(1) Schwartz, A. M., Farley, K. X., Guild, G. N. and Bradbury, T. L., Jr. (2020), “Projections and Epidemiology of Revision Hip and Knee Arthroplasty in the United States to 2030,” J Arthroplasty 35, 6S, pp. S79-S85.
(2) Patil, N. A., Njuguna, J. and Kandasubramanian, B. (2020), “UHMWPE for biomedical applications: Performance and functionalization,” European Polymer Journal 125.
(3) Hussain, M., Naqvi, R. A., Abbas, N., Khan, S. M., Nawaz, S., Hussain, A., Zahra, N. and Khalid, M. W. (2020), “Ultra-High-Molecular-Weight-Polyethylene (UHMWPE) as a Promising Polymer Material for Biomedical Applications: A Concise Review,” Polymers (Basel) 12, 2.
(4) Spece, H., Schachtner, J. T., MacDonald, D. W., Klein, G. R., Mont, M. A., Lee, G. C. and Kurtz, S. M. (2019), “Reasons for Revision, Oxidation, and Damage Mechanisms of Retrieved Vitamin E-Stabilized Highly Crosslinked Polyethylene in Total Knee Arthroplasty,” J Arthroplasty 34, 12, pp. 3088-3093.
(5) Merola, M. and Affatato, S. (2019), “Materials for Hip Prostheses: A Review of Wear and Loading Considerations,” Materials (Basel) 12, 3.
(6) Broomfield, J. A., Malak, T. T., Thomas, G. E., Palmer, A. J., Taylor, A. and Glyn-Jones, S. (2017), “The Relationship Between Polyethylene Wear and Periprosthetic Osteolysis in Total Hip Arthroplasty at 12 Years in a Randomized Controlled Trial Cohort,” J Arthroplasty 32, 4, pp. 1186-1191.
(7) Suraci, A., Louati, H., Culliton, K. N. and Beaule, P. E. (2019), “Comparing In Vivo Performance of Two Highly Cross-Linked Polyethylene Thermal Treatments: Remelting vs Annealing in Acetabular Liners,” J Arthroplasty 34, 7, pp. 1509-1513.
(8) Lachiewicz, P. F. and Soileau, E. S. (2016), “Highly Cross-linked Polyethylene Provides Decreased Osteolysis and Reoperation at Minimum 10-Year Follow-Up,” J Arthroplasty 31, 9, pp. 1959-1962.
(9) Kurtz, S. M. (2016), “UHMWPE Biomaterials Handbook,” Editon Edition, Matthew Deans.
(10) Oral, E., Ghali, B. W., Rowell, S. L., Micheli, B. R., Lozynsky, A. J. and Muratoglu, O. K. (2010), “A surface crosslinked UHMWPE stabilized by vitamin E with low wear and high fatigue strength,” Biomaterials 31, 27, pp. 7051-7060.
(11) Ries, M. D. and Pruitt, L. (2005), “Effect of cross-linking on the microstructure and mechanical properties of ultra-high molecular weight polyethylene,” Clin Orthop Relat Res 440, pp. 149-156.
(12) Bracco, P., Costa, L., Luda, M. P. and Billingham, N. (2018), “A review of experimental studies of the role of free-radicals in polyethylene oxidation,” Polymer Degradation and Stability 155, pp. 67-83.
(13) Oral, E., Doshi, B. N., Gul, R. M., Neils, A. L., Kayandan, S. and Muratoglu, O. K. (2017), “Peroxide cross-linked UHMWPE blended with vitamin E,” J Biomed Mater Res B Appl Biomater 105, 6, pp. 1379-1389.
(14) Wypych, G. (2020), “Handbook of Antioxidants,” Editon Edition.
(15) Currier, B. H., Currier, J. H., Holdcroft, L. A. and Van Citters, D. W. (2018), “Effectiveness of anti-oxidant polyethylene: What early retrievals can tell us,” Journal of biomedical materials research. Part B, Applied biomaterials 106, 1, pp. 353-359.
(16) Kirschweng, B., Tátraaljai, D., Földes, E. and Pukánszky, B. (2017), “Natural antioxidants as stabilizers for polymers,” Polymer Degradation and Stability 145, pp. 25-40.
