H. Laufman, “What’s wrong with our operating rooms?,” Am. J. Surg., vol. 122, no. 3, pp. 332–343, Sep. 1971.
M. Essex-Lopresti, “Operating theatre design,” The Lancet, vol. 353, no. 9157, pp. 1007–1010, Mar. 1999.
B. Rostenberg and P. R. Barach, “Design of cardiovascular operating rooms for tomorrow’s technology and clinical practice—Part 2,” Prog. Pediatr. Cardiol., vol. 33, no. 1, pp. 57–65, Jan. 2012.
B. G. Sobolev, V. Sanchez, and C. Vasilakis, “Systematic Review of the Use of Computer Simulation Modeling of Patient Flow in Surgical Care,” J. Med. Syst., vol. 35, no. 1, pp. 1–16, Feb. 2011.
R. A. Marjamaa, P.M. Torkki, E. J. Hirvensalo, and O. A. Kirvelä, “What is the best workflow for an operating room? A simulation study of five scenarios,” Health Care Manag. Sci., vol. 12, no. 2, p. 142, Jun. 2009.
D.C. Krupka and W. S. Sandberg, “Operating room design and its impact on operating room economics,” Curr. Opin. Anesthesiol., vol. 19, no. 2, p. 185, Apr. 2006.
Q.-L. Lin, H.-C. Liu, D.-J. Wang, and L. Liu, “Integrating systematic layout planning with fuzzy constraint theory to design and optimize the facility layout for operating theatre in hospitals,” J. Intell. Manuf., vol. 26, no. 1, pp. 87–95, Feb. 2015.
T. Gormley et al., “Methodology for analyzing environmental quality indicators in a dynamic operating room environment,” Am. J. Infect. Control, vol. 45, no. 4, pp. 354–359, Apr. 2017.
G. Brogmus, W. Leone, L. Butler, and E. Hernandez, “Best Practices in OR Suite Layout and Equipment Choices to Reduce Slips, Trips, and Falls,” AORN J., vol. 86, no. 3, pp. 384–398, Sep. 2007.
G. Nollert and S. Wich, “Planning a cardiovascular hybrid operating room: the technical point of view,” Heart Surg. Forum, vol. 12, no. 3, pp. E125–130, Jun. 2009.
W. K. Winer and T. L. Lyons, “Suggested set-up and layout of instruments and equipment for advanced operative laparoscopy,” J. Am. Assoc. Gynecol. Laparosc., vol. 2, no. 2, pp. 231–234, Feb. 1995.
T. Korkiakangas, S.-M. Weldon, J. Bezemer, and R. Kneebone, “Nurse–surgeon object transfer: Video analysis of communication and situation awareness in the operating theatre,” Int. J. Nurs. Stud., vol. 51, no. 9, pp. 1195–1206, Sep. 2014.
L. Shan, B. Shan, D. Graham, and A. Saxena, “Total hip replacement: a systematic review and meta-analysis on mid-term quality of life,” Osteoarthritis Cartilage, vol. 22, no. 3, pp. 389–406, Mar. 2014.
S. M. Kurtz et al., “International survey of primary and revision total knee replacement,” Int. Orthop., vol. 35, no. 12, pp. 1783–1789, Dec. 2011.
R. O. Darouiche, “Treatment of Infections Associated with Surgical Implants,” N. Engl. J. Med., vol. 350, no. 14, pp. 1422–1429, Apr. 2004.
G. de Lissovoy, K. Fraeman, V. Hutchins, D. Murphy, D. Song, and B. B. Vaughn, “Surgical site infection: Incidence and impact on hospital utilization and treatment costs,” Am. J. Infect. Control, vol. 37, no. 5, pp. 387–397, Jun. 2009.
O. Karhu, P. Kansi, and I. Kuorinka, “Correcting working postures in industry: A practical method for analysis,” Appl. Ergon., vol. 8, no. 4, pp. 199–201, Dec. 1977.
I. J. Kant, L. C. de Jong, M. van Rijssen-Moll, and P. J. Borm, “A survey of static and dynamic work postures of operating room staff,” Int. Arch. Occup. Environ. Health, vol. 63, no. 6, pp. 423–428, 1992.
K. Radermacher, C. V. Pichler, and G. Rau, “Aspects of ergonomics in Minimal-Invasive Surgery—Analysis and approaches,” in 1992 14th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 1992, vol. 4, pp. 1564–1565.
R. Berguer, G. T. Rab, H. Abu-Ghaida, A. Alarcon, and J. Chung, “A comparison of surgeons’ posture during laparoscopic and open surgical procedures,” Surg. Endosc., vol. 11, no. 2, pp. 139–142, Feb. 1997.
J. A. ENGELS, J. A. LANDEWEERD, and Y. KANT, “An OWAS-based analysis of nurses’ working postures,” Ergonomics, vol. 37, no. 5, pp. 909–919, May 1994.
J. D. Lester, S. Hsu, and C. S. Ahmad, “Occupational hazards facing orthopedic surgeons,” Am. J. Orthop. Belle Mead NJ, vol. 41, no. 3, pp. 132–139, Mar. 2012.
