4.1 Materials and Method
All solvents were of reagent grade and were purchased from Fisher Scientific. All chemicals are of reagent grade and purchased from Sigma-Aldrich (Massachusetts, USA) or Ambeed, Inc. (Illinois, USA) or Oakwood Products, Inc. (South Carolina, USA), Column chromatography was carried out using silica gel (Sorbent Technologies (Georgia, USA) 230−400 mesh). TLC analyses were conducted on silica gel plates (Sorbent Technologies (Georgia, USA) Silica XHL TLC plates w/UV254). 1H NMR (400 MHz) and 13C NMR (100 MHz) spectra were recorded on a Bruker Avance 400 MHz NMR spectrometer in deuterated solvent from Oakwood Products, Inc. (South Carolina, USA). Chemical shifts were reported as δ values (ppm). TMS (δ = 0.00 ppm) or residual peaks of the deuterated solvent were used as the internal reference. Mass spectrometric analyses were conducted by the Georgia State University Mass Spectrometry Facilities. The milligram scale quantities were weighed on C-33 microbalance (CAHN instruments Inc., California, USA). HPLC was performed on Shimadzu LC-20AT or Agilent HPLC system. Column: C18, 5 µm, 4.6 × 150 mm; detector: DAD monitored at 254 nm.
Mobile phase composed of A: H2O (0.1% TFA) and B: ACN (0.1% TFA). Gradient methods used: Analytical HPLC Method: 5% B, 0-10 min; 95% B, 10-12 min; 5% B, 12-12.1 min; 5% B, 12.1-15 min.
Preparative HPLC Method: 30% B, 0-18 min; 45% B, 18-18.1 min; 30% B, 18.1-20.0 min.
4.1.1 Determination of second order rate constant for folate conjugated CO prodrug
10 mM stock solutions of compounds 19a/19b or 11 were prepared in DMSO. 50 µM of dienone (19a/19b) was incubated at 37 oC in 1.5 ml of cuvette with different concentration of cycloalkyne 11 (1.0 mM, 1.4 mM, 1.8 mM) in 60% DMSO:PBS The reaction progress is monitored by measuring the fluorescence intensity at 464 nm at frequent time intervals (λex= 375 nm). A plot of fluorescent intensity against time provided the pseudo first order rate constant. Next, plotting the k’ values against the different concentrations of 11 provided the second order rate constant. (Fig. 4. A-D). A similar protocol was used for the control compound dienone 20 (50 µM), but a higher concentration range of cycloalkyne 21 (1.8 mM, 2.2 mM, 2.6 mM) (Fig. 4. E-H).
4.1.2 Cell-Imaging Experiment
The intracellular CO release from the folate conjugated CO prodrugs were studied by using fluorescent cell imaging. Literature reports indicate that the cell-culture in folate depleted medium helps in the FR over-expression (FR+ cells) and facilitates increased uptake of folate conjugates.[60]Thus, KB cells were cultured in two different media, one of the plates is cultured in normal RPMI-1540 (Gibco)) medium and other plate is cultured in folic acid depleted RPMI-1540 medium (Gibco). Both the medium is supplemented with 10% fetal bovine serum (FBS, Gibco) and 0.1% 100 x antibiotic-antimycotic solution (Gibco). To begin with, folate conjugated CO prodrug partners 11 and 19b were co-incubated with normal KB and FR+-KB cells. Fluorescence images were recorded on 4 h and 16 h time point after incubation. Similarly, a control experiment is performed by incubating 4 h KB and FR+-KB cells with non-folate conjugated dienone 20 and cycloalkyne 21.
