Abbaspour, K.C. (2015). SWAT-CUP: SWAT calibration and uncertainty programs user manual. Eawag; Swiss Federal institute of Aquatic Science and Technology, Dübendorf, Switzerland.
Abbaspour, K. C., Yang, J., Maximov, I., Siber, R., Bogner, K., Mieleitner, J., ... & Srinivasan, R. (2007). Modelling hydrology and water quality in the pre-alpine/alpine Thur watershed using SWAT. Journal of hydrology, 333(2-4), 413-430.
Ackers, P., & White, W. (1993). Sediment transport in open channels: Ackers and White update. Technical note. Proceedings of the Institution of Civil Engineers-Water Maritime and Energy, 101(4), 247-249.
Argent, R. M., Voinov, A., Maxwell, T., Cuddy, S. M., Rahman, J. M., Seaton, S., ... & Braddock, R. D. (2006). Comparing modelling frameworks–a workshop approach. Environmental Modelling & Software, 21(7), 895-910.
Arnold, J. G., Kiniry, J. R., Srinivasan, R., Williams, J. R., Haney, E. B., & Neitsch, S. L. (2011). Soil and Water Assessment Tool input/output file documentation: Version 2009. Texas Water Resources Institute Technical Report, 365.
Arnold, J. G., Moriasi, D. N., Gassman, P. W., Abbaspour, K. C., White, M. J., Srinivasan, R., ... & Kannan, N. (2012). SWAT: Model use, calibration, and validation. Transactions of the ASABE, 55(4), 1491-1508.
Asselman, N. E. M. (2000). Fitting and interpretation of sediment rating curves. Journal of Hydrology, 234(3-4), 228-248.
Balascio, C. C., Palmeri, D. J., & Gao, H. (1998). Use of a genetic algorithm and multi-objective programming for calibration of a hydrologic model. Transactions of the ASAE, 41(3), 615.
Bedient, P.B. and Huber, W.C., 2002. Hydrology and Floodplain Analysis, 3rd Ed. Prentice-Hall Publishing Co., Upper Saddle River, 763 pp
Bedient, P.B., and Huber, W.C. (1988). Hydrology and floodplain analysis, Addison Wesley. Reading, Mass.
Brunner, G. W. (2016). HEC-RAS river analysis system 2D modeling user’s manual. US Army Corps of Engineers—Hydrologic Engineering Center, 1-171.
Bulti, A.T. (2021). The Influence of Dam Construction on the Catchment Hydrologic Behavior and its Effects on a Discharge Forecast in Hydrological Models. Water Resource Management, https://doi.org/10.1007/s11269-021-02829-z
Cao, W., Bowden, W. B., Davie, T., & Fenemor, A. (2006). Multi‐variable and multi‐site calibration and validation of SWAT in a large mountainous catchment with high spatial variability. Hydrological Processes: An International Journal, 20(5), 1057-1073.
De Vries, A., & Klavers, H. C. (1994). Riverine fluxes of pollutants: monitoring strategy first, calculation methods second. European Water Management, 4(2), 12-17.
Duan, N. (1983). Smearing estimate: a nonparametric retransformation method. Journal of the American Statistical Association, 78(383), 605-610.
Engelund, F., & Hansen, E. (1967). A monograph on sediment transport. Technisk Forlag, Copenhagen, Denmark.
Ferguson, R. I. (1986). River loads underestimated by rating curves. Water resources research, 22(1), 74-76.
Fread, D. L. (1981). Flood routing: a synopsis of past, present, and future capability. VP Singh, 521-542.
French, R. (1985). Open-channel hydraulics. New York: McGraw-Hill.
Gassman, P. W., Reyes, M. R., Green, C. H., & Arnold, J. G. (2007). The soil and water assessment tool: historical development, applications, and future research directions. Transactions of the ASABE, 50(4), 1211-1250
Holtschlag, D. J. (2001). Optimal estimation of suspended‐sediment concentrations in streams. Hydrological processes, 15(7), 1133-1155.
Jones, K. R., Berney, O., Carr, D. P., & Barrett, E. C. (1981). Arid zone hydrology for agricultural development.
Keshta, N., Elshorbagy, A., & Carey, S. (2009). A generic system dynamics model for simulating and evaluating the hydrological performance of reconstructed watersheds. Hydrology and Earth System Sciences, 13(6), 865-881.
Laursen, E. M. (1963). An analysis of relief bridge scour. Journal of the Hydraulics Division, 89(3), 93-118.
Linsley, R. K., & Kohler, M. A. Paulhus, JLH. 1982. Hydrology for Engineers.