S. M. Alqahtani, M. M. Alzahrani, and M. Tanzer, “Adult Reconstructive Surgery: A High-Risk Profession for Work-Related Injuries,” J. Arthroplasty, vol. 31, no. 6, pp. 1194–1198, Jun. 2016.
J. Neumann, C. Angrick, A. Roth, and T. Neumuth, “Ergonomic Assessment of Operating Room Setups for Orthopedic Reconstructive Surgery,” presented at the 18. Jahrestagung der Deutschen Gesellschaft für Computer und Roboter-assistierte Chirurgie (CURAC), Reutlingen, 2019.
W. Lauer, B. Ibach, and K. Radermacher, “Knowledge-based OR table positioning assistant for orthopedic surgery,” in 4th European Conference of the International Federation for Medical and Biological Engineering, Springer, Berlin, Heidelberg, 2009, pp. 1676–1678.
A. Baumgart, A. Zoeller, C. Denz, H. j Bender, A. Heinzl, and E. Badreddin, “Using Computer Simulation in Operating Room Management: Impacts on Process Engineering and Performance,” in 40th Annual Hawaii International Conference on System Sciences, 2007. HICSS 2007, 2007, pp. 131–131.
P. Völkner and B. Werners, “A simulation-based decision support system for business process planning,” Fuzzy Sets Syst., vol. 125, no. 3, pp. 275–287, Feb. 2002.
F. Fernández-Gutiérrez, G. Houston, O. J. Elle, M. Wolska-Krawczyk, M. Orban, and A. Melzer, “Workflow Analysis, Design, Modeling and Simulation for the Multimodality Imaging Therapy Operating System (MITOS),” in Intraoperative Imaging and Image-Guided Therapy, Springer, New York, NY, 2014, pp. 325–338.
C. G. Cassandras and S. Lafortune, Introduction to Discrete Event Systems, 2nd ed. Springer US, 2008.
B. G. Sobolev, V. Sanchez, and C. Vasilakis, “Systematic review of the use of computer simulation modeling of patient flow in surgical care,” J. Med. Syst., vol. 35, no. 1, pp. 1–16, Feb. 2011.
J. Van Ooteghem, S. Verbrugge, K. Casier, and G. Casier, “Application of a Discrete Event Simulator for Healthcare Processes:,” 2015, pp. 241–246.
A. Inès, Z. Hayfa, and H. Slim, “Workflow tool to Model and simulate patients paths in Pediatric Emergency Department,” p. 7, 2013.
A. Goienetxea Uriarte, E. Ruiz Zúñiga, M. Urenda Moris, A. H. C. Ng, C. Karlberg, and P. Wallqvist, “Improved system design of an emergency department through simulation-based multiobjective-optimization,” presented at the 6th edition of the modeFRONTIER International Users’ Meeting Conference. Trieste, Italy, May 12–13, 2014, 2014.
K. Steins, “Discrete-Event Simulation for Hospital Resource Planning : Possibilities and Requirements,” DIVA, 2010.
S. Azari-Rad, A. Yontef, D. M. Aleman, and D. R. Urbach, “A simulation model for perioperative process improvement,” Oper. Res. Health Care, vol. 3, no. 1, pp. 22–30, Mar. 2014.
S. M. Ballard and M. E. Kuhl, “The use of Simulation to Determine Maximum Capacity in the Surgical Suite Operating Room,” in Proceedings of the 2006 Winter Simulation Conference, 2006, pp. 433–438.
F. Fernández-Gutiérrez, I. Barnett, B. Taylor, G. Houston, and A. Melzer, “Framework for detailed workflow analysis and modelling for simulation of multi-modal image-guided interventions,” J. Enterp. Inf. Manag., vol. 26, no. 1/2, pp. 75–90, 2013.
F. Fernández-Gutiérrez, M. Wolska-Krawczyk, A. Buecker, J. G. Houston, and A. Melzer, “Workflow optimisation for multimodal imaging procedures: a case of combined X-ray and MRI-guided TACE,” Minim. Invasive Ther. Allied Technol., vol. 26, no. 1, pp. 31–38, 2017.
“DELMIA - Dassault Systèmes,” 13-Jun–2018. [Online]. Available: https://www.3ds.com/products-services/delmia/. [Accessed: 13-Jun–2018].
D. Zajonz et al., “Steigerung der Effizienz durch Optimierung der Tischstellung bei elektiven primären THA und TKA: eine prospektive monozentrische Pilotstudie,” unpublished, 2019.
J. Neumann, C. Angrick, D. Rollenhagen, A. Roth, and T. Neumuth, “Perioperative Workflow Simulation and Optimization in Orthopedic Surgery,” in MICCAI 2018, OR 2.0 Context-Aware Operating Theaters, Granada, Spain, 2018, vol. Lecture Notes in Computer Science, pp. 3–11.
R. M. Waeschle et al., “Mythos OP-Minute,” Anaesthesist, vol. 65, no. 2, pp. 137–147, Feb. 2016.