4.1.3 Synthetic procedure for the designed compounds
N2-(4-(((2-amino-4-oxo-3,4-dihydropteridin-6-yl)methyl)amino)benzoyl)-N5-(2-((tert-butoxycarbonyl)amino)ethyl)-L-glutamine (8)
Synthesized by a reported literature procedure.[55]
Folic acid was (320 mg, 0.73 mmol) was added to 8 ml of DMSO and heated at 55 oC for 30 min to get a clear solution. The solution was cooled to room temperature and added N-hydroxy succinimide (167 mg, 1.46 mmol) and DCC (301 mg, 1.46 mmol) under nitrogen atmosphere and protected from light, stirred at room temperature for 20 h. After 20 h of stirring, the urea precipitate was filtered off and the obtained solution is used for the next step by adding triethylamine (203 µL, 1.46 mmol) followed by N-Boc-ethylenediamine (234 mg, 1.46 mmol) and stirred for 16 h. Once the reaction is completed, 20% acetone in diethyl ether solution is added to the reaction mixture and the resulting light-yellow precipitate is collected with the aid of centrifugation. The HPLC analysis of the reaction mixture indicates a product formation with a new peak with almost 20% of folic acid remain unreacted which was further purified by preparative HPLC (Shimadzu HPLC-0.1% TFA in ACN/ H20; Method 0-18 min 30%-45%, flowrate 16 ml/min). The purity of the obtained product was confirmed by recording the 1H NMR and matching the literature reports[56, 55] The compound isolated as yellow solid, 267 mg, yield: 63 %. 1H NMR (DMSO- d6) δ 11.52 (s, 1H), 8.66 (d, J = 15.1 Hz, 1H), 8.04 (d, J = 7.1 Hz, 1H), 7.86 (d, 1H), 7.70 (dd, 8.5 Hz, 2H), 6.96 (s, 2H), 6.74 (dd, J = 11.1 Hz, 2H), 6.63 (d, J = 8.6 Hz, 2H), 4.52 (s, 2H), 4.28 (s, 1H), 3.15 – 3.02 (m, 2H), 2.96 (s, 2H), 2.19 – 1.78 (m, 4H), 1.35 (d, J = 6.1 Hz, 9H).
N2-(4-(((2-amino-4-oxo-3,4-dihydropteridin-6-yl)methyl)amino)benzoyl)-N5-(2-aminoethyl)-L-glutamine (9)
Synthesized by using a previous literature procedure.[55]
Compound 8 (200 mg, 0,34 mmol) was dissolved in 5 ml of TFA and stirred at room temperature for 3 h, the reaction progress was monitored by HPLC and once the reaction is completed, the excess TFA is evaporated with the aid of 5 ml DCM and the resulting content of the flask is dissolved in 2 ml of DMF, and the product is precipitated by the slow addition of triethylamine (~ 700 µL). The light-yellow solid precipitate is collected by centrifugation to obtain compound 9 with quantitative yield. This product is used for the subsequent conjugation steps with CO prodrug partners.1H NMR (DMSO- d6) δ 8.61 (s, 1H), 8.10 (s, 1H), 7.96 (s, 2H), 7.66 (d, J = 6.9 Hz, 2H), 7.17 (s, 2H), 6.96 (s, 1H), 6.64 (d, J = 7.7 Hz, 2H), 4.48 (s, 2H), 4.28 (s, 1H), 3.13 (s, 2H), 3.11 (s, 2H), 2.63 (s, 2H), 2.12 (d, 2H), 2.12 – 1.92 (m, 2H), 1.84 (d, J = 10.3 Hz, 2H).
