[1] Kim YH, Kim KY, Lee YD. Nitrogen-alloyed, metastable austenitic stainless steel for automotive structural applications. Mater Manuf Process 2004; 1(1): 51–59. https://doi.org/10.1081/amp-1200274981
[2] Hannu H, Tero H. On the effects of α′martensite in hydrogen embrittlement of a cathodically charged AISI type 304 austenitic stainless steel. Corrosion 1980; 36(1): 47–51. https://doi.org/10.5006/0010-9312-36.1.47
[3] Papula S, Saukkonen T, Talonen J, et al. Delayed Cracking of Metastable Austenitic Stainless Steels after Deep Drawing. ISIJ Int 2015; 55(10): 2182–2188. https://doi.org/10.2355/isijinternational.isijint-2015-078
[4] Zinbi A, Bouchou A. Delayed cracking in 301 austenitic steel after bending process: Martensitic transformation and hydrogen embrittlement analysis. Eng Fail Anal 2010; 17(5): 1028–1037. https://doi.org/10.1016/j.engfailanal.2009.11.007
[5] Papula S, Talonen J, Hänninen H. Effect of residual stress and strain-induced α′-martensite on delayed cracking of metastable austenitic stainless steels. Metall Mater Trans A Phys Metall Mater Sci 2014; 45(3): 1238–1246. https://doi.org/10.1007/s11661-013-2090-3
[6] Tan CJ, Aslian A. FE simulation study of deep drawing process of SUS304 cups having no delayed cracks under enhanced blank holding force. P I Mech Eng B J Eng 2019; 234(1-2): 84-94. https://doi.org/10.1177/0954405419855230
[7] Guo X, Black W. Delayed cracking in high strength steels. In: Wolfgang B (ed) 23. Aachener Stahlkolloquium: Stahl-ein exzellenter Werkstoff, Aachen, 2008. p. 59–69.
[8] Berrahmoune MR, Berveiller S, Inal K, et al. Delayed cracking in 301LN austenitic steel after deep drawing: Martensitic transformation and residual stress analysis. Mater Sci Eng A 2006; 438-440: 262-266. https://doi.org/10.1016/j.msea.2006.02.189
[9] El Sherbiny M, Zein H, Abd-Rabou M, et al. Thinning and residual stresses of sheet metal in the deep drawing process. Mater Design 2014; 55: 869–879. https://doi.org/10.1016/j.matdes.2013.10.055
[10] Ortega S, Papula S, Saukkonen T, et al. Characterization of delayed cracking in deep-drawn Swift cups of metastable austenitic stainless steels. Fatigue Fract Eng Mater Struct 2015; 38(1): 29–39. https://doi.org/10.1111/ffe.12206
[11] Danckert J. Reduction of the residual stresses in a deep-drawn cup by modifying the draw die profile. CIRP Ann Manuf Technol 1995; 44(1): 259–262. https://doi.org/10.1016/S0007-8506(07)62321-X
[12] Xu Y, Kang D. Investigation of SUS304 stainless steel with warm hydro-mechanical deep drawing. J Mater Sci Technol 2009; 20(01): 92-93.
[13] Tan CJ, Ibrahim MS, Muhamad MR. Preventing delayed cracks in SUS304 deep drawn cups using extreme blank holding forces aided by nanolubrication. Int J Adv Manuf Technol 2019; 100: 1341–1354. https://doi.org/10.1007/s00170-018-2772-5
[14] Tan CJ, Aslian A, Abe Y, et al. Improved seizure resistance of ultra-high-strength steel ironed cups with a lubricant containing SiO2 nanoparticles. Int J Adv Manuf Technol 2016; 87: 1705-1711. https://dx.doi.org/10.1007/s00170-016-8588-2
[15] Tan CJ, Abe Y, Daodon W, et al. Increase in ironing limit of aluminium alloy cups with lubricants containing nanoparticles. J Mater Process Technol 2016; 229: 804-813. http://dx.doi.org/10.1016/j.jmatprotec.2015.10.032
[16] Abe Y, Ohmi T, Mori K, et al. Improvement of formability in deep drawing of ultra-high strength steel sheets by coating of die. J Mater Process Technol 2014; 214(9): 1838–1843. https://doi.org/10.1016/j.jmatprotec.2014.03.023
[17] Zhang H, Lu B, Chen J, et al. Thickness control in a new flexible hybrid incremental sheet forming process. P I Mech Eng B J Eng 2017; 231(5):779–791. https://doi.org/10.1177/0954405417694061
[18] Tandon P, Sharma ON. Experimental investigation into a new hybrid-forming process: incremental stretch drawing. P I Mech Eng B J Eng 2018; 232(3): 475-486. https://doi.org/10.1177/0954405416645983
[19] Zhang S, Zhu W. TiN coating of tool steels: a review. J Mater Process Technol 1993; 39(1-2): 165-177. https://doi.org/10.1016/0924-136(93)90016-Y
[20] Abe Y, Mori K, Hatashita F, et al. Improvement of seizure resistance in ironing of stainless steel cup with cermet die having fine lubricant pockets. J Mater Process Technol 2016; 234: 195-207. https://doi.org/10.1016/j.jmatprotec.2016.03.017
[21] Takalkar Atul S, Lenin Babu MC. A review on effect of thinning, wrinkling and spring-back on deep drawing process. P I Mech Eng B J Eng 2019; 233(4): 1011-1036. https://doi.org/10.1177/0954405417752509
[22] Hajiahmadi S, Elyasi M, Shakeri M. Evaluation of drawing force by a new dimensionless method in deep drawing process. P I Mech Eng B J Eng 2020; 234(13), 1604-1614. https://doi.org/10.1177/0954405420929770
[23] Numchoak S, Warit S, Krittatee S, et al. Wear characteristics of die surface in deep drawing of stainless steel 304 by using finite element simulation. MATEC Web Conf. 2018; 192; 01040. https://doi.org/10.1051/matecconf/201819201040