ABAL. Alumínio: Processos de Produção. Reciclagem. 2018. Available in: http://abal.org.br/aluminio/processos-de-producao/reciclagem. Accessed in: 04/09/2019.
ABAL, A. B. D. A. Reciclagem no Brasil. 2017. Available in: http://abal.org.br/sustentabilidade/reciclagem/reciclagem-no-brasil. Accessed in: 03/02/2018.
ABDEL-SHAFY, H. I.; MANSOUR, M. S. Solid waste issue: Sources, composition, disposal, recycling, and valorization. Egyptian journal of petroleum, 27, n. 4, p. 1275-1290, 2018. https://doi.org/10.1016/j.ejpe.2018.07.003.
ACHYUTH, K.; PATEL, M.; SANGRAL, S.; JAYAPRAKASH, M. Fretting wear degradation behavior of Al-Si-Ni based cast Aluminum alloy under different environment. Materials Today: Proceedings, 15, p. 103-108, 2019. https://doi.org/10.1016/j.matpr.2019.05.031.
ASHTARI, P.; TETLEY-GERARD, K.; SADAYAPPAN, K. Removal of iron from recycled aluminium alloys. Canadian Metallurgical Quarterly, 51, n. 1, p. 75-80, 2012. https://doi.org/10.1179/1879139511Y.0000000026.
ASSOCIATION, A. Aluminum: properties and physical metallurgy. ASM international, 1984. BOOK. ISBN: 1615031693.
BASAK, C. B.; HARI BABU, N. Morphological changes and segregation of β-Al9Fe2Si2 phase: A perspective from better recyclability of cast Al-Si alloys. Materials & Design, 108, p. 277-288, 2016. https://doi.org/10.1016/j.matdes.2016.06.096.
BDEIR, L. M. H.; ALSAFFAR, K. A. Recycling of aluminum beverage cans. Journal of Engineering and Sustainable Development, 12, n. 3, p. 157-163, 2008. Available in: https://www.iasj.net/iasj?func=fulltext&aId=10274. Accessed in: 05/12/2019.
DAGWA, I. M.; ADAMA, K. K. Property evaluation of pumice particulate-reinforcement in recycled beverage cans for Al-MMCs manufacture. Journal of King Saud University - Engineering Sciences, 30, n. 1, p. 61-67, 2018. https://doi.org/10.1016/j.jksues.2015.12.006.
DAVIS, J. R. Alloying: Understanding the Basics. ASM International, 2001. BOOK. ISBN: 978-0- 87170-744-4.
DING, N.; GAO, F.; WANG, Z.; GONG, X. et al. Environment impact analysis of primary aluminum and recycled aluminum. Procedia Engineering, 27, p. 465-474, 2012. https://doi.org/10.1016/j.proeng.2011.12.475.
FIGUEIREDO, F. F. A contribuição da reciclagem de latas de alumínio para o meio ambiente brasileiro. Revista Aracne, n. 127, 2009. Available in: http://www.ub.edu/geocrit/aracne/aracne-127.htm. Accessed in: 05/12/2019.
GHISELLINI, P.; ULGIATI, S. Circular economy transition in Italy. Achievements, perspectives and constraints. Journal of Cleaner Production, 243, p. 118360, 2020. https://doi.org/10.1016/j.jclepro.2019.118360.
GRIMAUD, G.; PERRY, N.; LARATTE, B. Aluminium cables recycling process: Environmental impacts identification and reduction. Resources, Conservation and Recycling, 135, p. 150-162, 2018. https://doi.org/10.1016/j.resconrec.2017.11.010.
GRONOSTAJSKI, J.; MARCINIAK, H.; MATUSZAK, A. New methods of aluminium and aluminium-alloy chips recycling. Journal of materials processing technology, 106, n. 1-3, p. 34-39, 2000. https://doi.org/10.1016/S0924-0136(00)00634-8.
HUTCHESON, W.; HOAGLAND, P.; JIN, D. Valuing environmental education as a cultural ecosystem service at Hudson River Park. Ecosystem Services, 31, p. 387-394, 2018. https://doi.org/10.1016/j.ecoser.2018.03.005.
HUYNH, L. A. T.; PHAM, C. H.; RASMUSSEN, K. J. R. Mechanical properties and residual stresses in cold-rolled aluminium channel sections. Engineering Structures, 199, p. 109562, 2019. https://doi.org/10.1016/j.engstruct.2019.109562.
JERINA, L.; MEDVED, J.; GODEC, M.; VONČINA, M. Influence of the specific surface area of secondary material on the solidification process and microstructure of aluminium alloy AA7075. Journal of Thermal Analysis and Calorimetry, 134, n. 1, p. 455-462, October 01 2018. journal article. https://doi.org/10.1016/S1003-6326(09)60417-9.