((1R,8S,9s)-bicyclo[6.1.0]non-4-yn-9-yl)methyl (4-nitrophenyl) carbonate (10)
((1R,8S,9s)-bicyclo[6.1.0]non-4-yn-9-yl)methanol (50 mg, 0.33mmol) and pyridine (107 µL, 1.3 mmol) was dissolved in DCM and stirred at room temperature for 10 minutes. To this solution 4-nitrophenyl chloroformate (102 mg, 0.5 mmol) was added and stirred at room temperature for 4 h under nitrogen atmosphere. The reaction mixture is worked up with 0.1 M HCl for three times and collected organic layer is dried over anhydrous Na2SO4 and concentrated in vacuo. The crude product was purified by silica gel column chromatography (Hexane: Ethyl acetate = 80:20) to afford compound 10 as pure white solid, 60 mg, yield: 57 %. 1H NMR (CDCl3) δ 8.30 (d, J = 9.2 Hz, 2H), 7.37 (t, 2H), 4.42 (d, J = 8.3 Hz, 2H), 2.64 – 2.13 (m, 6H), 1.70 – 1.45 (m, 3H), 1.22 – 0.90 (m, 2H); 13C NMR (CDCl3) δ 155.6, 152.6, 145.4, 125.3, 121.8, 98.7, 68.0, 29.0, 21.4, 20.5, 17.2; HRMS (ESI+) m/z calcd for C17H17NO5Na 338.1004, found 338.1009 [M+Na]+.
N2-(4-(((2-amino-4-oxo-3,4-dihydropteridin-6-yl)methyl)amino)benzoyl)-N5-(2-(((((1R,8S,9s)-bicyclo[6.1.0]non-4-yn-9-yl)methoxy)carbonyl)amino)ethyl)-L-glutamine (11)
Synthesized by using a previous literature procedure.[55]
To a solution of compound 9 (25 mg, 0.052 mmol) in 1.5 ml anhydrous DMSO, was added NN-Diisopropylethylamine (27 µL, 0.156 mmol) and compound 10 (18 mg, 0.057 mmol) and stirred for 1.5 h to get a bright-yellow colored solution. The reaction mixture was added to a solution of 20% acetone in diethyl ether and the resulting light-yellow precipitate is collected by centrifugation. The resulting precipitate is washed three times with acetone and diethyl ether and the pure precipitate is collected by centrifugation and air dried for 24 h. The purity of the obtained product was confirmed by recording the 1H NMR and matching the literature reports.[56, 55] The product is isolated as a yellow solid, 29 mg, yield: 86%.1H NMR (DMSO-d6) δ 8.63 (s, 1H), 8.04 (s, 1H), 7.90 (s, 1H), 7.67 (s, 2H), 7.09 (d, J = 13.1 Hz, 1H), 6.96 (s, 2H), 6.63 (d, J = 8.5 Hz, 2H), 4.48 (s, 2H), 4.28 (s, 1H), 4.08 – 3.92 (m, 2H), 3.09 (s, 2H), 3.01 (s, 2H), 2.04 (dt, 10H), 1.51 (s, 2H), 1.24 (s, 2H), 0.84 (s, 2H).
6-hydroxy-2,2-dimethyl-5-(2-phenylacetyl)-4H-1,3-dioxin-4-one (13a)
Synthesized by a previously reported literature procedure.[45]
To a solution of Meldrum’s acid (1.0 g, 6.9 mmol) and pyridine (1.1 mL, 13.8 mmol) in dichloromethane (15 ml) under ice-cold temperature was added a solution of phenylacetyl chloride (1.278 g ,8.3 mmol.) drop by drop. After the completion of addition, the reaction was allowed to stir at room temperature, and stirred for an additional 3 h. The reaction mixture was then washed successively with 5% HCl solution and brine. The organic layer was dried with anhydrous Na2SO4, filtered and concentrated. The obtained residue was purified by silica gel column chromatography (Hexane: ethyl acetate = 7:3) to afford compound 13a as white solid,1030 mg, yield: 57 %.
tert-butyl 3-oxo-4-phenylbutanoate(14a)
Compound 13a (500 mg, 1.90 mmol) was dissolved in 8 ml of tert-butanol and refluxed at 85 oC for 3 h. Upon completion of the reaction, the content of the flask was evaporated to dryness to obtain yellow viscous liquid with quantitative yield (422 mg). 1H NMR (CDCl3) δ 7.38 – 7.29 (m, 3H), 7.22 (d, J = 7.2 Hz, 2H), 3.82 (s, 2H), 3.39 (s, 2H), 1.48 (s, 10H); 13C NMR (CDCl3) δ 200.9, 166.4, 133.5, 129.7, 128.8, 127.3, 81.9, 49.9, 49.6, 28.3, 28.0; HRMS (ESI+) m/z calcd for C14H19O3 235.1334, found 235.1336 [M+H]+.