(17) Grupp, T. M., Fritz, B., Kutzner, I., Schilling, C., Bergmann, G. and Schwiesau, J. (2017), “Vitamin E stabilised polyethylene for total knee arthroplasty evaluated under highly demanding activities wear simulation,” Acta Biomater 48, pp. 415-422.
(18) Turner, A., Okubo, Y., Teramura, S., Niwa, Y., Ibaraki, K., Kawasaki, T., Hamada, D., Uetsuki, K. and Tomita, N. (2014), “The antioxidant and non-antioxidant contributions of vitamin E in vitamin E blended ultra-high molecular weight polyethylene for total knee replacement,” J Mech Behav Biomed Mater 31, pp. 21-30.
(19) Takahashi, Y., Yamamoto, K. and Pezzotti, G. (2015), “Effects of vitamin E blending on plastic deformation mechanisms of highly crosslinked ultrahigh molecular weight polyethylene (HXL-UHMWPE) in total hip arthroplasty,” Acta Biomater 15, pp. 227-236.
(20) Shah, N. A., Hong, R., Yang, X., Huang, S.-S., Gul, R. M., Liu, Y., Li, L., Xu, J.-Z., Li, K. and Li, Z.-M. (2023), “Synergy stabilization of vitamin E and D-sorbitol on crosslinked ultrahigh molecular weight polyethylene for artificial joint under in-vitro clinically relevant accelerated aging,” Polymer Degradation and Stability 214.
(21) Shah, N. A., Ren, Y., Lan, R. T., Lv, J. C., Gul, R. M., Tan, P. F., Huang, S., Tan, L., Xu, J. Z. and Li, Z. M. (2021), “Ultrahigh molecular weight polyethylene with improved crosslink density, oxidation stability, and microbial inhibition by chemical crosslinking and tea polyphenols for total joint replacements,” Journal of Applied Polymer Science 138, 43, pp. 51261-51261.
(22) Ren, Y., Zhang, Z. Y., Lan, R. T., Xu, L., Gao, Y., Zhao, B., Xu, J. Z., Gul, R. M. and Li, Z. M. (2019), “Enhanced oxidation stability of highly cross-linked ultrahigh molecular weight polyethylene by tea polyphenols for total joint implants,” Mater Sci Eng C Mater Biol Appl 94, pp. 211-219.
(23) Ren, Y., Wei, X., Wei, S. T., Wang, F. Y., Wang, J., Xu, J. Z., Xu, L., Gul, R. M. and Li, Z. M. (2019), “High Oxidation Stability of Tea Polyphenol-stabilized Highly Crosslinked UHMWPE Under an in Vitro Aggressive Oxidative Condition,” Clin Orthop Relat Res 477, 8, pp. 1947-1955.
(24) Wang, F. Y., Ren, Y., Lan, R. T., Fu, W. Q., Chen, Z. J., Huang, S., Gul, R. M., Wang, J., Xu, J. Z. and Li, Z. M. (2021), “Controlled bacteriostasis of tea polyphenol loaded ultrahigh molecular weight polyethylene with high crosslink density and oxidation resistance for total joint replacement,” Materials Science and Engineering: C 124, pp. 112040-112040.
(25) Vidya, V., Anoop, C. A., Jinan, S., Anwar, R. and Senthil Saravanan, M. S. (2020), “Tribological analysis of cross linked UHMWPE used in artificial knee replacement,” Materials Today: Proceedings 27, pp. 2748-2751.
(26) Mihalko, W. M., Haider, H., Kurtz, S., Marcolongo, M. and Urish, K. (2020), “New materials for hip and knee joint replacement: What's hip and what's in kneed?,” J Orthop Res 38, 7, pp. 1436-1444.
(27) Wang, F.-Y., Ren, Y., Lan, R.-T., Fu, W.-Q., Chen, Z.-J., Huang, S., Gul, R. M., Wang, J., Xu, J.-Z. and Li, Z.-M. (2021), “Controlled bacteriostasis of tea polyphenol loaded ultrahigh molecular weight polyethylene with high crosslink density and oxidation resistance for total joint replacement,” Materials Science and Engineering: C 124.
(28) Gul, R. M., Fung, K., Doshi, B. N., Oral, E. and Muratoglu, O. K. (2017), “Surface cross-linked UHMWPE using peroxides,” J Orthop Res 35, 11, pp. 2551-2556.