KUCHARIKOVÁ, L.; TILLOVÁ, E.; CHALUPOVÁ, M.; MAZUR, M. et al. Analysis of microstructure in AlSi7Mg0.3 cast alloy with different content of Fe. Transportation Research Procedia, 40, p. 59-67, 2019/01/01/ 2019. https://doi.org/10.1016/j.trpro.2019.07.011.
KUMAR, A.; KUMAR, S.; MUKHOPADHYAY, N. K. Introduction to magnesium alloy processing technology and development of low-cost stir casting process for magnesium alloy and its composites. Journal of Magnesium and Alloys, 6, n. 3, p. 245-254, 2018/09/01/ 2018. https://doi.org/10.1016/j.jma.2018.05.006.
MANDATSY MOUNGOMO, J. B.; NGANGA KOUYA, D.; SONGMENE, V. Aluminium Machining Chips Formation, Treatment & Recycling: A Review. Key Engineering Materials, 710, p. 71-76, 2016. https://doi.org/10.4028/www.scientific.net/KEM.710.71.
MANSUROV, Y.; LETYAGIN, N.; FINOGEYEV, A.; RAKHMONOV, J. Influence of impurity elements on the casting properties of Al-Mg based alloys. Non-Ferrous Metals, 44, n. 1, p. 24-29, 2018. DOI:10.17580/nfm.2018.01.05. http://www.rudmet.ru/journal/1729/article/29647/?language=en. Accessed in: 05/12/2019.
PHAN HOANG, T. T.; KATO, T. Measuring the effect of environmental education for sustainable development at elementary schools: A case study in Da Nang city, Vietnam. Sustainable Environment Research, 26, n. 6, p. 274-286, 2016. https://doi.org/10.1016/j.serj.2016.08.005.
ROSA, F. R.; MATIAS, J. D. S.; JUNHO, B. D. O., 2016, Pouso Alegre - Minas Gerais. A importância da logística reversa no campo industrial: Aplicação no reprecessamento do alumínio. Brasil. p. 124 - 137. Available in: http://www.univas.edu.br/docs/biblioteca/Ebook_IIIeIVCongressoCientificoProducao_2014e2015.pdf#page=124. Acesso em: 14/10/2019. Accessed in: 01/12/2019.
SCHLESINGER, M. E. Aluminum recycling. CRC press, 2013. BOOK ISBN: 1466570253.
SHACKELFORD, J. F. Introduction to materials science for engineers. 6ª ed. Pearson Prentice Hall, 2008. BOOK. ISBN: 9788576051602.
SHAMSUDIN, S.; LAJIS, M. A.; ZHONG, Z. W. Evolutionary in Solid State Recycling Techniques of Aluminium: A review. Procedia CIRP, 40, p. 256-261, 2016. https://doi.org/10.1016/j.procir.2016.01.117.
VERRAN, G.; KURZAWA, U.; PESCADOR, W. Reciclagem de latas de alumínio visando melhor rendimento e qualidade metalúrgica no alumínio obtido. Revista Matéria, 10, n. 1, p. 334-343, 2005. Available in: http://www.materia.coppe.ufrj.br/sarra/artigos/artigo10635. Accessed in: 02/12/2019.
VERRAN, G. O.; KURZAWA, U. An experimental study of aluminum can recycling using fusion in induction furnace. Resources, Conservation and Recycling, 52, n. 5, p. 731-736, 2008. https://doi.org/10.1016/j.resconrec.2007.10.001.
VERRAN, G. O.; KURZAWA, U.; PESCADOR, W. A., 2004, Santa Catarina. Reciclagem de latas de alumínio visando a obtenção de matérias primas com qualidade para aplicação em processos metalúrgicos de fabricação. 2004. Available in: https://slidex.tips/download/ictr-2004-congresso-brasileiro-de-ciencia-e-tecnologia-em-residuos-e-desenvolvim-39. Accessed in: 03/12/2019.
ZHANG, L.; GAO, J.; DAMOAH, L. N. W.; ROBERTSON, D. G. Removal of iron from aluminum: a review. Mineral Processing and Extractive Metallurgy Review, 33, n. 2, p. 99-157, 2012. https://doi.org/10.1080/08827508.2010.542211.
ZÁVODSKÁ, D.; TILLOVÁ, E.; ŠVECOVÁ, I.; KUCHARIKOVÁ, L. et al. Secondary cast Al-alloys with higher content of iron. Materials Today: Proceedings, 5, n. 13, Part 2, p. 26680-26686, 2018. https://doi.org/10.1016/j.matpr.2018.08.135.
ŠKŮRKOVÁ, K. L.; INGALDI, M. Recycling Process of the Aluminium Cans as an Example of the Renewable Material Sources. Advanced Materials Research, 1001, p. 103-108, 2014. https://doi.org/10.4028/www.scientific.net/AMR.1001.103.