tert-butyl 8-oxo-9-phenyl-8H-cyclopenta[a]acenaphthylene-7-carboxylate (15a)
A solution of compound 14a (400 mg 1.71 mmol), and acenaphthylene-1, 2-dione (373 mg, 2.05 mmol.) in THF/MeOH (3/1, v/v, 12 ml) was treated with Et3N (362 µL, 2.6 mmol). Then the mixture was stirred at room temperature for 3 h, after which the mixture was concentrated under vacuum, and the resulting residue was dissolved in acetic anhydride (4 mL). The resulting solution was cooled to 0 oC, and 2 drops of concentrated sulfuric acid was added. The reaction mixture was stirred for an additional 10 min at 0 oC and the reaction mixture was diluted with ethyl acetate (30 ml) and washed with NaHCO3 solution. The organic layer was dried over anhydrous Na2SO4. After concentration, the residue was purified over silica gel column (Hexane: Ethyl acetate 99: 1) to yield compound 15a as purple solid, 467 mg, yield: 72%.1H NMR (CDCl3) δ 8.77 (d, J = 7.1 Hz, 1H), 8.04 (dd, J = 7.4, 5.7 Hz, 2H), 7.92 (d, J = 8.2 Hz, 1H), 7.84 – 7.72 (m, 3H), 7.66 – 7.59 (m, 1H), 7.54 (t, J = 7.5 Hz, 2H), 7.46 (d, J = 7.3 Hz, 1H), 1.70 (s, 9H); 13C NMR (CDCl3) δ 197.3, 168.4, 161.9, 150.8, 144.9, 131.5, 130.7, 130.4, 130.4, 130.1, 129.6, 128.9, 128.8, 128.6, 128.3, 127.9, 127.7, 123.60, 121.1, 111.8, 81.5, 28.5; HRMS (ESI+) m/z calcd for C26H21O3 381.1491, found 381.1501 [M+H]+.
8-oxo-9-phenyl-8H-cyclopenta[a]acenaphthylene-7-carboxylic acid (16a)
A solution of compound 15a (450 mg, 1.18 mmol) in 3 ml dichloromethane was cooled to 0 oC, to which was added trifluoroacetic acid (12 ml) as dropwise and allowed to stir for 2 h. The reaction mixture was concentrated in vacuo and used for the next step without further purification (363 mg).
tert-butyl(2-(N-methyl-8-oxo-9-phenyl-8H-cyclopenta[a]acenaphthylene-7-carboxamido)ethyl)carbamate (17a)
To a solution of compound 16a (325 mg, 1.0 mmol) in DCM, was added EDC (288 mg, 1.5 mmol) and DMAP (183 mg, 1.5 mmol) and tert-butyl (2 (methylamino)ethyl) carbamate (261mg, 1.5 mmol) andallowed to stir at room temperature for overnight. Once the reaction is completed, the reaction mixture is diluted with DCM and washed with 0.1 N HCl for 3 times, followed by 3 times with brine and the organic layer is collected and dried over anhydrous Na2SO4 and concentrated in-vacuo and purified by silica gel flash column chromatography (Hexane: Ethyl acetate (95:5) to get the compound 17a as reddish brown solid, 404 mg, yield: 84%.1H NMR (CDCl3) δ 7.95 (dd, J = 10.8, 7.2 Hz, 2H), 7.89 (d, J = 8.1 Hz, 1H), 7.82 (d, J = 8.2 Hz, 1H), 7.75 (d, J = 7.5 Hz, 2H), 7.62 (t, J = 7.6 Hz, 1H), 7.57 – 7.44 (m, 3H), 7.39 (t, J = 7.3 Hz, 1H), 5.49 (s, 1H), 3.72 (d, J = 5.3 Hz, 2H), 3.56 – 3.41 (m, 2H), 3.11 (s, 3H), 1.45 (s, 9H); 13C NMR (CDCl3) δ 198.8, 165.2, 162.8,156.3,151.9, 145.1, 131.8, 130.8, 130.7, 129.9, 129.4, 129.2, 128.8, 128.7, 128.5, 127.9, 124.8, 122.4, 121.2, 115.8,79.3, 46.9, 38.9, 37.3, 28.5; HRMS (ESI+) m/z calcd for C30H29N2O4 481.2127, found 481.2119 [M+H]+.
