Furgiuele F M and Maletta C 2005 Laser welding of a NiTi alloy: mechanical and shape memory behaviour Mater. Sci. Eng. A 412 235–40
[22] Bormann T, Schumacher R, Müller B, et al. Tailoring selective laser melting process parameters for NiTi implants[J]. Journal of Materials Engineering and Performance, 2012, 21(12): 2519-2524.
[23] Wang X, Kustov S, Van Humbeeck J. A short review on the microstructure, transformation behavior and functional properties of NiTi shape memory alloys fabricated by selective laser melting[J]. Materials, 2018, 11(9): 1683.
[24] Dadbakhsh S, Speirs M, Kruth J P, et al. Effect of SLM parameters on transformation temperatures of shape memory nickel titanium parts[J]. Advanced Engineering Materials, 2014, 16(9): 1140-1146.
[25]Haberland C, Elahinia M, Walker J M, et al. On the development of high quality NiTi shape memory and pseudoelastic parts by additive manufacturing[J]. Smart materials and structures, 2014, 23(10): 104002.
[26]Bormann T, Müller B, Schinhammer M, et al. Microstructure of selective laser melted nickel–titanium[J]. Materials characterization, 2014, 94: 189-202.
[27]Khoo Z X, Liu Y, An J, et al. A review of selective laser melted NiTi shape memory alloy[J]. Materials, 2018, 11(4): 519.
[28]Elahinia M, Moghaddam N S, Andani M T, et al. Fabrication of NiTi through additive manufacturing: A review[J]. Progress in Materials Science, 2016, 83: 630-663.
[29] Nguyen D, Park H, Lee C, et al. Applying Selective Laser Melting to Join Al and Fe: An Investigation of Dissimilar Materials[J]. Applied Sciences, 2019, 9(15).
[30] Qian T, Liu D, Tian X, et al. Microstructure of TA2/TA15 graded structural material by laser additive manufacturing process[J]. Transactions of Nonferrous Metals Society of China, 2014, 24(9): 2729-2736
[31] Demir A G, Previtali B. Multi-material selective laser melting of Fe/Al-12Si components[J]. Manufacturing letters, 2017: 8-11.