(29) Muratoglu, O. K., Bragdon, C. R., O'Connor, D. O., Jasty, M., Harris, W. H., Gul, R. and McGarry, F. (1999), “Unified wear model for highly crosslinked ultra-high molecular weight polyethylenes (UHMWPE),” Biomaterials 20, 16, pp. 1463-1470.
(30) Sambasivan, S., Fischer, D. A. and Hsu, S. M. (2007), “Effect of cross-linking ultrahigh molecular weight polyethylene: Surface molecular orientation and wear characteristics,” Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 25, 4, pp. 932-937.
(31) Kirschweng, B., Vörös, B., Arroussi, M., Tátraaljai, D., Zsuga, M. and Pukánszky, B. (2020), “Melt stabilization of polyethylene with natural antioxidants: comparison of a natural extract and its main component,” Journal of Thermal Analysis and Calorimetry.
(32) Francenia Santos-Sánchez, N., Salas-Coronado, R., Villanueva-Cañongo, C. and Hernández-Carlos, B. (2019), “Antioxidant Compounds and Their Antioxidant Mechanism,” Editon Edition.
(33) Bracco, P. and Oral, E. (2011), “Vitamin E-stabilized UHMWPE for total joint implants: a review,” Clin Orthop Relat Res 469, 8, pp. 2286-2293.
(34) Lerf, R., Zurbrugg, D. and Delfosse, D. (2010), “Use of vitamin E to protect cross-linked UHMWPE from oxidation,” Biomaterials 31, 13, pp. 3643-3648.
(35) Xu, J. Z., Muratoglu, O. K. and Oral, E. (2019), “Improved oxidation and wear resistance of ultrahigh molecular weight polyethylene using cross-linked powder reinforcement,” J Biomed Mater Res B Appl Biomater 107, 3, pp. 716-723.
(36) Cheung, A., Yan, C. H., Fu, H., Cheung, M. H., Chan, P. K. and Chiu, K. Y. (2019), “Ten- to Sixteen-Year Follow-Up of Highly Cross-Linked Polyethylene in Total Hip Arthroplasty: What Factors Affect Wear?,” J Arthroplasty 34, 9, pp. 2016-2021.
(37) Singh, G., Klassen, R., Howard, J., Naudie, D., Teeter, M. and Lanting, B. (2018), “Manufacturing, oxidation, mechanical properties and clinical performance of highly cross-linked polyethylene in total hip arthroplasty,” Hip Int 28, 6, pp. 573-583.
(38) Shah, N. A., Lan, R. T., Dai, R., Jiang, K., Shen, H. Y., Hong, R., Xu, J. Z., Li, L. and Li, Z. M. (2022), “Improved oxidation stability and crosslink density of chemically crosslinked ultrahigh molecular weight polyethylene using the antioxidant synergy for artificial joints,” Journal of Biomedical Materials Research Part B: Applied Biomaterials 111, 1, pp. 26-37.
(39) Arkema (2013), “Luperox dialkyl peroxides. Organic peroxides,” Editon Edition, Arkema, Inc, Philadelphia.
(40) Tomoyuki, N. (2006), “Organic Peroxides as Crosslinking Agents,” Gomu Kyokaishi(Journal of the Society of Rubber Industry, Japan), 79.6, pp. 298-303.
(41) Kayandan, S., Doshi, B. N., Oral, E. and Muratoglu, O. K. (2018), “Surface cross-linked ultra high molecular weight polyethylene by emulsified diffusion of dicumyl peroxide,” J Biomed Mater Res B Appl Biomater 106, 4, pp. 1517-1523.
(42) Lan, R.-T., Ren, Y., Wei, X., Tang, L.-Z., Shah, N. A., Xu, L., Huang, S.-S., Gul, R. M., Xu, J.-Z. and Li, Z.-M. (2021), “Synergy between vitamin E and D-sorbitol in enhancing oxidation stability of highly crosslinked ultrahigh molecular weight polyethylene,” Acta Biomaterialia 134, pp. 302-312.