N-(2-aminoethyl)-N-methyl-8-oxo-9-phenyl-8H-cyclopenta[a]acenaphthylene-7-carboxamide (18a)
A solution of compound 17a (200 mg, 0.42 mmol) in DCM (3 ml) was cooled to 0 oC, to which was added trifluoroacetic acid (6 ml) as dropwise and allowed to stir for 2 h. The reaction mixture was concentrated in vacuo with the aid of DCM and used for the next step without further purification.
N2-(4-(((2-amino-4-oxo-3,4-dihydropteridin-6-yl)methyl)amino)benzoyl)-N5-(2-(N-methyl-8-oxo-9-phenyl-8H-cyclopenta[a]acenaphthylene-7-carboxamido)ethyl)glutamine (19a)
To a solution of compound 7 (25 mg, 0.05 mmol) in DMSO was added triethylamine (11.4 µL, 0.08 mmol) and followed by compound 18a (31 mg, 0.08 mmol) and stirred at room temperature for 30 min. The product is precipitated as a dark brown precipitate by the addition of 20% acetone in diethyl ether, which was washed three times with diethyl ether and three times with acetone and collected by the aid of centrifugation to get compound 19a as reddish brown solid, 24 mg, yield: 54%. HRMS (ESI-) m/z calcd for HRMS calculated for C44H36N9O7 802.2738, found 802.2737 [M-H]+. Further confirmed by LC-MS.
6-hydroxy-2,2-dimethyl-5-(2-(4-(trifluoromethyl)phenyl)acetyl)-4H-1,3-dioxin-4-one (13b): To a solution of Meldrum’s acid (1.0 g, 6.9 mmol) and pyridine (1.1 mL, 13.8 mmol) in dichloromethane (15 ml) under ice-cold temperature was added a solution of 2-(4-(trifluoromethyl)phenyl)acetyl chloride (1.84 g ,8.3 mmol.) drop by drop. After the completion of addition, the reaction was allowed to stir at room temperature, and stirred for an additional 6 h. The reaction mixture was then washed successively with 5% HCl solution and brine. The organic layer was dried with anhydrous Na2SO4, filtered and concentrated. The obtained residue was purified by silica gel column chromatography (Hexane: ethyl acetate = 7:3) to afford compound 13b as white solid,1297 mg, yield: 59 %. 1H NMR (CDCl3) δ 15.40 (s, 1H), 7.61 (d, J = 8.2 Hz, 2H), 7.53 (d, J = 8.2 Hz, 2H), 4.49 (s, 2H), 1.74 (d, J = 5.8 Hz, 6H). 13C NMR (CDCl3) δ 193.3, 170.5, 160.3, 138.0, 130.0, 129.7, 125.7, 122.7, 105.3, 91.8, 40.6, 26.9. HRMS (ESI-) m/z calcd for C15H13F3O5 329.0637, found 329.0639 [M-H]+.
