[1] Padture NP, Gell M, Jordan EH. Thermal barrier coatings for gas-turbine engine applications. Science 2002, 96: 280-284.
[2] Fleck NA, Cocks ACF, Lampenscherf S. Thermal shock resistance of air plasma sprayed thermal barrier coatings. J Eur Ceram Soc 2014, 34: 2687-2694.
[3] Zhou X, Chen T, Yuan JY, et al. Failure of plasma sprayed nano-zirconia-based thermal barrier coatings exposed to molten CaO–MgO–Al2O3–SiO2 deposits. J Am Ceram Soc 2019, 102: 6357-6371.
[4] Cai J, Lv P, Guan QF, et al. Thermal cycling behavior of thermal barrier coatings with MCrAlY bond coat irradiated by high-current pulsed electron beam. ACS Appl Mater Interfaces 2016, 8: 32541-32556.
[5] Stöver D, Pracht G, Lehmann H, et al. New Material Concepts for the Next Generation of Plasma-Sprayed Thermal Barrier Coatings. J Therm Spray Technol 2004, 13: 76-83.
[6] Cao XQ, Zhang YF, Zhang JF, et al. Failure of the plasma-sprayed coating of lanthanum hexaluminate. J Eur Ceram Soc 2008, 28: 1979-1986.
[7] Clarke DR, Levi CG. Materials design for the next generation thermal barrier coatings. Annu Rev Mater Res 2003, 33: 383-417.
[8] Wei XD, Hou GL, Zhao D, et al. Recent Research Progress on Oxide Doped YSZ Thermal Barrier Coatings. SurfTechnol. 2020, 49: 92-103
[9] Tarasi F, Medraj M, Dolatabadi A, et al. High-temperature performance of alumina-zirconia composite coatings containing amorphous phases. Adv Funct Mater 2011, 21: 4143-4151.
[10] Song XM, Liu ZW, Kong MG, et al. Effect of Microstructure on the Thermal Conductivity of Plasma-Sprayed Al2O3-YSZ Coatings. J Therm Spray Technol 2016, 25: 770-777.
[11] Yu Q, Zhou C, Zhang HY, et al. Thermal stability of nanostructured 13 wt% Al2O3-8 wt% Y2O3-ZrO2 thermal barrier coatings. J Eur Ceram Soc 2010, 30: 889-897.
[12] Yin BB, Zhang F, Zhu W, et al. Effect of Al2O3 modification on the properties of YSZ: Corrosion resistant, wetting and thermal-mechanical properties. Surf Coatings Technol 2019, 357: 161-171.
[13] Song XM, Zhang JM, Liu ZW, et al. Thermal shock resistance of YSZ, YSZ-Al2O3 and YSZ-Al2O3/YSZ coatings. Vacuum 2019, 162: 150-155.
[14] Levit M, Grimberg I, Weiss BZ. Residual stresses in ceramic plasma-sprayed thermal barrier coatings: Measurement and calculation. Mater Sci Eng A 1996, 206: 30-38.
[15] Zhang XC, Watanabe M, Kuroda S. Effects of residual stress on the mechanical properties of plasma-sprayed thermal barrier coatings. Eng Fract Mech 2013, 110: 314-27.
[16] Song XM, Zhang JM, Lin CC, et al. Microstructures and residual strain/stresses of YSZ coatings prepared by plasma spraying. Mater Lett 2019, 240: 217-220.
[17] Xu YJ, Guo XJ, Lin CC, et al. Thermal Properties and Microstructures Analysis of YSZ and YSZ-Al2O3 Thermal Barrier Coatings. J Therm Spray Technol 2020, 29: 574-581.
[18] Song XM, Xu YJ, Ding Y, et al. Study of microstructure, electronic structure and thermal properties of Al2O3-doped tetragonal YSZ coatings. Appl Surf Sci 2021, 542: 148553.
[19] Wang Y, Bai Y, Yuan T, et al. Failure analysis of fine-lamellar structured YSZ based thermal barrier coatings with submicro/nano-grains. Surf Coatings Technol 2017, 319: 95-103.
[20] Salvati E, Korsunsky AM. An analysis of macro- and micro-scale residual stresses of Type I, II and III using FIB-DIC micro-ring-core milling and crystal plasticity FE modelling. Int J Plast 2017, 98: 123-138.
[21] Lee EJ, Chen Z, Noh HJ, et al. Development of microstrain in aged lithium transition metal oxides. Nano Lett 2014, 14: 4873–4880.
[22] Wan VVC, Cuddihy MA, Jiang J, et al. An HR-EBSD and computational crystal plasticity investigation of microstructural stress distributions and fatigue hotspots in polycrystalline copper. Acta Mater 2016, 115: 45-57.
[23] Jin L, Ni L, Yu Q, et al. Thermal cyclic life and failure mechanism of nanostructured 13 wt%Al2O3 doped YSZ coating prepared by atmospheric plasma spraying. Ceram Int 2012, 38: 2983-2989.
[24] Yang J, Jiang W. Influence of welding residual stress on stress intensity factor of two-dimensional cracks. Adv Mater Res 2011, 299-300: 966-969.
[25] Zhu X, Huang YL, Zheng W, et al. Crystallinity, Stresses, and Cracks of YSZ Coatings Characterized by SEM-EBSD-Raman Spectroscopy. J Therm Spray Technol 2020, 29: 995-1001.
[26] Mao W, Yu Y. Effect of elastic reaction stress on plastic behaviors of grains in polycrystalline aggregate during tensile deformation. Mater Sci Eng A 2004, 367: 277–281.
[27] Lu M, Wang F, Zeng XG, et al. Cohesive zone modeling for crack propagation in polycrystalline NiTi alloys using molecular dynamics. Theor Appl Fract Mech 2020, 105: 102402.
[28] Schelling PK, Phillpot SR, Wolf D, et al. Mechanism of the Cubic-to-Tetragonal Phase Transition in Zirconia and Yttria-Stabilized Zirconia by Molecular-Dynamics Simulation. J Am Ceram Soc 2001, 84: 1609-1619
[29] Messerschmidt U, Baither D, Baufeld B, et al. Plastic deformation of zirconia single crystals: A review. Mater Sci Eng A 1997, 233: 61-74..