Maidment, D. R. (1993). Handbook of hydrology (Vol. 9780070, p. 397323). New York: McGraw-Hill.
Maidment, D. R., & Djokic, D. (Eds.). (2000). Hydrologic and hydraulic modeling support: with geographic information systems. ESRI, Inc.
Mejia, A. I., & Reed, S. M. (2011). Evaluating the effects of parameterized cross section shapes and simplified routing with a coupled distributed hydrologic and hydraulic model. Journal of Hydrology, 409(1-2), 512-524.
Meyer-Peter, E., & Muller, R. (1984). Formulas for bed load transport. Proceedings of 2nd meeting of the International Association for Hydraulic Structures Research, Delft, (pp. 39-64).
Moriasi, D. N., Arnold, J. G., Van Liew, M. W., Bingner, R. L., Harmel, R. D., & Veith, T. L. (2007). Model evaluation guidelines for systematic quantification of accuracy in watershed simulations. Transactions of the ASABE, 50(3), 885-900.
Neitsch, S. L., Arnold, J. G., Kiniry, J. R., & Williams, J. R. (2011). Soil and water assessment tool theoretical documentation version 2009. Texas Water Resources Institute.
Olivera F, Maidment DR (2000) GIS tools for HMS modeling support. In: Maidment DR, Djokic D (eds) Hydrologic and hydraulic modeling support with geographic information systems. Environmental Systems Research Institute Press, USA, pp 85–112
Phillips, J. M., Webb, B. W., Walling, D. E., & Leeks, G. J. L. (1999). Estimating the suspended sediment loads of rivers in the LOIS study area using infrequent samples. Hydrological processes, 13(7), 1035-1050.
Phillips, J. V., & Tadayon, S. (2006). Selection of Manning's roughness coefficient for natural and constructed vegetated and non-vegetated channels, and vegetation maintenance plan guidelines for vegetated channels in Central Arizona. Washington, DC: US Department of the Interior, US Geological Survey.
Reed, S. M., & Maidment, D. R. (1995). A GIS procedure for merging NEXRAD precipitation data and digital elevation models to determine rainfall-runoff modeling parameters. Center for Research in Water Resources Report 95-3, University of Texas at Austin.
Santhi, C., Arnold, J. G., Williams, J. R., Dugas, W. A., Srinivasan, R., & Hauck, L. M. (2001). Validation of the swat model on a large rwer basin with point and nonpoint sources 1. JAWRA Journal of the American Water Resources Association, 37(5), 1169-1188.
Schuol, J., & Abbaspour, K. C. (2006). Calibration and uncertainty issues of a hydrological model (SWAT) applied to West Africa. Advances in geosciences, 9, 137-143.
Shrestha, N. K., Leta, O. T., De Fraine, B., Van Griensven, A., & Bauwens, W. (2013). OpenMI-based integrated sediment transport modelling of the river Zenne, Belgium. Environmental Modelling & Software, 47, 193-206.
Toffaleti, F. B. (1968). A Procedure for Computation of the Total River Sand Discharge and Detailed Distribution, Bed to Surface (No. TR-5). Committee on channel stabilization (army).
U.S. Army Corps of Engineers (USACE, 2001): The Columbia River system inside story. Tech. Rep., 80 pp. [Available online at https://www. bpa. gov/power/pg/columbia_river_inside_story. pdf.].
U.S. Army Corps of Engineers (USACE) (1990). Hydraulics design of spillways. Engineering Manual EM 1110-2-1603, Washington, DC.
Van Liew, M. W., Arnold, J. G., & Bosch, D. D. (2005). Problems and potential of autocalibrating a hydrologic model. Transactions of the ASAE, 48(3), 1025-1040.
Walling, D. E. (1988). The reliability of rating curve estimates of suspended sediment yield: some further comments. In Symposium on Sediment Budgets, Porto Alegre, Brazil, 1988.
Wilcock, P. R., & Crowe, J. C. (2003). Surface-based transport model for mixed-size sediment. Journal of Hydraulic Engineering, 129(2), 120-128.
Williams, J. R., Arnold, J. G., Kiniry, J. R., Gassman, P. W., & Green, C. H. (2008). History of model development at Temple, Texas. Hydrological sciences journal, 53(5), 948-960.
Williams, J. R., & Singh, V. P. (1995). Computer models of watershed hydrology. chap. The EPIC Model, Water Resources Publications, Highlands Ranch, CO, 909-1000.
WILSON EM (1990) Engineering Hydrology. MacMillan, Hong Kong, China.
Yang, C. T. (1984). Unit stream power equation for gravel. Journal of Hydraulic Engineering, 110(12), 1783-1797.