tert-butyl 3-oxo-4-(4-(trifluoromethyl)phenyl)butanoate(14b): Compound 13b (660 mg, 2 mmol) was dissolved in 10 ml of t-butanol and the reaction was refluxed for 4 h at 85 oC. The reaction mixture was concentrated in vacuo to give compound 14b as slight yellow viscous liquid, 565 mg, yield: 92%.1H NMR (CDCl3) δ 7.61 (d, J = 8.1 Hz, 2H), 7.34 (d, J = 8.0 Hz, 2H), 3.93 (s, 2H), 3.43 (s, 2H), 1.48 (s, 9H). 13C NMR (CDCl3) δ 199.9, 166.1, 137.3, 130.1, 129.7, 125.6, 122.8, 82.4, 50.0, 49.3, 28.0. HRMS (ESI+) m/z calcd for C15H18F3O3 303.1208, found 303.1215 [M+H] +.
tert-butyl8-oxo-9-(4-(trifluoromethyl)phenyl)-8H-cyclopenta[a]acenaphthylene-7-carboxylate (15b):To a solution of compound 14b (565 mg, 1.87 mmol), and acenaphthylene-1, 2-dione (373 mg, 2.05 equiv.) in 10 ml DMF was added triethylamine (390 µL, 2.8 mmol). Then the mixture was stirred at room temperature for 3 h, after which the mixture was concentrated under vacuum, and the resulting residue was dissolved in acetic anhydride (4 ml). The resulting solution was cooled to 0 oC, and 2 drops of concentrated H2SO4 was added. The reaction mixture was stirred for an additional 10 min at 0 oC, The reaction mixture was diluted with ethyl acetate (30 ml), and washed with water. The organic layer was dried over anhydrous Na2SO4. After concentration, the residue was purified over silica gel column (Hexane: Ethyl acetate 99: 1) to yield compound 15b as pure purple solid 603 mg, yield: 79%.1H NMR (CDCl3) δ 8.41 (d, J = 7.1 Hz, 1H), 7.84 – 7.62 (m, 7H), 7.52 (t, J = 7.7 Hz, 1H), 7.40 (t, J = 7.6 Hz, 1H), 1.70 (s, 9H).13C NMR (CDCl3) δ 196.3, 167.5, 161.5, 152.4, 144.8, 134.2, 131.4, 130.4, 130.3, 129.67, 129.6, 129.5, 128.8, 128.3, 128.2, 128.0, 125.4, 122.7, 121.4, 121.3, 112.0, 81.7, 28.5. HRMS (ESI+) m/z calcd for C27H19F3O3 449.1365, found 449.1361[M+H]+.
8-oxo-9-(4-(trifluoromethyl)phenyl)-8H-cyclopenta[a]acenaphthylene-7-carboxylic acid(16b): A solution of compound 15b (0.526 mmol) in 5 ml dichloromethane was cooled to 0 oC, to which was added trifluoroacetic acid (0.2 ml) as dropwise and allowed to stir for 2 h. The reaction mixture was concentrated in vacuo and used for the next step without further purification.
tert-butyl(2-(N-methyl-8-oxo-9-(4-(trifluoromethyl)phenyl)-8H-cyclopenta[a]acenaphthylene-7-carboxamido)ethyl)carbamate (17b).
To a solution of compound 16b (300 mg, 0.76 mmol) in DCM, was added EDC (220 mg, 1.14 mmol), DMAP (139 mg, 1.14 mmol) and followed by tert-butyl (2 (methylamino)ethyl) carbamate (198 mg, 1.14 mmol). The reaction mixture was allowed to stir at room temperature overnight. Once the reaction is completed, the reaction mixture is diluted with DCM and washed with 0.1 N HCl for 3 times, followed by 3 times with brine and the organic layer is collected and dried over anhydrous Na2SO4 and concentrated in-vacuo and purified by silica gel column chromatography (Hexane: Ethyl acetate (99: 1) to get the compound 17b as purple solid, 350 mg, yield: 88%. 1H NMR (CDCl3) δ 7.94 (m, J = 20.1 Hz, 6H), 7.77 (d, J = 8.1 Hz, 2H), 7.68 (dd, J = 9.7, 5.5 Hz, 1H), 7.60 (t, J = 7.5 Hz, 1H), 5.45 (s, 1H), 3.75 (d, J = 5.6 Hz, 2H), 3.52 (d, J = 16.9, 2H), 3.14 (s, 3H), 1.48 (s, 9H). 13C NMR (CDCl3) δ 198.2, 164.9, 162.3, 156.3, 154.0, 145.3, 134.4, 131.9, 130.4, 129.6,129.6, 129.4, 129.0, 128.6, 125.6, 125.0, 122.7, 121.6, 120.7, 116.2, 79.5, 46.9, 38.8, 37.2, 28.8. HRMS (ESI+) m/z calcd for C31H28F3N2O4 549.2001; found 549.2028 [M+H]+.