(43) Chen, W., Bichara, D. A., Suhardi, J., Sheng, P. and Muratoglu, O. K. (2017), “Effects of vitamin E-diffused highly cross-linked UHMWPE particles on inflammation, apoptosis and immune response against S. aureus,” Biomaterials 143, pp. 46-56.
(44) Niki, E. (2014), “Role of vitamin E as a lipid-soluble peroxyl radical scavenger: in vitro and in vivo evidence,” Free Radic Biol Med 66, pp. 3-12.
(45) Shen, J., Gao, G., Liu, X. and Fu, J. (2015), “Natural polyphenols enhance stability of crosslinked UHMWPE for joint implants,” Clin Orthop Relat Res 473, 3, pp. 760-766.
(46) Shen, J., Liu, X. and Fu, J. (2014), “Effect of squalene absorption on oxidative stability of highly crosslinked UHMWPE stabilized with natural polyphenols,” Polymer Degradation and Stability 110, pp. 113-120.
(47) George, A., Ngo, H. D. and Bellare, A. (2014), “Influence of crystallization conditions on the tensile properties of radiation crosslinked, vitamin E stabilized UHMWPE,” J Mech Behav Biomed Mater 40, pp. 406-412.
(48) Banche, G., Allizond, V., Bracco, P., Bistolfi, A., Boffano, M., Cimino, A., Brach del Prever, E. M. and Cuffini, A. M. (2014), “Interplay between surface properties of standard, vitamin E blended and oxidised ultra high molecular weight polyethylene used in total joint replacement and adhesion of Staphylococcus aureus and Escherichia coli,” Bone Joint J 96-B, 4, pp. 497-501.
(49) Pruitt, L. A., Ansari, F., Kury, M., Mehdizah, A., Patten, E. W., Huddlestein, J., Mickelson, D., Chang, J., Hubert, K. and Ries, M. D. (2013), “Clinical trade-offs in cross-linked ultrahigh-molecular-weight polyethylene used in total joint arthroplasty,” J Biomed Mater Res B Appl Biomater 101, 3, pp. 476-484.
(50) Kang, X., Zong, X., Zhang, P., Zeng, X., Liu, Y., Yao, C., Wang, T., Feng, P. and Yang, C. (2021), “Effects of epigallocatechin gallate incorporation in UHMWPE on biological behavior, oxidative degradation, mechanical and tribological performance for biomedical applications,” Tribology International 158, January, pp. 106887-106887.
(51) Singh, M. K., Ilg, P., Espinosa-Marzal, R. M., Kröger, M. and Spencer, N. D. (2016), “Effect of Crosslinking on the Microtribological Behavior of Model Polymer Brushes,” Tribology Letters 63, 2, pp. 1-9.
(52) Li, A. (2013), “Structure-Property Relationships of Surface-Grafted Polymeric Architectures: From Ultra-Thin Films To Quasi-3D Polymer Assemblies,” Editon Edition.
(53) Li, A., Benetti, E. M., Tranchida, D., Clasohm, J. N., Schönherr, H. and Spencer, N. D. (2011), “Surface-grafted, covalently cross-linked hydrogel brushes with tunable interfacial and bulk properties,” Macromolecules 44, 13, pp. 5344-5351.
(54) Chen, M., Briscoe, W. H., Armes, S. P. and Klein, J. (2009), “Lubrication at physiological pressures by polyzwitterionic brushes,” Science (New York, N.Y.) 323, 5922, pp. 1698-1701.
(55) Xu, Y. Q., Gao, Y. and Granato, D. (2021), “Effects of epigallocatechin gallate, epigallocatechin and epicatechin gallate on the chemical and cell-based antioxidant activity, sensory properties, and cytotoxicity of a catechin-free model beverage,” Food Chem 339, pp. 128060.
(56) Liu, T., Esposito, C. I., Burket, J. C. and Wright, T. M. (2017), “Crosslink Density Is Reduced and Oxidation Is Increased in Retrieved Highly Crosslinked Polyethylene TKA Tibial Inserts,” Clinical orthopaedics and related research 475, 1, pp. 128-136.
(57) Gürgen, S., Çelik, O. N. and Kuşhan, M. C. (2019), “Tribological behavior of UHMWPE matrix composites reinforced with PTFE particles and aramid fibers,” Composites Part B: Engineering 173, pp. 106949-106949.