N-(2-aminoethyl)-N-methyl-8-oxo-9-(4-(trifluoromethyl)phenyl)-8H-cyclopenta[a]acenaphthylene-7-carboxamide (18b): Compound 17b (350 mg, 0.64 mmol) was dissolved in 10 ml solution of DCM: TFA (1:2), and was stirred under ice bath for 2 h. After completing the reaction, the contents of the flask was evaporated and the product obtained is used for the next step without further purification.
N2-(4-(((2-amino-4-oxo-3,4-dihydropteridin-6-yl)methyl)amino)benzoyl)-N5-(2-(N-methyl-8-oxo-9-(4-(trifluoromethyl)phenyl)-8H-cyclopenta[a]acenaphthylene-7-carboxamido)ethyl)glutamine (19b): To a solution of compound 7 (25 mg, 0.05 mmol) in DMSO was added triethylamine (11.4 µL, 0.08 mmol) and followed by compound 18b (36 mg, 0.08 mmol) and stirred at room temperature for 30 min. The product is precipitated as a dark brown precipitate by the addition of 20% acetone in ethyl ether, which was washed three times with diethyl ether and three times with acetone and collected by the aid of centrifugation to get compound 19b as brown solid, 24 mg, yield: 58 %. HRMS (ESI-) m/z calcd for HRMS calculated for C45H35F3N9O7 870.2612, found 870.2617 [M-H]+. Further confirmed by LC-MS.
N-ethyl-N-methyl-8-oxo-9-(4-(trifluoromethyl)phenyl)-8H-cyclopenta[a]acenaphthylene-7-carboxamide (20) To a solution of compound 16b (200 mg, 0.51 mmol) in DCM was added (85 µL, 1.02 mmol) of oxalyl chloride and 2 drop of DMF, allowed to stir at room temperature in inert atmosphere for 2 h. Once the reaction is completed the contents of the flask was evaporated to dryness and added N-methylethanamine (174 µL, 1.02 mmol), triethylamine (145 µL, 1.02 mmol) and stirred at room temperature for 1.5 h. On reaction completion, the reaction mixture was washed 3 times with 0.1 N HCl and brine. The organic layer was collected and dried over anhydrous Na2SO4 and concentrated in vacuo, purified by silica gel column chromatography (Hexane: Ethyl acetate (90: 10) to obtain a purple solid 139 mg, yield: 63%. 1H NMR (CDCl3) δ 7.67-8.05(m, 2H), 7.73 (d, J=8.0 Hz, 4H), 7.66-7.70(m, 2H), 7.62(t, J = 8.2 Hz, 2H), 3.66 (q, 2H), 3.45 (q, 2H), 3.16 (s, 3H), 3.09 (s, 3H), 1.31(t, 3H), 1.22(t, 3H). 13C NMR (CDCl3) δ 198.38, 163.83, 161.0, 154.00, 145.25, 134.51, 131.95, 130.51,130.28, 129.83, 129.4, 129.3, 128.9, 128.6, 125.4, 124.5,122.71, 121.5, 120.7, 116.9, 45.9, 42.3, 36.1, 32.17, 14.0, 12.3. HRMS (ESI+) m/z calcd for C26H19F3NO2 434.1368, found 434.1363 (M+H)+.